GCG default parameter settings
# SCIP version 6.0.0
# branching score function ('s'um, 'p'roduct, 'q'uotient)
# [type: char, advanced: TRUE, range: {spq}, default: p]
branching/scorefunc = p
# branching score factor to weigh downward and upward gain prediction in sum score function
# [type: real, advanced: TRUE, range: [0,1], default: 0.167]
branching/scorefac = 0.167
# should branching on binary variables be preferred?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
branching/preferbinary = FALSE
# minimal relative distance of branching point to bounds when branching on a continuous variable
# [type: real, advanced: FALSE, range: [0,0.5], default: 0.2]
branching/clamp = 0.2
# strategy for normalization of LP gain when updating pseudocosts of continuous variables (divide by movement of 'l'p value, reduction in 'd'omain width, or reduction in domain width of 's'ibling)
# [type: char, advanced: FALSE, range: {dls}, default: s]
branching/lpgainnormalize = s
# should updating pseudo costs for continuous variables be delayed to the time after separation?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
branching/delaypscostupdate = TRUE
# should pseudo costs be updated also in diving and probing mode?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
branching/divingpscost = TRUE
# should all strong branching children be regarded even if one is detected to be infeasible? (only with propagation)
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
branching/forceallchildren = FALSE
# child node to be regarded first during strong branching (only with propagation): 'u'p child, 'd'own child, 'h'istory-based, or 'a'utomatic
# [type: char, advanced: TRUE, range: {aduh}, default: a]
branching/firstsbchild = a
# should LP solutions during strong branching with propagation be checked for feasibility?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
branching/checksol = TRUE
# should LP solutions during strong branching with propagation be rounded? (only when checksbsol=TRUE)
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
branching/roundsbsol = TRUE
# score adjustment near zero by adding epsilon (TRUE) or using maximum (FALSE)
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
branching/sumadjustscore = FALSE
# should automatic tree compression after the presolving be enabled?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
compression/enable = FALSE
# should conflict analysis be enabled?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
conflict/enable = TRUE
# should conflicts based on an old cutoff bound be removed from the conflict pool after improving the primal bound?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/cleanboundexceedings = TRUE
# should propagation conflict analysis be used?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
conflict/useprop = FALSE fix
# should infeasible LP conflict analysis be used? ('o'ff, 'c'onflict graph, 'd'ual ray, 'b'oth conflict graph and dual ray)
# [type: char, advanced: FALSE, range: {ocdb}, default: b]
conflict/useinflp = b
# should bound exceeding LP conflict analysis be used? ('o'ff, 'c'onflict graph, 'd'ual ray, 'b'oth conflict graph and dual ray)
# [type: char, advanced: FALSE, range: {ocdb}, default: b]
conflict/useboundlp = b
# should infeasible/bound exceeding strong branching conflict analysis be used?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
conflict/usesb = TRUE
# should pseudo solution conflict analysis be used?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
conflict/usepseudo = TRUE
# maximal fraction of variables involved in a conflict constraint
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.15]
conflict/maxvarsfac = 0.15
# minimal absolute maximum of variables involved in a conflict constraint
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
conflict/minmaxvars = 0
# maximal number of LP resolving loops during conflict analysis (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 2]
conflict/maxlploops = 2
# maximal number of LP iterations in each LP resolving loop (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
conflict/lpiterations = 10
# number of depth levels up to which first UIP's are used in conflict analysis (-1: use All-FirstUIP rule)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
conflict/fuiplevels = -1
# maximal number of intermediate conflict constraints generated in conflict graph (-1: use every intermediate constraint)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
conflict/interconss = -1
# number of depth levels up to which UIP reconvergence constraints are generated (-1: generate reconvergence constraints in all depth levels)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
conflict/reconvlevels = -1
# maximal number of conflict constraints accepted at an infeasible node (-1: use all generated conflict constraints)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
conflict/maxconss = 10
# maximal size of conflict store (-1: auto, 0: disable storage)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10000]
conflict/maxstoresize = 10000
# should binary conflicts be preferred?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
conflict/preferbinary = FALSE
# prefer infeasibility proof to boundexceeding proof
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/prefinfproof = TRUE
# should conflict constraints be generated that are only valid locally?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/allowlocal = TRUE
# should conflict constraints be attached only to the local subtree where they can be useful?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
conflict/settlelocal = FALSE
# should earlier nodes be repropagated in order to replace branching decisions by deductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/repropagate = TRUE
# should constraints be kept for repropagation even if they are too long?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/keepreprop = TRUE
# should the conflict constraints be separated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/separate = TRUE
# should the conflict constraints be subject to aging?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/dynamic = TRUE
# should the conflict's relaxations be subject to LP aging and cleanup?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/removable = TRUE
# score factor for depth level in bound relaxation heuristic
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 1]
conflict/graph/depthscorefac = 1
# score factor for impact on acticity in bound relaxation heuristic
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 1]
conflict/proofscorefac = 1
# score factor for up locks in bound relaxation heuristic
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 0]
conflict/uplockscorefac = 0
# score factor for down locks in bound relaxation heuristic
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 0]
conflict/downlockscorefac = 0
# factor to decrease importance of variables' earlier conflict scores
# [type: real, advanced: TRUE, range: [1e-06,1], default: 0.98]
conflict/scorefac = 0.98
# number of successful conflict analysis calls that trigger a restart (0: disable conflict restarts)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
conflict/restartnum = 0
# factor to increase restartnum with after each restart
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 1.5]
conflict/restartfac = 1.5
# should relaxed bounds be ignored?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
conflict/ignorerelaxedbd = FALSE
# maximal number of variables to try to detect global bound implications and shorten the whole conflict set (0: disabled)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 250]
conflict/maxvarsdetectimpliedbounds = 250
# try to shorten the whole conflict set or terminate early (depending on the 'maxvarsdetectimpliedbounds' parameter)
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
conflict/fullshortenconflict = TRUE
# the weight the VSIDS score is weight by updating the VSIDS for a variable if it is part of a conflict
# [type: real, advanced: FALSE, range: [0,1], default: 0]
conflict/conflictweight = 0
# the weight the VSIDS score is weight by updating the VSIDS for a variable if it is part of a conflict graph
# [type: real, advanced: FALSE, range: [0,1], default: 1]
conflict/conflictgraphweight = 1
# minimal improvement of primal bound to remove conflicts based on a previous incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.05]
conflict/minimprove = 0.05
# weight of the size of a conflict used in score calculation
# [type: real, advanced: TRUE, range: [0,1], default: 0.001]
conflict/weightsize = 0.001
# weight of the repropagation depth of a conflict used in score calculation
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
conflict/weightrepropdepth = 0.1
# weight of the valid depth of a conflict used in score calculation
# [type: real, advanced: TRUE, range: [0,1], default: 1]
conflict/weightvaliddepth = 1
# apply cut generating functions to construct alternative proofs
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
conflict/sepaaltproofs = FALSE
# maximum age an unnecessary constraint can reach before it is deleted (0: dynamic, -1: keep all constraints)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 0]
constraints/agelimit = 0
# age of a constraint after which it is marked obsolete (0: dynamic, -1 do not mark constraints obsolete)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
constraints/obsoleteage = -1
# should enforcement of pseudo solution be disabled?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/disableenfops = FALSE
# verbosity level of output
# [type: int, advanced: FALSE, range: [0,5], default: 4]
display/verblevel = 4
# maximal number of characters in a node information line
# [type: int, advanced: FALSE, range: [0,2147483647], default: 139]
display/width = 139
# frequency for displaying node information lines
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 100]
display/freq = 100
# frequency for displaying header lines (every n'th node information line)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 15]
display/headerfreq = 15
# should the LP solver display status messages?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
display/lpinfo = FALSE
# display all violations for a given start solution / the best solution after the solving process?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
display/allviols = FALSE
# should the relevant statistics be displayed at the end of solving?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
display/relevantstats = TRUE
# should statistics be collected for variable domain value pairs?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
history/valuebased = FALSE
# should variable histories be merged from sub-SCIPs whenever possible?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
history/allowmerge = FALSE
# should variable histories be transferred to initialize SCIP copies?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
history/allowtransfer = FALSE
# maximal time in seconds to run
# [type: real, advanced: FALSE, range: [0,1e+20], default: 1e+20]
limits/time = 1e+20
# maximal number of nodes to process (-1: no limit)
# [type: longint, advanced: FALSE, range: [-1,9223372036854775807], default: -1]
limits/nodes = -1
# maximal number of total nodes (incl. restarts) to process (-1: no limit)
# [type: longint, advanced: FALSE, range: [-1,9223372036854775807], default: -1]
limits/totalnodes = -1
# solving stops, if the given number of nodes was processed since the last improvement of the primal solution value (-1: no limit)
# [type: longint, advanced: FALSE, range: [-1,9223372036854775807], default: -1]
limits/stallnodes = -1
# maximal memory usage in MB; reported memory usage is lower than real memory usage!
# [type: real, advanced: FALSE, range: [0,8796093022208], default: 8796093022208]
limits/memory = 8796093022208
# solving stops, if the relative gap = |primal - dual|/MIN(|dual|,|primal|) is below the given value
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0]
limits/gap = 0
# solving stops, if the absolute gap = |primalbound - dualbound| is below the given value
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0]
limits/absgap = 0
# solving stops, if the given number of solutions were found (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
limits/solutions = -1
# solving stops, if the given number of solution improvements were found (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
limits/bestsol = -1
# maximal number of solutions to store in the solution storage
# [type: int, advanced: FALSE, range: [1,2147483647], default: 100]
limits/maxsol = 100
# maximal number of solutions candidates to store in the solution storage of the original problem
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
limits/maxorigsol = 10
# solving stops, if the given number of restarts was triggered (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
limits/restarts = -1
# if solve exceeds this number of nodes for the first time, an automatic restart is triggered (-1: no automatic restart)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
limits/autorestartnodes = -1
# frequency for solving LP at the nodes (-1: never; 0: only root LP)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
lp/solvefreq = 1
# iteration limit for each single LP solve (-1: no limit)
# [type: longint, advanced: TRUE, range: [-1,9223372036854775807], default: -1]
lp/iterlim = -1
# iteration limit for initial root LP solve (-1: no limit)
# [type: longint, advanced: TRUE, range: [-1,9223372036854775807], default: -1]
lp/rootiterlim = -1
# maximal depth for solving LP at the nodes (-1: no depth limit)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
lp/solvedepth = -1
# LP algorithm for solving initial LP relaxations (automatic 's'implex, 'p'rimal simplex, 'd'ual simplex, 'b'arrier, barrier with 'c'rossover)
# [type: char, advanced: FALSE, range: {spdbc}, default: s]
lp/initalgorithm = s
# LP algorithm for resolving LP relaxations if a starting basis exists (automatic 's'implex, 'p'rimal simplex, 'd'ual simplex, 'b'arrier, barrier with 'c'rossover)
# [type: char, advanced: FALSE, range: {spdbc}, default: s]
lp/resolvealgorithm = s
# LP pricing strategy ('l'pi default, 'a'uto, 'f'ull pricing, 'p'artial, 's'teepest edge pricing, 'q'uickstart steepest edge pricing, 'd'evex pricing)
# [type: char, advanced: FALSE, range: {lafpsqd}, default: l]
lp/pricing = l
# should lp state be cleared at the end of probing mode when lp was initially unsolved, e.g., when called right after presolving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/clearinitialprobinglp = TRUE
# should the LP be resolved to restore the state at start of diving (if FALSE we buffer the solution values)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
lp/resolverestore = FALSE
# should the buffers for storing LP solution values during diving be freed at end of diving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
lp/freesolvalbuffers = FALSE
# maximum age a dynamic column can reach before it is deleted from the LP (-1: don't delete columns due to aging)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
lp/colagelimit = 10
# maximum age a dynamic row can reach before it is deleted from the LP (-1: don't delete rows due to aging)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
lp/rowagelimit = 10
# should new non-basic columns be removed after LP solving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
lp/cleanupcols = FALSE
# should new non-basic columns be removed after root LP solving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
lp/cleanupcolsroot = FALSE
# should new basic rows be removed after LP solving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/cleanuprows = TRUE
# should new basic rows be removed after root LP solving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/cleanuprowsroot = TRUE
# should LP solver's return status be checked for stability?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/checkstability = TRUE
# maximum condition number of LP basis counted as stable (-1.0: no limit)
# [type: real, advanced: TRUE, range: [-1,1.79769313486232e+308], default: -1]
lp/conditionlimit = -1
# should LP solutions be checked for primal feasibility, resolving LP when numerical troubles occur?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/checkprimfeas = TRUE
# should LP solutions be checked for dual feasibility, resolving LP when numerical troubles occur?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/checkdualfeas = TRUE
# should infeasibility proofs from the LP be checked?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/checkfarkas = TRUE
# which FASTMIP setting of LP solver should be used? 0: off, 1: low
# [type: int, advanced: TRUE, range: [0,1], default: 1]
lp/fastmip = 1
# LP scaling (0: none, 1: normal, 2: aggressive)
# [type: int, advanced: TRUE, range: [0,2], default: 1]
lp/scaling = 1
# should presolving of LP solver be used?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/presolving = TRUE
# should the lexicographic dual algorithm be used?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
lp/lexdualalgo = FALSE
# should the lexicographic dual algorithm be applied only at the root node
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/lexdualrootonly = TRUE
# maximum number of rounds in the lexicographic dual algorithm (-1: unbounded)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 2]
lp/lexdualmaxrounds = 2
# choose fractional basic variables in lexicographic dual algorithm?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
lp/lexdualbasic = FALSE
# turn on the lex dual algorithm only when stalling?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
lp/lexdualstalling = TRUE
# disable the cutoff bound in the LP solver? (0: enabled, 1: disabled, 2: auto)
# [type: int, advanced: TRUE, range: [0,2], default: 2]
lp/disablecutoff = 2
# simplex algorithm shall use row representation of the basis if number of rows divided by number of columns exceeds this value (-1.0 to disable row representation)
# [type: real, advanced: TRUE, range: [-1,1.79769313486232e+308], default: 1.2]
lp/rowrepswitch = 1.2
# number of threads used for solving the LP (0: automatic)
# [type: int, advanced: TRUE, range: [0,64], default: 0]
lp/threads = 0
# factor of average LP iterations that is used as LP iteration limit for LP resolve (-1: unlimited)
# [type: real, advanced: TRUE, range: [-1,1.79769313486232e+308], default: -1]
lp/resolveiterfac = -1
# minimum number of iterations that are allowed for LP resolve
# [type: int, advanced: TRUE, range: [1,2147483647], default: 1000]
lp/resolveitermin = 1000
# LP solution polishing method (0: disabled, 1: only root, 2: always, 3: auto)
# [type: int, advanced: TRUE, range: [0,3], default: 3]
lp/solutionpolishing = 3
# LP refactorization interval (0: auto)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
lp/refactorinterval = 0
# should the Farkas duals always be collected when an LP is found to be infeasible?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
lp/alwaysgetduals = FALSE
# solver to use for solving NLPs; leave empty to select NLPI with highest priority
# [type: string, advanced: FALSE, default: ""]
nlp/solver = ""
# should the NLP relaxation be always disabled (also for NLPs/MINLPs)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
nlp/disable = FALSE
# fraction of maximal memory usage resulting in switch to memory saving mode
# [type: real, advanced: FALSE, range: [0,1], default: 0.8]
memory/savefac = 0.8
# memory growing factor for dynamically allocated arrays
# [type: real, advanced: TRUE, range: [1,10], default: 1.2]
memory/arraygrowfac = 1.2
# initial size of dynamically allocated arrays
# [type: int, advanced: TRUE, range: [0,2147483647], default: 4]
memory/arraygrowinit = 4
# memory growing factor for tree array
# [type: real, advanced: TRUE, range: [1,10], default: 2]
memory/treegrowfac = 2
# initial size of tree array
# [type: int, advanced: TRUE, range: [0,2147483647], default: 65536]
memory/treegrowinit = 65536
# memory growing factor for path array
# [type: real, advanced: TRUE, range: [1,10], default: 2]
memory/pathgrowfac = 2
# initial size of path array
# [type: int, advanced: TRUE, range: [0,2147483647], default: 256]
memory/pathgrowinit = 256
# should the CTRL-C interrupt be caught by SCIP?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/catchctrlc = TRUE
# should a hashtable be used to map from variable names to variables?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/usevartable = TRUE
# should a hashtable be used to map from constraint names to constraints?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/useconstable = TRUE
# should smaller hashtables be used? yields better performance for small problems with about 100 variables
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
misc/usesmalltables = FALSE
# should the statistics be reset if the transformed problem is freed (in case of a Benders' decomposition this parameter should be set to FALSE)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/resetstat = TRUE
# should only solutions be checked which improve the primal bound
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
misc/improvingsols = FALSE
# should the reason be printed if a given start solution is infeasible
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/printreason = TRUE
# should the usage of external memory be estimated?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/estimexternmem = TRUE
# should SCIP try to transfer original solutions to the transformed space (after presolving)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/transorigsols = TRUE
# should SCIP try to transfer transformed solutions to the original space (after solving)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/transsolsorig = TRUE
# should SCIP calculate the primal dual integral value?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/calcintegral = TRUE
# should SCIP try to remove infinite fixings from solutions copied to the solution store?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
misc/finitesolutionstore = FALSE
# should the best solution be transformed to the orignal space and be output in command line run?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/outputorigsol = TRUE
# should dual reductions in propagation methods and presolver be allowed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/allowdualreds = TRUE
# should propagation to the current objective be allowed in propagation methods?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/allowobjprop = TRUE
# should the objective function be scaled so that it is always integer?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
misc/scaleobj = TRUE
# objective value for reference purposes
# [type: real, advanced: FALSE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 1e+99]
misc/referencevalue = 1e+99
# used symmetry handling technique (0: off; 1: polyhedral; 2: orbital fixing)
# [type: int, advanced: FALSE, range: [0,2], default: 2]
misc/usesymmetry = 2
# global shift of all random seeds in the plugins and the LP random seed
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
randomization/randomseedshift = 0
# seed value for permuting the problem after reading/transformation (0: no permutation)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
randomization/permutationseed = 0
# should order of constraints be permuted (depends on permutationseed)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
randomization/permuteconss = TRUE
# should order of variables be permuted (depends on permutationseed)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
randomization/permutevars = FALSE
# random seed for LP solver, e.g. for perturbations in the simplex (0: LP default)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
randomization/lpseed = 0
# child selection rule ('d'own, 'u'p, 'p'seudo costs, 'i'nference, 'l'p value, 'r'oot LP value difference, 'h'ybrid inference/root LP value difference)
# [type: char, advanced: FALSE, range: {dupilrh}, default: h]
nodeselection/childsel = h
# values larger than this are considered infinity
# [type: real, advanced: FALSE, range: [10000000000,1e+98], default: 1e+20]
numerics/infinity = 1e+20
# absolute values smaller than this are considered zero
# [type: real, advanced: FALSE, range: [1e-20,0.001], default: 1e-09]
numerics/epsilon = 1e-09
# absolute values of sums smaller than this are considered zero
# [type: real, advanced: FALSE, range: [1e-17,0.001], default: 1e-06]
numerics/sumepsilon = 1e-06
# feasibility tolerance for constraints
# [type: real, advanced: FALSE, range: [1e-17,0.001], default: 1e-06]
numerics/feastol = 1e-06
# feasibility tolerance factor; for checking the feasibility of the best solution
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 1]
numerics/checkfeastolfac = 1
# primal feasibility tolerance of LP solver
# [type: real, advanced: FALSE, range: [1e-17,0.001], default: 1e-06]
numerics/lpfeastol = 1e-06
# feasibility tolerance for reduced costs in LP solution
# [type: real, advanced: FALSE, range: [1e-17,0.001], default: 1e-07]
numerics/dualfeastol = 1e-07
# LP convergence tolerance used in barrier algorithm
# [type: real, advanced: TRUE, range: [1e-17,0.001], default: 1e-10]
numerics/barrierconvtol = 1e-10
# minimal relative improve for strengthening bounds
# [type: real, advanced: TRUE, range: [1e-17,1e+98], default: 0.05]
numerics/boundstreps = 0.05
# minimal variable distance value to use for branching pseudo cost updates
# [type: real, advanced: TRUE, range: [1e-17,1], default: 0.1]
numerics/pseudocosteps = 0.1
# minimal objective distance value to use for branching pseudo cost updates
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.0001]
numerics/pseudocostdelta = 0.0001
# minimal decrease factor that causes the recomputation of a value (e.g., pseudo objective) instead of an update
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 10000000]
numerics/recomputefac = 10000000
# values larger than this are considered huge and should be handled separately (e.g., in activity computation)
# [type: real, advanced: TRUE, range: [0,1e+98], default: 1e+15]
numerics/hugeval = 1e+15
# maximal number of presolving rounds (-1: unlimited, 0: off)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
presolving/maxrounds = -1
# abort presolve, if at most this fraction of the problem was changed in last presolve round
# [type: real, advanced: TRUE, range: [0,1], default: 0.0008]
presolving/abortfac = 0.0008
# maximal number of restarts (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
presolving/maxrestarts = -1
# fraction of integer variables that were fixed in the root node triggering a restart with preprocessing after root node evaluation
# [type: real, advanced: TRUE, range: [0,1], default: 0.025]
presolving/restartfac = 0.025
# fraction of integer variables that were fixed in the root node triggering an immediate restart with preprocessing
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
presolving/immrestartfac = 0.1
# fraction of integer variables that were globally fixed during the solving process triggering a restart with preprocessing
# [type: real, advanced: TRUE, range: [0,1], default: 1]
presolving/subrestartfac = 1
# minimal fraction of integer variables removed after restart to allow for an additional restart
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
presolving/restartminred = 0.1
# should multi-aggregation of variables be forbidden?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
presolving/donotmultaggr = FALSE
# should aggregation of variables be forbidden?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
presolving/donotaggr = FALSE
# maximal number of variables priced in per pricing round
# [type: int, advanced: FALSE, range: [1,2147483647], default: 100]
pricing/maxvars = 100
# maximal number of priced variables at the root node
# [type: int, advanced: FALSE, range: [1,2147483647], default: 2000]
pricing/maxvarsroot = 2000
# pricing is aborted, if fac * pricing/maxvars pricing candidates were found
# [type: real, advanced: FALSE, range: [1,1.79769313486232e+308], default: 2]
pricing/abortfac = 2
# should variables created at the current node be deleted when the node is solved in case they are not present in the LP anymore?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
pricing/delvars = FALSE
# should variables created at the root node be deleted when the root is solved in case they are not present in the LP anymore?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
pricing/delvarsroot = FALSE
# the tolerance used for checking optimality in Benders' decomposition. tol where optimality is given by LB + tol > UB.
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 1e-06]
benders/solutiontol = 1e-06
# should Benders' cuts be generated from the solution to the LP relaxation?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
benders/cutlpsol = TRUE
# should Benders' decomposition be copied for use in sub-SCIPs?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
benders/copybenders = TRUE
# maximal number of propagation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 100]
propagating/maxrounds = 100
# maximal number of propagation rounds in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1000]
propagating/maxroundsroot = 1000
# should propagation be aborted immediately? setting this to FALSE could help conflict analysis to produce more conflict constraints
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
propagating/abortoncutoff = TRUE
# should reoptimization used?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reoptimization/enable = FALSE
# maximal number of saved nodes
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 2147483647]
reoptimization/maxsavednodes = 2147483647
# maximal number of bound changes between two stored nodes on one path
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2147483647]
reoptimization/maxdiffofnodes = 2147483647
# save global constraints to separate infeasible subtrees.
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reoptimization/globalcons/sepainfsubtrees = TRUE
# separate the optimal solution, i.e., for constrained shortest path
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
reoptimization/sepabestsol = FALSE
# use variable history of the previous solve if the objctive function has changed only slightly
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
reoptimization/storevarhistory = FALSE
# re-use pseudo costs if the objective function changed only slightly
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
reoptimization/usepscost = FALSE
# at which reopttype should the LP be solved? (1: transit, 3: strong branched, 4: w/ added logicor, 5: only leafs).
# [type: int, advanced: TRUE, range: [1,5], default: 1]
reoptimization/solvelp = 1
# maximal number of bound changes at node to skip solving the LP
# [type: int, advanced: TRUE, range: [0,2147483647], default: 1]
reoptimization/solvelpdiff = 1
# number of best solutions which should be saved for the following runs. (-1: save all)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2147483647]
reoptimization/savesols = 2147483647
# similarity of two sequential objective function to disable solving the root LP.
# [type: real, advanced: TRUE, range: [-1,1], default: 0.8]
reoptimization/objsimrootLP = 0.8
# similarity of two objective functions to re-use stored solutions
# [type: real, advanced: TRUE, range: [-1,1], default: -1]
reoptimization/objsimsol = -1
# minimum similarity for using reoptimization of the search tree.
# [type: real, advanced: TRUE, range: [-1,1], default: -1]
reoptimization/delay = -1
# time limit over all reoptimization rounds?.
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
reoptimization/commontimelimit = FALSE
# replace branched inner nodes by their child nodes, if the number of bound changes is not to large
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reoptimization/shrinkinner = TRUE
# try to fix variables at the root node before reoptimizing by probing like strong branching
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reoptimization/strongbranchinginit = TRUE
# delete stored nodes which were not reoptimized
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reoptimization/reducetofrontier = TRUE
# force a restart if the last n optimal solutions were found by heuristic reoptsols
# [type: int, advanced: TRUE, range: [1,2147483647], default: 3]
reoptimization/forceheurrestart = 3
# save constraint propagations
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
reoptimization/saveconsprop = FALSE
# use constraints to reconstruct the subtree pruned be dual reduction when reactivating the node
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reoptimization/usesplitcons = TRUE
# use 'd'efault, 'r'andom or a variable ordering based on 'i'nference score for interdiction branching used during reoptimization
# [type: char, advanced: TRUE, range: {dir}, default: d]
reoptimization/varorderinterdiction = d
# reoptimize cuts found at the root node
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
reoptimization/usecuts = FALSE
# maximal age of a cut to be use for reoptimization
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
reoptimization/maxcutage = 0
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separation (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: FALSE, range: [0,1], default: 1]
separating/maxbounddist = 1
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying local separation (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: FALSE, range: [0,1], default: 0]
separating/maxlocalbounddist = 0
# maximal ratio between coefficients in strongcg, cmir, and flowcover cuts
# [type: real, advanced: FALSE, range: [1,1e+98], default: 10000]
separating/maxcoefratio = 10000
# minimal efficacy for a cut to enter the LP
# [type: real, advanced: FALSE, range: [0,1e+98], default: 0.0001]
separating/minefficacy = 0.0001
# minimal efficacy for a cut to enter the LP in the root node
# [type: real, advanced: FALSE, range: [0,1e+98], default: 0.0001]
separating/minefficacyroot = 0.0001
# minimal orthogonality for a cut to enter the LP
# [type: real, advanced: FALSE, range: [0,1], default: 0.9]
separating/minortho = 0.9
# minimal orthogonality for a cut to enter the LP in the root node
# [type: real, advanced: FALSE, range: [0,1], default: 0.9]
separating/minorthoroot = 0.9
# factor to scale objective parallelism of cut in separation score calculation
# [type: real, advanced: TRUE, range: [0,1e+98], default: 0.1]
separating/objparalfac = 0.1
# factor to scale directed cutoff distance of cut in score calculation
# [type: real, advanced: TRUE, range: [0,1e+98], default: 0.5]
separating/dircutoffdistfac = 0.5
# factor to scale directed cutoff distance of cut in score calculation
# [type: real, advanced: TRUE, range: [0,1e+98], default: 1]
separating/efficacyfac = 1
# factor to scale integral support of cut in separation score calculation
# [type: real, advanced: TRUE, range: [0,1e+98], default: 0.1]
separating/intsupportfac = 0.1
# minimum cut activity quotient to convert cuts into constraints during a restart (0.0: all cuts are converted)
# [type: real, advanced: FALSE, range: [0,1], default: 0.8]
separating/minactivityquot = 0.8
# function used for calc. scalar prod. in orthogonality test ('e'uclidean, 'd'iscrete)
# [type: char, advanced: TRUE, range: {ed}, default: e]
separating/orthofunc = e
# row norm to use for efficacy calculation ('e'uclidean, 'm'aximum, 's'um, 'd'iscrete)
# [type: char, advanced: TRUE, range: {emsd}, default: e]
separating/efficacynorm = e
# cut selection during restart ('a'ge, activity 'q'uotient)
# [type: char, advanced: TRUE, range: {aq}, default: a]
separating/cutselrestart = a
# cut selection for sub SCIPs ('a'ge, activity 'q'uotient)
# [type: char, advanced: TRUE, range: {aq}, default: a]
separating/cutselsubscip = a
# maximal number of runs for which separation is enabled (-1: unlimited)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
separating/maxruns = -1
# maximal number of separation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
separating/maxrounds = -1
# maximal number of separation rounds in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
separating/maxroundsroot = -1
# maximal number of separation rounds in the root node of a subsequent run (-1: unlimited)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
separating/maxroundsrootsubrun = -1
# maximal additional number of separation rounds in subsequent price-and-cut loops (-1: no additional restriction)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 1]
separating/maxaddrounds = 1
# maximal number of consecutive separation rounds without objective or integrality improvement in local nodes (-1: no additional restriction)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1]
separating/maxstallrounds = 1
# maximal number of consecutive separation rounds without objective or integrality improvement in the root node (-1: no additional restriction)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 10]
separating/maxstallroundsroot = 10
# maximal number of consecutive separation rounds that increase the size of the LP relaxation per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 20]
separating/maxincrounds = 20
# maximal number of cuts separated per separation round (0: disable local separation)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100]
separating/maxcuts = 100
# maximal number of separated cuts at the root node (0: disable root node separation)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2000]
separating/maxcutsroot = 2000
# maximum age a cut can reach before it is deleted from the global cut pool, or -1 to keep all cuts
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 80]
separating/cutagelimit = 80
# separation frequency for the global cut pool (-1: disable global cut pool, 0: only separate pool at the root)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
separating/poolfreq = 10
# parallel optimisation mode, 0: opportunistic or 1: deterministic.
# [type: int, advanced: FALSE, range: [0,1], default: 1]
parallel/mode = 1
# the minimum number of threads used during parallel solve
# [type: int, advanced: FALSE, range: [0,64], default: 1]
parallel/minnthreads = 1
# the maximum number of threads used during parallel solve
# [type: int, advanced: FALSE, range: [0,64], default: 8]
parallel/maxnthreads = 8
# set different random seeds in each concurrent solver?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
concurrent/changeseeds = TRUE
# use different child selection rules in each concurrent solver?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
concurrent/changechildsel = TRUE
# should the concurrent solvers communicate global variable bound changes?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
concurrent/commvarbnds = TRUE
# should the problem be presolved before it is copied to the concurrent solvers?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
concurrent/presolvebefore = TRUE
# maximum number of solutions that will be shared in a one synchronization
# [type: int, advanced: FALSE, range: [0,2147483647], default: 5131912]
concurrent/initseed = 5131912
# initial frequency of synchronization with other threads
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 10]
concurrent/sync/freqinit = 10
# maximal frequency of synchronization with other threads
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 10]
concurrent/sync/freqmax = 10
# factor by which the frequency of synchronization is changed
# [type: real, advanced: FALSE, range: [1,1.79769313486232e+308], default: 1.5]
concurrent/sync/freqfactor = 1.5
# when adapting the synchronization frequency this value is the targeted relative difference by which the absolute gap decreases per synchronization
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.001]
concurrent/sync/targetprogress = 0.001
# maximum number of solutions that will be shared in a single synchronization
# [type: int, advanced: FALSE, range: [0,1000], default: 3]
concurrent/sync/maxnsols = 3
# maximum number of synchronizations before reading is enforced regardless of delay
# [type: int, advanced: TRUE, range: [0,100], default: 7]
concurrent/sync/maxnsyncdelay = 7
# minimum delay before synchronization data is read
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 10]
concurrent/sync/minsyncdelay = 10
# how many of the N best solutions should be considered for synchronization?
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
concurrent/sync/nbestsols = 10
# path prefix for parameter setting files of concurrent solvers
# [type: string, advanced: FALSE, default: ""]
concurrent/paramsetprefix = ""
# default clock type (1: CPU user seconds, 2: wall clock time)
# [type: int, advanced: FALSE, range: [1,2], default: 1]
timing/clocktype = 1
# is timing enabled?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
timing/enabled = TRUE
# belongs reading time to solving time?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
timing/reading = FALSE
# should clock checks of solving time be performed less frequently (note: time limit could be exceeded slightly)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
timing/rareclockcheck = FALSE
# should timing for statistic output be performed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
timing/statistictiming = TRUE
# name of the VBC tool output file, or - if no VBC tool output should be created
# [type: string, advanced: FALSE, default: "-"]
visual/vbcfilename = "-"
# name of the BAK tool output file, or - if no BAK tool output should be created
# [type: string, advanced: FALSE, default: "-"]
visual/bakfilename = "-"
# should the real solving time be used instead of a time step counter in visualization?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
visual/realtime = TRUE
# should the node where solutions are found be visualized?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
visual/dispsols = FALSE
# should lower bound information be visualized?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
visual/displb = FALSE
# should be output the external value of the objective?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
visual/objextern = TRUE
# should model constraints be marked as initial?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reading/initialconss = TRUE
# should model constraints be subject to aging?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reading/dynamicconss = TRUE
# should columns be added and removed dynamically to the LP?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/dynamiccols = FALSE
# should rows be added and removed dynamically to the LP?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/dynamicrows = FALSE
# should all constraints be written (including the redundant constraints)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
write/allconss = FALSE
# should variables set to zero be printed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
write/printzeros = FALSE
# when writing a generic problem the index for the first variable should start with?
# [type: int, advanced: FALSE, range: [0,1073741823], default: 0]
write/genericnamesoffset = 0
# priority of conflict handler <linear>
# [type: int, advanced: TRUE, range: [-2147483648,2147483647], default: -1000000]
conflict/linear/priority = -1000000
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
constraints/linear/sepafreq = 0
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
constraints/linear/propfreq = 1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/linear/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: 100]
constraints/linear/eagerfreq = 100
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
constraints/linear/maxprerounds = -1
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/linear/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/linear/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 20]
constraints/linear/presoltiming = 20
# multiplier on propagation frequency, how often the bounds are tightened (-1: never, 0: only at root)
# [type: int, advanced: TRUE, range: [-1,65534], default: 1]
constraints/linear/tightenboundsfreq = 1
# maximal number of separation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 5]
constraints/linear/maxrounds = 5
# maximal number of separation rounds per node in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
constraints/linear/maxroundsroot = -1
# maximal number of cuts separated per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 50]
constraints/linear/maxsepacuts = 50
# maximal number of cuts separated per separation round in the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 200]
constraints/linear/maxsepacutsroot = 200
# should pairwise constraint comparison be performed in presolving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/presolpairwise = TRUE
# should hash table be used for detecting redundant constraints in advance
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/presolusehashing = TRUE
# number for minimal pairwise presolve comparisons
# [type: int, advanced: TRUE, range: [1,2147483647], default: 200000]
constraints/linear/nmincomparisons = 200000
# minimal gain per minimal pairwise presolve comparisons to repeat pairwise comparison round
# [type: real, advanced: TRUE, range: [0,1], default: 1e-06]
constraints/linear/mingainpernmincomparisons = 1e-06
# maximal allowed relative gain in maximum norm for constraint aggregation (0.0: disable constraint aggregation)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
constraints/linear/maxaggrnormscale = 0
# maximum activity delta to run easy propagation on linear constraint (faster, but numerically less stable)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 1000000]
constraints/linear/maxeasyactivitydelta = 1000000
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for separating knapsack cardinality cuts
# [type: real, advanced: TRUE, range: [0,1], default: 0]
constraints/linear/maxcardbounddist = 0
# should all constraints be subject to cardinality cut generation instead of only the ones with non-zero dual value?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
constraints/linear/separateall = FALSE
# should presolving search for aggregations in equations
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/aggregatevariables = TRUE
# should presolving try to simplify inequalities
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/simplifyinequalities = TRUE
# should dual presolving steps be performed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/dualpresolving = TRUE
# should stuffing of singleton continuous variables be performed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/singletonstuffing = TRUE
# should single variable stuffing be performed, which tries to fulfill constraints using the cheapest variable?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/linear/singlevarstuffing = FALSE
# apply binaries sorting in decr. order of coeff abs value?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/sortvars = TRUE
# should the violation for a constraint with side 0.0 be checked relative to 1.0 (FALSE) or to the maximum absolute value in the activity (TRUE)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/linear/checkrelmaxabs = FALSE
# should presolving try to detect constraints parallel to the objective function defining an upper bound and prevent these constraints from entering the LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/detectcutoffbound = TRUE
# should presolving try to detect constraints parallel to the objective function defining a lower bound and prevent these constraints from entering the LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/detectlowerbound = TRUE
# should presolving try to detect subsets of constraints parallel to the objective function?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/detectpartialobjective = TRUE
# should presolving and propagation try to improve bounds, detect infeasibility, and extract sub-constraints from ranged rows and equations?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/rangedrowpropagation = TRUE
# should presolving and propagation extract sub-constraints from ranged rows and equations?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/rangedrowartcons = TRUE
# maximum depth to apply ranged row propagation
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2147483647]
constraints/linear/rangedrowmaxdepth = 2147483647
# frequency for applying ranged row propagation
# [type: int, advanced: TRUE, range: [1,65534], default: 1]
constraints/linear/rangedrowfreq = 1
# should multi-aggregations only be performed if the constraint can be removed afterwards?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/linear/multaggrremove = FALSE
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
constraints/indicator/sepafreq = 10
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
constraints/indicator/propfreq = 1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/indicator/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: 100]
constraints/indicator/eagerfreq = 100
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
constraints/indicator/maxprerounds = -1
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 4]
constraints/indicator/presoltiming = 4
# enable linear upgrading for constraint handler <indicator>
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/upgrade/indicator = TRUE
# priority of conflict handler <indicatorconflict>
# [type: int, advanced: TRUE, range: [-2147483648,2147483647], default: 200000]
conflict/indicatorconflict/priority = 200000
# Branch on indicator constraints in enforcing?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/branchindicators = FALSE
# Generate logicor constraints instead of cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/genlogicor = FALSE
# Add coupling constraints or rows if big-M is small enough?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/indicator/addcoupling = TRUE
# maximum coefficient for binary variable in coupling constraint
# [type: real, advanced: TRUE, range: [0,1000000000], default: 10000]
constraints/indicator/maxcouplingvalue = 10000
# Add initial variable upper bound constraints, if 'addcoupling' is true?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/addcouplingcons = FALSE
# Should the coupling inequalities be separated dynamically?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/indicator/sepacouplingcuts = TRUE
# Allow to use local bounds in order to separate coupling inequalities?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/sepacouplinglocal = FALSE
# maximum coefficient for binary variable in separated coupling constraint
# [type: real, advanced: TRUE, range: [0,1000000000], default: 10000]
constraints/indicator/sepacouplingvalue = 10000
# Separate cuts based on perspective formulation?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/sepaperspective = FALSE
# Allow to use local bounds in order to separate perspective cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/indicator/sepapersplocal = TRUE
# maximal number of separated non violated IISs, before separation is stopped
# [type: int, advanced: FALSE, range: [0,2147483647], default: 3]
constraints/indicator/maxsepanonviolated = 3
# Update bounds of original variables for separation?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/updatebounds = FALSE
# maximum estimated condition of the solution basis matrix of the alternative LP to be trustworthy (0.0 to disable check)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
constraints/indicator/maxconditionaltlp = 0
# maximal number of cuts separated per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100]
constraints/indicator/maxsepacuts = 100
# maximal number of cuts separated per separation round in the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2000]
constraints/indicator/maxsepacutsroot = 2000
# Remove indicator constraint if corresponding variable bound constraint has been added?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/removeindicators = FALSE
# Do not generate indicator constraint, but a bilinear constraint instead?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/generatebilinear = FALSE
# Scale slack variable coefficient at construction time?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/scaleslackvar = FALSE
# Try to make solutions feasible by setting indicator variables?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/indicator/trysolutions = TRUE
# In enforcing try to generate cuts (only if sepaalternativelp is true)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/enforcecuts = FALSE
# Should dual reduction steps be performed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/indicator/dualreductions = TRUE
# Add opposite inequality in nodes in which the binary variable has been fixed to 0?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/addopposite = FALSE
# Try to upgrade bounddisjunction conflicts by replacing slack variables?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/conflictsupgrade = FALSE
# fraction of binary variables that need to be fixed before restart occurs (in forcerestart)
# [type: real, advanced: TRUE, range: [0,1], default: 0.9]
constraints/indicator/restartfrac = 0.9
# Collect other constraints to alternative LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/useotherconss = FALSE
# Use objective cut with current best solution to alternative LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/useobjectivecut = FALSE
# Try to construct a feasible solution from a cover?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/trysolfromcover = FALSE
# Try to upgrade linear constraints to indicator constraints?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/upgradelinear = FALSE
# Separate using the alternative LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/sepaalternativelp = FALSE
# Force restart if absolute gap is 1 or enough binary variables have been fixed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/forcerestart = FALSE
# Decompose problem (do not generate linear constraint if all variables are continuous)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/indicator/nolinconscont = FALSE
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
constraints/integral/sepafreq = -1
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
constraints/integral/propfreq = -1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/integral/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
constraints/integral/eagerfreq = -1
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 0]
constraints/integral/maxprerounds = 0
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/integral/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/integral/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 28]
constraints/integral/presoltiming = 28
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
constraints/knapsack/sepafreq = 0
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
constraints/knapsack/propfreq = 1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/knapsack/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: 100]
constraints/knapsack/eagerfreq = 100
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
constraints/knapsack/maxprerounds = -1
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/knapsack/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/knapsack/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 28]
constraints/knapsack/presoltiming = 28
# enable linear upgrading for constraint handler <knapsack>
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/upgrade/knapsack = TRUE
# multiplier on separation frequency, how often knapsack cuts are separated (-1: never, 0: only at root)
# [type: int, advanced: TRUE, range: [-1,65534], default: 1]
constraints/knapsack/sepacardfreq = 1
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for separating knapsack cuts
# [type: real, advanced: TRUE, range: [0,1], default: 0]
constraints/knapsack/maxcardbounddist = 0
# lower clique size limit for greedy clique extraction algorithm (relative to largest clique)
# [type: real, advanced: TRUE, range: [0,1], default: 0.5]
constraints/knapsack/cliqueextractfactor = 0.5
# maximal number of separation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 5]
constraints/knapsack/maxrounds = 5
# maximal number of separation rounds per node in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
constraints/knapsack/maxroundsroot = -1
# maximal number of cuts separated per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 50]
constraints/knapsack/maxsepacuts = 50
# maximal number of cuts separated per separation round in the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 200]
constraints/knapsack/maxsepacutsroot = 200
# should disaggregation of knapsack constraints be allowed in preprocessing?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/disaggregation = TRUE
# should presolving try to simplify knapsacks
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/simplifyinequalities = TRUE
# should negated clique information be used in solving process
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/negatedclique = TRUE
# should pairwise constraint comparison be performed in presolving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/presolpairwise = TRUE
# should hash table be used for detecting redundant constraints in advance
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/presolusehashing = TRUE
# should dual presolving steps be performed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/dualpresolving = TRUE
# should GUB information be used for separation?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/knapsack/usegubs = FALSE
# should presolving try to detect constraints parallel to the objective function defining an upper bound and prevent these constraints from entering the LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/detectcutoffbound = TRUE
# should presolving try to detect constraints parallel to the objective function defining a lower bound and prevent these constraints from entering the LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/knapsack/detectlowerbound = TRUE
# should clique partition information be updated when old partition seems outdated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/knapsack/updatecliquepartitions = FALSE
# factor on the growth of global cliques to decide when to update a previous (negated) clique partition (used only if updatecliquepartitions is set to TRUE)
# [type: real, advanced: TRUE, range: [1,10], default: 1.5]
constraints/knapsack/clqpartupdatefac = 1.5
# priority of conflict handler <logicor>
# [type: int, advanced: TRUE, range: [-2147483648,2147483647], default: 800000]
conflict/logicor/priority = 800000
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
constraints/logicor/sepafreq = 0
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
constraints/logicor/propfreq = 1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/logicor/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: 100]
constraints/logicor/eagerfreq = 100
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
constraints/logicor/maxprerounds = -1
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/logicor/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/logicor/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 28]
constraints/logicor/presoltiming = 28
# enable linear upgrading for constraint handler <logicor>
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/upgrade/logicor = TRUE
# should pairwise constraint comparison be performed in presolving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/logicor/presolpairwise = TRUE
# should hash table be used for detecting redundant constraints in advance
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/logicor/presolusehashing = TRUE
# should dual presolving steps be performed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/logicor/dualpresolving = TRUE
# should negated clique information be used in presolving
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/logicor/negatedclique = TRUE
# should implications/cliques be used in presolving
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/logicor/implications = TRUE
# should pairwise constraint comparison try to strengthen constraints by removing superflous non-zeros?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/logicor/strengthen = TRUE
# priority of conflict handler <setppc>
# [type: int, advanced: TRUE, range: [-2147483648,2147483647], default: 700000]
conflict/setppc/priority = 700000
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
constraints/setppc/sepafreq = 0
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
constraints/setppc/propfreq = 1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/setppc/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: 100]
constraints/setppc/eagerfreq = 100
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
constraints/setppc/maxprerounds = -1
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/setppc/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/setppc/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 28]
constraints/setppc/presoltiming = 28
# enable linear upgrading for constraint handler <setppc>
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/upgrade/setppc = TRUE
# number of children created in pseudo branching (0: disable pseudo branching)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
constraints/setppc/npseudobranches = 2
# should pairwise constraint comparison be performed in presolving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/setppc/presolpairwise = TRUE
# should hash table be used for detecting redundant constraints in advance
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/setppc/presolusehashing = TRUE
# should dual presolving steps be performed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/setppc/dualpresolving = TRUE
# should we try to lift variables into other clique constraints, fix variables, aggregate them, and also shrink the amount of variables in clique constraints
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/setppc/cliquelifting = FALSE
# should we try to generate extra cliques out of all binary variables to maybe fasten redundant constraint detection
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/setppc/addvariablesascliques = FALSE
# should we try to shrink the number of variables in a clique constraints, by replacing more than one variable by only one
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/setppc/cliqueshrinking = TRUE
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
constraints/varbound/sepafreq = 0
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
constraints/varbound/propfreq = 1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/varbound/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: 100]
constraints/varbound/eagerfreq = 100
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
constraints/varbound/maxprerounds = -1
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/varbound/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/varbound/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 12]
constraints/varbound/presoltiming = 12
# enable linear upgrading for constraint handler <varbound>
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
constraints/linear/upgrade/varbound = TRUE
# should pairwise constraint comparison be performed in presolving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
constraints/varbound/presolpairwise = TRUE
# maximum coefficient in varbound constraint to be added as a row into LP
# [type: real, advanced: TRUE, range: [0,1e+20], default: 1000000000]
constraints/varbound/maxlpcoef = 1000000000
# should bound widening be used in conflict analysis?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
constraints/varbound/usebdwidening = TRUE
# only use improving bounds
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/bndreader/improveonly = FALSE
# should fixed and aggregated variables be printed (if not, re-parsing might fail)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reading/cipreader/writefixedvars = TRUE
# should an artificial objective, depending on the number of clauses a variable appears in, be used?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/cnfreader/useobj = FALSE
# have integer variables no upper bound by default (depending on GAMS version)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/gmsreader/freeints = FALSE
# shall characters '#', '*', '+', '/', and '-' in variable and constraint names be replaced by '_'?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/gmsreader/replaceforbiddenchars = FALSE
# default M value for big-M reformulation of indicator constraints in case no bound on slack variable is given
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 1000000]
reading/gmsreader/bigmdefault = 1000000
# which reformulation to use for indicator constraints: 'b'ig-M, 's'os1
# [type: char, advanced: FALSE, range: {bs}, default: s]
reading/gmsreader/indicatorreform = s
# is it allowed to use the gams function signpower(x,a)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/gmsreader/signpower = FALSE
# should possible "and" constraint be linearized when writing the lp file?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reading/lpreader/linearize-and-constraints = TRUE
# should an aggregated linearization for and constraints be used?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reading/lpreader/aggrlinearization-ands = TRUE
# should possible "and" constraint be linearized when writing the mps file?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reading/mpsreader/linearize-and-constraints = TRUE
# should an aggregated linearization for and constraints be used?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
reading/mpsreader/aggrlinearization-ands = TRUE
# should model constraints be subject to aging?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
reading/opbreader/dynamicconss = FALSE
# use '*' between coefficients and variables by writing to problem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
reading/opbreader/multisymbol = FALSE
# should the output format be binary(P4) (otherwise plain(P1) format)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reading/pbmreader/binary = TRUE
# maximum number of rows in the scaled picture (-1 for no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1000]
reading/pbmreader/maxrows = 1000
# maximum number of columns in the scaled picture (-1 for no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1000]
reading/pbmreader/maxcols = 1000
# should the current directory be changed to that of the ZIMPL file before parsing?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reading/zplreader/changedir = TRUE
# should ZIMPL starting solutions be forwarded to SCIP?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reading/zplreader/usestartsol = TRUE
# additional parameter string passed to the ZIMPL parser (or - for no additional parameters)
# [type: string, advanced: FALSE, default: "-"]
reading/zplreader/parameters = "-"
# priority of presolver <boundshift>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 7900000]
presolving/boundshift/priority = 7900000
# maximal number of presolving rounds the presolver participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
presolving/boundshift/maxrounds = 0
# timing mask of presolver <boundshift> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 4]
presolving/boundshift/timing = 4
# absolute value of maximum shift
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 9223372036854775807]
presolving/boundshift/maxshift = 9223372036854775807
# is flipping allowed (multiplying with -1)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
presolving/boundshift/flipping = TRUE
# shift only integer ranges?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
presolving/boundshift/integer = TRUE
# priority of presolver <implics>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -10000]
presolving/implics/priority = -10000
# maximal number of presolving rounds the presolver participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
presolving/implics/maxrounds = -1
# timing mask of presolver <implics> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 8]
presolving/implics/timing = 8
# priority of presolver <inttobinary>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 7000000]
presolving/inttobinary/priority = 7000000
# maximal number of presolving rounds the presolver participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
presolving/inttobinary/maxrounds = -1
# timing mask of presolver <inttobinary> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 4]
presolving/inttobinary/timing = 4
# priority of presolver <trivial>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 9000000]
presolving/trivial/priority = 9000000
# maximal number of presolving rounds the presolver participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
presolving/trivial/maxrounds = -1
# timing mask of presolver <trivial> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 4]
presolving/trivial/timing = 4
# priority of presolver <domcol>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1000]
presolving/domcol/priority = -1000
# maximal number of presolving rounds the presolver participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
presolving/domcol/maxrounds = -1
# timing mask of presolver <domcol> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 16]
presolving/domcol/timing = 16
# minimal number of pair comparisons
# [type: int, advanced: FALSE, range: [100,1048576], default: 1024]
presolving/domcol/numminpairs = 1024
# maximal number of pair comparisons
# [type: int, advanced: FALSE, range: [1024,1000000000], default: 1048576]
presolving/domcol/nummaxpairs = 1048576
# should predictive bound strengthening be applied?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
presolving/domcol/predbndstr = FALSE
# should reductions for continuous variables be performed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
presolving/domcol/continuousred = TRUE
# priority of presolver <convertinttobin>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 6000000]
presolving/convertinttobin/priority = 6000000
# maximal number of presolving rounds the presolver participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
presolving/convertinttobin/maxrounds = 0
# timing mask of presolver <convertinttobin> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 4]
presolving/convertinttobin/timing = 4
# absolute value of maximum domain size for converting an integer variable to binaries variables
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 9223372036854775807]
presolving/convertinttobin/maxdomainsize = 9223372036854775807
# should only integer variables with a domain size of 2^p - 1 be converted(, there we don't need an knapsack-constraint for restricting the sum of the binaries)
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
presolving/convertinttobin/onlypoweroftwo = FALSE
# should only integer variables with uplocks equals downlocks be converted
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
presolving/convertinttobin/samelocksinbothdirections = FALSE
# priority of node selection rule <bfs> in standard mode
# [type: int, advanced: FALSE, range: [-536870912,1073741823], default: 100000]
nodeselection/bfs/stdpriority = 100000
# priority of node selection rule <bfs> in memory saving mode
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 0]
nodeselection/bfs/memsavepriority = 0
# minimal plunging depth, before new best node may be selected (-1 for dynamic setting)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
nodeselection/bfs/minplungedepth = -1
# maximal plunging depth, before new best node is forced to be selected (-1 for dynamic setting)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
nodeselection/bfs/maxplungedepth = -1
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where plunging is performed
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.25]
nodeselection/bfs/maxplungequot = 0.25
# priority of node selection rule <dfs> in standard mode
# [type: int, advanced: FALSE, range: [-536870912,1073741823], default: 0]
nodeselection/dfs/stdpriority = 0
# priority of node selection rule <dfs> in memory saving mode
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 100000]
nodeselection/dfs/memsavepriority = 100000
# priority of node selection rule <estimate> in standard mode
# [type: int, advanced: FALSE, range: [-536870912,1073741823], default: 200000]
nodeselection/estimate/stdpriority = 200000
# priority of node selection rule <estimate> in memory saving mode
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 100]
nodeselection/estimate/memsavepriority = 100
# minimal plunging depth, before new best node may be selected (-1 for dynamic setting)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
nodeselection/estimate/minplungedepth = -1
# maximal plunging depth, before new best node is forced to be selected (-1 for dynamic setting)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
nodeselection/estimate/maxplungedepth = -1
# maximal quotient (estimate - lowerbound)/(cutoffbound - lowerbound) where plunging is performed
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.25]
nodeselection/estimate/maxplungequot = 0.25
# frequency at which the best node instead of the best estimate is selected (0: never)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
nodeselection/estimate/bestnodefreq = 10
# depth until breadth-first search is applied
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
nodeselection/estimate/breadthfirstdepth = -1
# number of nodes before doing plunging the first time
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
nodeselection/estimate/plungeoffset = 0
# priority of node selection rule <hybridestim> in standard mode
# [type: int, advanced: FALSE, range: [-536870912,1073741823], default: 50000]
nodeselection/hybridestim/stdpriority = 50000
# priority of node selection rule <hybridestim> in memory saving mode
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 50]
nodeselection/hybridestim/memsavepriority = 50
# minimal plunging depth, before new best node may be selected (-1 for dynamic setting)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
nodeselection/hybridestim/minplungedepth = -1
# maximal plunging depth, before new best node is forced to be selected (-1 for dynamic setting)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
nodeselection/hybridestim/maxplungedepth = -1
# maximal quotient (estimate - lowerbound)/(cutoffbound - lowerbound) where plunging is performed
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.25]
nodeselection/hybridestim/maxplungequot = 0.25
# frequency at which the best node instead of the hybrid best estimate / best bound is selected (0: never)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
nodeselection/hybridestim/bestnodefreq = 1000
# weight of estimate value in node selection score (0: pure best bound search, 1: pure best estimate search)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
nodeselection/hybridestim/estimweight = 0.1
# priority of node selection rule <restartdfs> in standard mode
# [type: int, advanced: FALSE, range: [-536870912,1073741823], default: 10000]
nodeselection/restartdfs/stdpriority = 10000
# priority of node selection rule <restartdfs> in memory saving mode
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 50000]
nodeselection/restartdfs/memsavepriority = 50000
# frequency for selecting the best node instead of the deepest one
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100]
nodeselection/restartdfs/selectbestfreq = 100
# count only leaf nodes (otherwise all nodes)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
nodeselection/restartdfs/countonlyleaves = TRUE
# priority of propagator <dualfix>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 8000000]
propagating/dualfix/priority = 8000000
# frequency for calling propagator <dualfix> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
propagating/dualfix/freq = 0
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/dualfix/delay = FALSE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 1]
propagating/dualfix/timingmask = 1
# presolving priority of propagator <dualfix>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 8000000]
propagating/dualfix/presolpriority = 8000000
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/dualfix/maxprerounds = -1
# timing mask of the presolving method of propagator <dualfix> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 4]
propagating/dualfix/presoltiming = 4
# priority of propagator <pseudoobj>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 3000000]
propagating/pseudoobj/priority = 3000000
# frequency for calling propagator <pseudoobj> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
propagating/pseudoobj/freq = 1
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/pseudoobj/delay = FALSE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 7]
propagating/pseudoobj/timingmask = 7
# presolving priority of propagator <pseudoobj>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 6000000]
propagating/pseudoobj/presolpriority = 6000000
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/pseudoobj/maxprerounds = -1
# timing mask of the presolving method of propagator <pseudoobj> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 4]
propagating/pseudoobj/presoltiming = 4
# minimal number of successive non-binary variable propagator whithout a bound reduction before aborted
# [type: int, advanced: TRUE, range: [0,2147483647], default: 100]
propagating/pseudoobj/minuseless = 100
# maximal fraction of non-binary variables with non-zero objective without a bound reduction before aborted
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
propagating/pseudoobj/maxvarsfrac = 0.1
# do we want to propagate all non-binary variables if we are propagating the root node
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/pseudoobj/propfullinroot = TRUE
# propagate new cutoff bound directly globally
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/pseudoobj/propcutoffbound = TRUE
# should the propagator be forced even if active pricer are present?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/pseudoobj/force = FALSE
# number of variable added after the propgatore is reinitialized?
# [type: int, advanced: TRUE, range: [0,2147483647], default: 1000]
propagating/pseudoobj/maxnewvars = 1000
# use implications to strengthen the propagation of binary variable (increasing the objective change)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/pseudoobj/propuseimplics = TRUE
# use implications to strengthen the resolve propagation of binary variable (increasing the objective change)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/pseudoobj/respropuseimplics = TRUE
# maximum number of binary variables the implications are used if turned on (-1: unlimited)?
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 50000]
propagating/pseudoobj/maximplvars = 50000
# priority of propagator <rootredcost>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 10000000]
propagating/rootredcost/priority = 10000000
# frequency for calling propagator <rootredcost> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
propagating/rootredcost/freq = 1
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/rootredcost/delay = FALSE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 5]
propagating/rootredcost/timingmask = 5
# presolving priority of propagator <rootredcost>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 0]
propagating/rootredcost/presolpriority = 0
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/rootredcost/maxprerounds = -1
# timing mask of the presolving method of propagator <rootredcost> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 28]
propagating/rootredcost/presoltiming = 28
# should only binary variables be propagated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/rootredcost/onlybinary = FALSE
# should the propagator be forced even if active pricer are present?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/rootredcost/force = FALSE
# priority of propagator <genvbounds>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 3000000]
propagating/genvbounds/priority = 3000000
# frequency for calling propagator <genvbounds> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
propagating/genvbounds/freq = 1
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/genvbounds/delay = FALSE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 15]
propagating/genvbounds/timingmask = 15
# presolving priority of propagator <genvbounds>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -2000000]
propagating/genvbounds/presolpriority = -2000000
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/genvbounds/maxprerounds = -1
# timing mask of the presolving method of propagator <genvbounds> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 4]
propagating/genvbounds/presoltiming = 4
# apply global propagation?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/genvbounds/global = TRUE
# apply genvbounds in root node if no new incumbent was found?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/genvbounds/propinrootnode = TRUE
# sort genvbounds and wait for bound change events?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/genvbounds/sort = TRUE
# should genvbounds be transformed to (linear) constraints?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/genvbounds/propasconss = FALSE
# priority of propagator <probing>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -100000]
propagating/probing/priority = -100000
# frequency for calling propagator <probing> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
propagating/probing/freq = -1
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/probing/delay = TRUE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 4]
propagating/probing/timingmask = 4
# presolving priority of propagator <probing>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -100000]
propagating/probing/presolpriority = -100000
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/probing/maxprerounds = -1
# timing mask of the presolving method of propagator <probing> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 16]
propagating/probing/presoltiming = 16
# maximal number of runs, probing participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1]
propagating/probing/maxruns = 1
# maximal number of propagation rounds in probing subproblems (-1: no limit, 0: auto)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
propagating/probing/proprounds = -1
# maximal number of fixings found, until probing is interrupted (0: don't iterrupt)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 25]
propagating/probing/maxfixings = 25
# maximal number of successive probings without fixings, until probing is aborted (0: don't abort)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 1000]
propagating/probing/maxuseless = 1000
# maximal number of successive probings without fixings, bound changes, and implications, until probing is aborted (0: don't abort)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 50]
propagating/probing/maxtotaluseless = 50
# maximal number of probings without fixings, until probing is aborted (0: don't abort)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
propagating/probing/maxsumuseless = 0
# maximal depth until propagation is executed(-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
propagating/probing/maxdepth = -1
# priority of propagator <redcost>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 1000000]
propagating/redcost/priority = 1000000
# frequency for calling propagator <redcost> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
propagating/redcost/freq = 1
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/redcost/delay = FALSE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 6]
propagating/redcost/timingmask = 6
# presolving priority of propagator <redcost>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 0]
propagating/redcost/presolpriority = 0
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/redcost/maxprerounds = -1
# timing mask of the presolving method of propagator <redcost> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 28]
propagating/redcost/presoltiming = 28
# should reduced cost fixing be also applied to continuous variables?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
propagating/redcost/continuous = FALSE
# should implications be used to strength the reduced cost for binary variables?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
propagating/redcost/useimplics = TRUE
# should the propagator be forced even if active pricer are present?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/redcost/force = FALSE
# priority of propagator <vbounds>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 3000000]
propagating/vbounds/priority = 3000000
# frequency for calling propagator <vbounds> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
propagating/vbounds/freq = 1
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/vbounds/delay = FALSE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 5]
propagating/vbounds/timingmask = 5
# presolving priority of propagator <vbounds>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -90000]
propagating/vbounds/presolpriority = -90000
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/vbounds/maxprerounds = -1
# timing mask of the presolving method of propagator <vbounds> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 24]
propagating/vbounds/presoltiming = 24
# should bound widening be used to initialize conflict analysis?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
propagating/vbounds/usebdwidening = TRUE
# should implications be propagated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/vbounds/useimplics = FALSE
# should cliques be propagated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/vbounds/usecliques = FALSE
# should vbounds be propagated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/vbounds/usevbounds = TRUE
# should the bounds be topologically sorted in advance?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
propagating/vbounds/dotoposort = TRUE
# should cliques be regarded for the topological sort?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/vbounds/sortcliques = FALSE
# should cycles in the variable bound graph be identified?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
propagating/vbounds/detectcycles = FALSE
# minimum percentage of new cliques to trigger another clique table analysis
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
propagating/vbounds/minnewcliques = 0.1
# maximum number of cliques per variable to run clique table analysis in medium presolving
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 50]
propagating/vbounds/maxcliquesmedium = 50
# maximum number of cliques per variable to run clique table analysis in exhaustive presolving
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 100]
propagating/vbounds/maxcliquesexhaustive = 100
# priority of propagator <obbt>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1000000]
propagating/obbt/priority = -1000000
# frequency for calling propagator <obbt> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
propagating/obbt/freq = 0
# should propagator be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/delay = TRUE
# timing when propagator should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS))
# [type: int, advanced: TRUE, range: [1,15], default: 4]
propagating/obbt/timingmask = 4
# presolving priority of propagator <obbt>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 0]
propagating/obbt/presolpriority = 0
# maximal number of presolving rounds the propagator participates in (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
propagating/obbt/maxprerounds = -1
# timing mask of the presolving method of propagator <obbt> (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [2,60], default: 28]
propagating/obbt/presoltiming = 28
# should obbt try to provide genvbounds if possible?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/creategenvbounds = TRUE
# should coefficients in filtering be normalized w.r.t. the domains sizes?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/normalize = TRUE
# try to filter bounds in so-called filter rounds by solving auxiliary LPs?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/obbt/applyfilterrounds = FALSE
# try to filter bounds with the LP solution after each solve?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/applytrivialfilter = TRUE
# should we try to generate genvbounds during trivial and aggressive filtering?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/genvbdsduringfilter = TRUE
# try to create genvbounds during separation process?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/genvbdsduringsepa = TRUE
# minimal number of filtered bounds to apply another filter round
# [type: int, advanced: TRUE, range: [1,2147483647], default: 2]
propagating/obbt/minfilter = 2
# multiple of root node LP iterations used as total LP iteration limit for obbt (<= 0: no limit )
# [type: real, advanced: FALSE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 10]
propagating/obbt/itlimitfactor = 10
# multiple of OBBT LP limit used as total LP iteration limit for solving bilinear inequality LPs (< 0 for no limit)
# [type: real, advanced: FALSE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 3]
propagating/obbt/itlimitfactorbilin = 3
# minimum absolute value of nonconvex eigenvalues for a bilinear term
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.1]
propagating/obbt/minnonconvexity = 0.1
# minimum LP iteration limit
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 5000]
propagating/obbt/minitlimit = 5000
# feasibility tolerance for reduced costs used in obbt; this value is used if SCIP's dual feastol is greater
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 1e-09]
propagating/obbt/dualfeastol = 1e-09
# maximum condition limit used in LP solver (-1.0: no limit)
# [type: real, advanced: FALSE, range: [-1,1.79769313486232e+308], default: -1]
propagating/obbt/conditionlimit = -1
# minimal relative improve for strengthening bounds
# [type: real, advanced: FALSE, range: [0,1], default: 0.001]
propagating/obbt/boundstreps = 0.001
# only apply obbt on non-convex variables
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/obbt/onlynonconvexvars = FALSE
# should integral bounds be tightened during the probing mode?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/tightintboundsprobing = TRUE
# should continuous bounds be tightened during the probing mode?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/obbt/tightcontboundsprobing = FALSE
# solve auxiliary LPs in order to find valid inequalities for bilinear terms?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
propagating/obbt/createbilinineqs = TRUE
# select the type of ordering algorithm which should be used (0: no special ordering, 1: greedy, 2: greedy reverse)
# [type: int, advanced: TRUE, range: [0,2], default: 1]
propagating/obbt/orderingalgo = 1
# should the obbt LP solution be separated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
propagating/obbt/separatesol = FALSE
# minimum number of iteration spend to separate an obbt LP solution
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
propagating/obbt/sepaminiter = 0
# maximum number of iteration spend to separate an obbt LP solution
# [type: int, advanced: TRUE, range: [0,2147483647], default: 10]
propagating/obbt/sepamaxiter = 10
# trigger a propagation round after that many bound tightenings (0: no propagation)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
propagating/obbt/propagatefreq = 0
# priority of heuristic <actconsdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1003700]
heuristics/actconsdiving/priority = -1003700
# frequency for calling primal heuristic <actconsdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/actconsdiving/freq = -1
# frequency offset for calling primal heuristic <actconsdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 5]
heuristics/actconsdiving/freqofs = 5
# maximal depth level to call primal heuristic <actconsdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/actconsdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/actconsdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/actconsdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/actconsdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/actconsdiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/actconsdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/actconsdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/actconsdiving/maxdiveubquotnosol = 1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 1]
heuristics/actconsdiving/maxdiveavgquotnosol = 1
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/actconsdiving/backtrack = TRUE
# percentage of immediate domain changes during probing to trigger LP resolve
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.15]
heuristics/actconsdiving/lpresolvedomchgquot = 0.15
# LP solve frequency for diving heuristics (0: only after enough domain changes have been found)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/actconsdiving/lpsolvefreq = 0
# should only LP branching candidates be considered instead of the slower but more general constraint handler diving variable selection?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/actconsdiving/onlylpbranchcands = TRUE
# priority of heuristic <clique>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 5000]
heuristics/clique/priority = 5000
# frequency for calling primal heuristic <clique> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/clique/freq = -1 fix
# frequency offset for calling primal heuristic <clique>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/clique/freqofs = 0
# maximal depth level to call primal heuristic <clique> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/clique/maxdepth = -1
# minimum percentage of integer variables that have to be fixable
# [type: real, advanced: FALSE, range: [0,1], default: 0.65]
heuristics/clique/minintfixingrate = 0.65
# minimum percentage of fixed variables in the sub-MIP
# [type: real, advanced: FALSE, range: [0,1], default: 0.65]
heuristics/clique/minmipfixingrate = 0.65
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 5000]
heuristics/clique/maxnodes = 5000
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 500]
heuristics/clique/nodesofs = 500
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 500]
heuristics/clique/minnodes = 500
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/clique/nodesquot = 0.1
# factor by which clique heuristic should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/clique/minimprove = 0.01
# maximum number of propagation rounds during probing (-1 infinity)
# [type: int, advanced: TRUE, range: [-1,536870911], default: 2]
heuristics/clique/maxproprounds = 2
# should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/clique/copycuts = TRUE
# should more variables be fixed based on variable locks if the fixing rate was not reached?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/clique/uselockfixings = FALSE
# maximum number of backtracks during the fixing process
# [type: int, advanced: TRUE, range: [-1,536870911], default: 10]
heuristics/clique/maxbacktracks = 10
# priority of heuristic <coefdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1001000]
heuristics/coefdiving/priority = -1001000
# frequency for calling primal heuristic <coefdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/coefdiving/freq = 10
# frequency offset for calling primal heuristic <coefdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 1]
heuristics/coefdiving/freqofs = 1
# maximal depth level to call primal heuristic <coefdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/coefdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/coefdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/coefdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/coefdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/coefdiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/coefdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/coefdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/coefdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/coefdiving/maxdiveavgquotnosol = 0
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/coefdiving/backtrack = TRUE
# percentage of immediate domain changes during probing to trigger LP resolve
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.15]
heuristics/coefdiving/lpresolvedomchgquot = 0.15
# LP solve frequency for diving heuristics (0: only after enough domain changes have been found)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/coefdiving/lpsolvefreq = 0
# should only LP branching candidates be considered instead of the slower but more general constraint handler diving variable selection?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/coefdiving/onlylpbranchcands = FALSE
# priority of heuristic <crossover>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1104000]
heuristics/crossover/priority = -1104000
# frequency for calling primal heuristic <crossover> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 30]
heuristics/crossover/freq = 30
# frequency offset for calling primal heuristic <crossover>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/crossover/freqofs = 0
# maximal depth level to call primal heuristic <crossover> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/crossover/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 500]
heuristics/crossover/nodesofs = 500
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 5000]
heuristics/crossover/maxnodes = 5000
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 50]
heuristics/crossover/minnodes = 50
# number of solutions to be taken into account
# [type: int, advanced: FALSE, range: [2,2147483647], default: 3]
heuristics/crossover/nusedsols = 3
# number of nodes without incumbent change that heuristic should wait
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 200]
heuristics/crossover/nwaitingnodes = 200
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/crossover/nodesquot = 0.1
# minimum percentage of integer variables that have to be fixed
# [type: real, advanced: FALSE, range: [0,1], default: 0.666]
heuristics/crossover/minfixingrate = 0.666
# factor by which Crossover should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/crossover/minimprove = 0.01
# factor by which the limit on the number of LP depends on the node limit
# [type: real, advanced: TRUE, range: [1,1.79769313486232e+308], default: 2]
heuristics/crossover/lplimfac = 2
# should the choice which sols to take be randomized?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/crossover/randomization = TRUE
# should the nwaitingnodes parameter be ignored at the root node?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/crossover/dontwaitatroot = FALSE
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/crossover/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/crossover/copycuts = TRUE
# should the subproblem be permuted to increase diversification?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/crossover/permute = FALSE
# limit on number of improving incumbent solutions in sub-CIP
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
heuristics/crossover/bestsollimit = -1
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/crossover/useuct = FALSE
# priority of heuristic <dins>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1105000]
heuristics/dins/priority = -1105000
# frequency for calling primal heuristic <dins> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/dins/freq = -1
# frequency offset for calling primal heuristic <dins>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/dins/freqofs = 0
# maximal depth level to call primal heuristic <dins> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/dins/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 5000]
heuristics/dins/nodesofs = 5000
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.05]
heuristics/dins/nodesquot = 0.05
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 50]
heuristics/dins/minnodes = 50
# number of pool-solutions to be checked for flag array update (for hard fixing of binary variables)
# [type: int, advanced: FALSE, range: [1,2147483647], default: 5]
heuristics/dins/solnum = 5
# radius (using Manhattan metric) of the incumbent's neighborhood to be searched
# [type: int, advanced: FALSE, range: [1,2147483647], default: 18]
heuristics/dins/neighborhoodsize = 18
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 5000]
heuristics/dins/maxnodes = 5000
# factor by which dins should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/dins/minimprove = 0.01
# number of nodes without incumbent change that heuristic should wait
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 200]
heuristics/dins/nwaitingnodes = 200
# factor by which the limit on the number of LP depends on the node limit
# [type: real, advanced: TRUE, range: [1,1.79769313486232e+308], default: 1.5]
heuristics/dins/lplimfac = 1.5
# minimum percentage of integer variables that have to be fixable
# [type: real, advanced: FALSE, range: [0,1], default: 0.3]
heuristics/dins/minfixingrate = 0.3
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/dins/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/dins/copycuts = TRUE
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/dins/useuct = FALSE
# limit on number of improving incumbent solutions in sub-CIP
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 3]
heuristics/dins/bestsollimit = 3
# priority of heuristic <dualval>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 0]
heuristics/dualval/priority = 0
# frequency for calling primal heuristic <dualval> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/dualval/freq = -1
# frequency offset for calling primal heuristic <dualval>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/dualval/freqofs = 0
# maximal depth level to call primal heuristic <dualval> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/dualval/maxdepth = -1
# exit if objective doesn't improve
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/dualval/forceimprovements = FALSE
# add constraint to ensure that discrete vars are improving
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/dualval/onlycheaper = TRUE
# disable the heuristic if it was not called at a leaf of the B&B tree
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/dualval/onlyleaves = FALSE
# relax the indicator variables by introducing continuous copies
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/dualval/relaxindicators = FALSE
# relax the continous variables
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/dualval/relaxcontvars = FALSE
# verblevel of the heuristic, default is 0 to display nothing
# [type: int, advanced: FALSE, range: [0,4], default: 0]
heuristics/dualval/heurverblevel = 0
# verblevel of the nlp solver, can be 0 or 1
# [type: int, advanced: FALSE, range: [0,1], default: 0]
heuristics/dualval/nlpverblevel = 0
# number of ranks that should be displayed when the heuristic is called
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
heuristics/dualval/rankvalue = 10
# maximal number of recursive calls of the heuristic (if dynamicdepth is off)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 25]
heuristics/dualval/maxcalls = 25
# says if and how the recursion depth is computed at runtime
# [type: int, advanced: FALSE, range: [0,1], default: 0]
heuristics/dualval/dynamicdepth = 0
# maximal number of variables that may have maximal rank, quit if there are more, turn off by setting -1
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 50]
heuristics/dualval/maxequalranks = 50
# minimal gap for which we still run the heuristic, if gap is less we return without doing anything
# [type: real, advanced: FALSE, range: [0,100], default: 5]
heuristics/dualval/mingap = 5
# value added to objective of slack variables, must not be zero
# [type: real, advanced: FALSE, range: [0.1,1e+20], default: 1]
heuristics/dualval/lambdaslack = 1
# scaling factor for the objective function
# [type: real, advanced: FALSE, range: [0,1], default: 0]
heuristics/dualval/lambdaobj = 0
# priority of heuristic <feaspump>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1000000]
heuristics/feaspump/priority = -1000000
# frequency for calling primal heuristic <feaspump> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 20]
heuristics/feaspump/freq = 20
# frequency offset for calling primal heuristic <feaspump>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/feaspump/freqofs = 0
# maximal depth level to call primal heuristic <feaspump> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/feaspump/maxdepth = -1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.01]
heuristics/feaspump/maxlpiterquot = 0.01
# factor by which the regard of the objective is decreased in each round, 1.0 for dynamic
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/feaspump/objfactor = 0.1
# initial weight of the objective function in the convex combination
# [type: real, advanced: FALSE, range: [0,1], default: 1]
heuristics/feaspump/alpha = 1
# threshold difference for the convex parameter to perform perturbation
# [type: real, advanced: FALSE, range: [0,1], default: 1]
heuristics/feaspump/alphadiff = 1
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/feaspump/maxlpiterofs = 1000
# total number of feasible solutions found up to which heuristic is called (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
heuristics/feaspump/maxsols = 10
# maximal number of pumping loops (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10000]
heuristics/feaspump/maxloops = 10000
# maximal number of pumping rounds without fractionality improvement (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
heuristics/feaspump/maxstallloops = 10
# minimum number of random variables to flip, if a 1-cycle is encountered
# [type: int, advanced: TRUE, range: [1,2147483647], default: 10]
heuristics/feaspump/minflips = 10
# maximum length of cycles to be checked explicitly in each round
# [type: int, advanced: TRUE, range: [1,100], default: 3]
heuristics/feaspump/cyclelength = 3
# number of iterations until a random perturbation is forced
# [type: int, advanced: TRUE, range: [1,2147483647], default: 100]
heuristics/feaspump/perturbfreq = 100
# radius (using Manhattan metric) of the neighborhood to be searched in stage 3
# [type: int, advanced: FALSE, range: [1,2147483647], default: 18]
heuristics/feaspump/neighborhoodsize = 18
# should the feasibility pump be called at root node before cut separation?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/feaspump/beforecuts = TRUE
# should an iterative round-and-propagate scheme be used to find the integral points?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/feaspump/usefp20 = FALSE
# should a random perturbation be performed if a feasible solution was found?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/feaspump/pertsolfound = TRUE
# should we solve a local branching sub-MIP if no solution could be found?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/feaspump/stage3 = FALSE
# should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/feaspump/copycuts = TRUE
# priority of heuristic <fixandinfer>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -500000]
heuristics/fixandinfer/priority = -500000
# frequency for calling primal heuristic <fixandinfer> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/fixandinfer/freq = -1
# frequency offset for calling primal heuristic <fixandinfer>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/fixandinfer/freqofs = 0
# maximal depth level to call primal heuristic <fixandinfer> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/fixandinfer/maxdepth = -1
# maximal number of propagation rounds in probing subproblems (-1: no limit, 0: auto)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 0]
heuristics/fixandinfer/proprounds = 0
# minimal number of fixings to apply before dive may be aborted
# [type: int, advanced: TRUE, range: [0,2147483647], default: 100]
heuristics/fixandinfer/minfixings = 100
# priority of heuristic <fracdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1003000]
heuristics/fracdiving/priority = -1003000
# frequency for calling primal heuristic <fracdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/fracdiving/freq = 10
# frequency offset for calling primal heuristic <fracdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 3]
heuristics/fracdiving/freqofs = 3
# maximal depth level to call primal heuristic <fracdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/fracdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/fracdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/fracdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/fracdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/fracdiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/fracdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/fracdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/fracdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/fracdiving/maxdiveavgquotnosol = 0
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/fracdiving/backtrack = TRUE
# percentage of immediate domain changes during probing to trigger LP resolve
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.15]
heuristics/fracdiving/lpresolvedomchgquot = 0.15
# LP solve frequency for diving heuristics (0: only after enough domain changes have been found)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/fracdiving/lpsolvefreq = 0
# should only LP branching candidates be considered instead of the slower but more general constraint handler diving variable selection?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/fracdiving/onlylpbranchcands = FALSE
# priority of heuristic <guideddiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1007000]
heuristics/guideddiving/priority = -1007000
# frequency for calling primal heuristic <guideddiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/guideddiving/freq = 10
# frequency offset for calling primal heuristic <guideddiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 7]
heuristics/guideddiving/freqofs = 7
# maximal depth level to call primal heuristic <guideddiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/guideddiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/guideddiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/guideddiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/guideddiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/guideddiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/guideddiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/guideddiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/guideddiving/maxdiveubquotnosol = 1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 1]
heuristics/guideddiving/maxdiveavgquotnosol = 1
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/guideddiving/backtrack = TRUE
# percentage of immediate domain changes during probing to trigger LP resolve
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.15]
heuristics/guideddiving/lpresolvedomchgquot = 0.15
# LP solve frequency for diving heuristics (0: only after enough domain changes have been found)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/guideddiving/lpsolvefreq = 0
# should only LP branching candidates be considered instead of the slower but more general constraint handler diving variable selection?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/guideddiving/onlylpbranchcands = FALSE
# priority of heuristic <intdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1003500]
heuristics/intdiving/priority = -1003500
# frequency for calling primal heuristic <intdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/intdiving/freq = -1
# frequency offset for calling primal heuristic <intdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 9]
heuristics/intdiving/freqofs = 9
# maximal depth level to call primal heuristic <intdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/intdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/intdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/intdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/intdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/intdiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/intdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/intdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/intdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/intdiving/maxdiveavgquotnosol = 0
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/intdiving/backtrack = TRUE
# priority of heuristic <intshifting>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -10000]
heuristics/intshifting/priority = -10000
# frequency for calling primal heuristic <intshifting> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/intshifting/freq = 10
# frequency offset for calling primal heuristic <intshifting>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/intshifting/freqofs = 0
# maximal depth level to call primal heuristic <intshifting> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/intshifting/maxdepth = -1
# priority of heuristic <linesearchdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1006000]
heuristics/linesearchdiving/priority = -1006000
# frequency for calling primal heuristic <linesearchdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/linesearchdiving/freq = 10
# frequency offset for calling primal heuristic <linesearchdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 6]
heuristics/linesearchdiving/freqofs = 6
# maximal depth level to call primal heuristic <linesearchdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/linesearchdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/linesearchdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/linesearchdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/linesearchdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/linesearchdiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/linesearchdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/linesearchdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/linesearchdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/linesearchdiving/maxdiveavgquotnosol = 0
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/linesearchdiving/backtrack = TRUE
# percentage of immediate domain changes during probing to trigger LP resolve
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.15]
heuristics/linesearchdiving/lpresolvedomchgquot = 0.15
# LP solve frequency for diving heuristics (0: only after enough domain changes have been found)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/linesearchdiving/lpsolvefreq = 0
# should only LP branching candidates be considered instead of the slower but more general constraint handler diving variable selection?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/linesearchdiving/onlylpbranchcands = FALSE
# priority of heuristic <localbranching>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1102000]
heuristics/localbranching/priority = -1102000
# frequency for calling primal heuristic <localbranching> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/localbranching/freq = -1
# frequency offset for calling primal heuristic <localbranching>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/localbranching/freqofs = 0
# maximal depth level to call primal heuristic <localbranching> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/localbranching/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/localbranching/nodesofs = 1000
# radius (using Manhattan metric) of the incumbent's neighborhood to be searched
# [type: int, advanced: FALSE, range: [1,2147483647], default: 18]
heuristics/localbranching/neighborhoodsize = 18
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.05]
heuristics/localbranching/nodesquot = 0.05
# factor by which the limit on the number of LP depends on the node limit
# [type: real, advanced: TRUE, range: [1,1.79769313486232e+308], default: 1.5]
heuristics/localbranching/lplimfac = 1.5
# minimum number of nodes required to start the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 1000]
heuristics/localbranching/minnodes = 1000
# maximum number of nodes to regard in the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 10000]
heuristics/localbranching/maxnodes = 10000
# number of nodes without incumbent change that heuristic should wait
# [type: int, advanced: TRUE, range: [0,2147483647], default: 200]
heuristics/localbranching/nwaitingnodes = 200
# factor by which localbranching should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/localbranching/minimprove = 0.01
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/localbranching/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/localbranching/copycuts = TRUE
# limit on number of improving incumbent solutions in sub-CIP
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 3]
heuristics/localbranching/bestsollimit = 3
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/localbranching/useuct = FALSE
# priority of heuristic <mutation>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1103000]
heuristics/mutation/priority = -1103000
# frequency for calling primal heuristic <mutation> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/mutation/freq = -1
# frequency offset for calling primal heuristic <mutation>
# [type: int, advanced: FALSE, range: [0,65534], default: 8]
heuristics/mutation/freqofs = 8
# maximal depth level to call primal heuristic <mutation> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/mutation/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: int, advanced: FALSE, range: [0,2147483647], default: 500]
heuristics/mutation/nodesofs = 500
# maximum number of nodes to regard in the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 5000]
heuristics/mutation/maxnodes = 5000
# minimum number of nodes required to start the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 500]
heuristics/mutation/minnodes = 500
# number of nodes without incumbent change that heuristic should wait
# [type: int, advanced: TRUE, range: [0,2147483647], default: 200]
heuristics/mutation/nwaitingnodes = 200
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/mutation/nodesquot = 0.1
# percentage of integer variables that have to be fixed
# [type: real, advanced: FALSE, range: [1e-06,0.999999], default: 0.8]
heuristics/mutation/minfixingrate = 0.8
# factor by which mutation should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/mutation/minimprove = 0.01
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/mutation/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/mutation/copycuts = TRUE
# limit on number of improving incumbent solutions in sub-CIP
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
heuristics/mutation/bestsollimit = -1
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/mutation/useuct = FALSE
# priority of heuristic <nlpdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1003000]
heuristics/nlpdiving/priority = -1003000
# frequency for calling primal heuristic <nlpdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/nlpdiving/freq = 10
# frequency offset for calling primal heuristic <nlpdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 3]
heuristics/nlpdiving/freqofs = 3
# maximal depth level to call primal heuristic <nlpdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/nlpdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/nlpdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/nlpdiving/maxreldepth = 1
# minimial absolute number of allowed NLP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 200]
heuristics/nlpdiving/maxnlpiterabs = 200
# additional allowed number of NLP iterations relative to successfully found solutions
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
heuristics/nlpdiving/maxnlpiterrel = 10
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/nlpdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/nlpdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/nlpdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/nlpdiving/maxdiveavgquotnosol = 0
# maximal number of NLPs with feasible solution to solve during one dive
# [type: int, advanced: FALSE, range: [1,2147483647], default: 10]
heuristics/nlpdiving/maxfeasnlps = 10
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/nlpdiving/backtrack = TRUE
# should the LP relaxation be solved before the NLP relaxation?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/nlpdiving/lp = FALSE
# prefer variables that are also fractional in LP solution?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/nlpdiving/preferlpfracs = FALSE
# heuristic will not run if less then this percentage of calls succeeded (0.0: no limit)
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/nlpdiving/minsuccquot = 0.1
# percentage of fractional variables that should be fixed before the next NLP solve
# [type: real, advanced: FALSE, range: [0,1], default: 0.2]
heuristics/nlpdiving/fixquot = 0.2
# should variables in a minimal cover be preferred?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/nlpdiving/prefercover = TRUE
# should a sub-MIP be solved if all cover variables are fixed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/nlpdiving/solvesubmip = FALSE
# should the NLP solver stop early if it converges slow?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/nlpdiving/nlpfastfail = TRUE
# which point should be used as starting point for the NLP solver? ('n'one, last 'f'easible, from dive's'tart)
# [type: char, advanced: TRUE, range: {fns}, default: s]
heuristics/nlpdiving/nlpstart = s
# which variable selection should be used? ('f'ractionality, 'c'oefficient, 'p'seudocost, 'g'uided, 'd'ouble, 'v'eclen)
# [type: char, advanced: FALSE, range: {fcpgdv}, default: d]
heuristics/nlpdiving/varselrule = d
# priority of heuristic <objpscostdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1004000]
heuristics/objpscostdiving/priority = -1004000
# frequency for calling primal heuristic <objpscostdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 20]
heuristics/objpscostdiving/freq = 20
# frequency offset for calling primal heuristic <objpscostdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 4]
heuristics/objpscostdiving/freqofs = 4
# maximal depth level to call primal heuristic <objpscostdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/objpscostdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/objpscostdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/objpscostdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to total iteration number
# [type: real, advanced: FALSE, range: [0,1], default: 0.01]
heuristics/objpscostdiving/maxlpiterquot = 0.01
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/objpscostdiving/maxlpiterofs = 1000
# total number of feasible solutions found up to which heuristic is called (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
heuristics/objpscostdiving/maxsols = -1
# maximal diving depth: number of binary/integer variables times depthfac
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.5]
heuristics/objpscostdiving/depthfac = 0.5
# maximal diving depth factor if no feasible solution was found yet
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 2]
heuristics/objpscostdiving/depthfacnosol = 2
# priority of heuristic <octane>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1008000]
heuristics/octane/priority = -1008000
# frequency for calling primal heuristic <octane> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/octane/freq = -1
# frequency offset for calling primal heuristic <octane>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/octane/freqofs = 0
# maximal depth level to call primal heuristic <octane> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/octane/maxdepth = -1
# number of 0-1-points to be tested as possible solutions by OCTANE
# [type: int, advanced: TRUE, range: [1,2147483647], default: 100]
heuristics/octane/fmax = 100
# number of 0-1-points to be tested at first whether they violate a common row
# [type: int, advanced: TRUE, range: [1,2147483647], default: 10]
heuristics/octane/ffirst = 10
# execute OCTANE only in the space of fractional variables (TRUE) or in the full space?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/octane/usefracspace = TRUE
# should the inner normal of the objective be used as one ray direction?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/octane/useobjray = TRUE
# should the average of the basic cone be used as one ray direction?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/octane/useavgray = TRUE
# should the difference between the root solution and the current LP solution be used as one ray direction?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/octane/usediffray = FALSE
# should the weighted average of the basic cone be used as one ray direction?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/octane/useavgwgtray = TRUE
# should the weighted average of the nonbasic cone be used as one ray direction?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/octane/useavgnbray = TRUE
# priority of heuristic <oneopt>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -20000]
heuristics/oneopt/priority = -20000
# frequency for calling primal heuristic <oneopt> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/oneopt/freq = 1
# frequency offset for calling primal heuristic <oneopt>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/oneopt/freqofs = 0
# maximal depth level to call primal heuristic <oneopt> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/oneopt/maxdepth = -1
# should the objective be weighted with the potential shifting value when sorting the shifting candidates?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/oneopt/weightedobj = TRUE
# should the heuristic be called before and during the root node?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/oneopt/duringroot = TRUE
# should the construction of the LP be forced even if LP solving is deactivated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/oneopt/forcelpconstruction = FALSE
# should the heuristic be called before presolving?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/oneopt/beforepresol = FALSE
# should the heuristic continue to run as long as improvements are found?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/oneopt/useloop = TRUE
# priority of heuristic <proximity>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -2000000]
heuristics/proximity/priority = -2000000
# frequency for calling primal heuristic <proximity> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/proximity/freq = -1
# frequency offset for calling primal heuristic <proximity>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/proximity/freqofs = 0
# maximal depth level to call primal heuristic <proximity> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/proximity/maxdepth = -1
# should subproblem be constructed based on LP row information?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/proximity/uselprows = FALSE
# should the heuristic immediately run again on its newly found solution?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/proximity/restart = TRUE
# should the heuristic solve a final LP in case of continuous objective variables?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/proximity/usefinallp = FALSE
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 10000]
heuristics/proximity/maxnodes = 10000
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 50]
heuristics/proximity/nodesofs = 50
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 1]
heuristics/proximity/minnodes = 1
# maximum number of LP iterations to be performed in the subproblem
# [type: longint, advanced: TRUE, range: [-1,9223372036854775807], default: 100000]
heuristics/proximity/maxlpiters = 100000
# minimum number of LP iterations performed in subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 200]
heuristics/proximity/minlpiters = 200
# waiting nodes since last incumbent before heuristic is executed
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 100]
heuristics/proximity/waitingnodes = 100
# factor by which proximity should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.02]
heuristics/proximity/minimprove = 0.02
# sub-MIP node limit w.r.t number of original nodes
# [type: real, advanced: TRUE, range: [0,1e+20], default: 0.1]
heuristics/proximity/nodesquot = 0.1
# threshold for percentage of binary variables required to start
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/proximity/binvarquot = 0.1
# quotient of sub-MIP LP iterations with respect to LP iterations so far
# [type: real, advanced: TRUE, range: [0,1], default: 0.2]
heuristics/proximity/lpitersquot = 0.2
# minimum primal-dual gap for which the heuristic is executed
# [type: real, advanced: TRUE, range: [0,1e+20], default: 0.01]
heuristics/proximity/mingap = 0.01
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/proximity/useuct = FALSE
# priority of heuristic <pscostdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1002000]
heuristics/pscostdiving/priority = -1002000
# frequency for calling primal heuristic <pscostdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/pscostdiving/freq = 10
# frequency offset for calling primal heuristic <pscostdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 2]
heuristics/pscostdiving/freqofs = 2
# maximal depth level to call primal heuristic <pscostdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/pscostdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/pscostdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/pscostdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/pscostdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/pscostdiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/pscostdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/pscostdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/pscostdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/pscostdiving/maxdiveavgquotnosol = 0
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/pscostdiving/backtrack = TRUE
# percentage of immediate domain changes during probing to trigger LP resolve
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.15]
heuristics/pscostdiving/lpresolvedomchgquot = 0.15
# LP solve frequency for diving heuristics (0: only after enough domain changes have been found)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/pscostdiving/lpsolvefreq = 0
# should only LP branching candidates be considered instead of the slower but more general constraint handler diving variable selection?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/pscostdiving/onlylpbranchcands = TRUE
# priority of heuristic <randrounding>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -200]
heuristics/randrounding/priority = -200
# frequency for calling primal heuristic <randrounding> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 20]
heuristics/randrounding/freq = 20
# frequency offset for calling primal heuristic <randrounding>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/randrounding/freqofs = 0
# maximal depth level to call primal heuristic <randrounding> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/randrounding/maxdepth = -1
# should the heuristic only be called once per node?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/randrounding/oncepernode = FALSE
# should the heuristic apply the variable lock strategy of simple rounding, if possible?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/randrounding/usesimplerounding = FALSE
# should the probing part of the heuristic be applied exclusively at the root node?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/randrounding/propagateonlyroot = TRUE
# limit of rounds for each propagation call
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 1]
heuristics/randrounding/maxproprounds = 1
# priority of heuristic <rens>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1100000]
heuristics/rens/priority = -1100000
# frequency for calling primal heuristic <rens> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/rens/freq = 0
# frequency offset for calling primal heuristic <rens>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/rens/freqofs = 0
# maximal depth level to call primal heuristic <rens> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/rens/maxdepth = -1
# minimum percentage of integer variables that have to be fixable
# [type: real, advanced: FALSE, range: [0,1], default: 0.5]
heuristics/rens/minfixingrate = 0.5
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 5000]
heuristics/rens/maxnodes = 5000
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 500]
heuristics/rens/nodesofs = 500
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 50]
heuristics/rens/minnodes = 50
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/rens/nodesquot = 0.1
# factor by which RENS should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/rens/minimprove = 0.01
# factor by which the limit on the number of LP depends on the node limit
# [type: real, advanced: TRUE, range: [1,1.79769313486232e+308], default: 2]
heuristics/rens/lplimfac = 2
# solution that is used for fixing values ('l'p relaxation, 'n'lp relaxation)
# [type: char, advanced: FALSE, range: {nl}, default: l]
heuristics/rens/startsol = l
# should general integers get binary bounds [floor(.),ceil(.)] ?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/rens/binarybounds = TRUE
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rens/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/rens/copycuts = TRUE
# should the RENS sub-CIP get its own full time limit? This is only for tesing and not recommended!
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rens/extratime = FALSE
# should all subproblem solutions be added to the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rens/addallsols = FALSE
# should the RENS sub-CIP be solved with cuts, conflicts, strong branching,... This is only for tesing and not recommended!
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rens/fullscale = FALSE
# limit on number of improving incumbent solutions in sub-CIP
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
heuristics/rens/bestsollimit = -1
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rens/useuct = FALSE
# priority of heuristic <rins>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1101000]
heuristics/rins/priority = -1101000
# frequency for calling primal heuristic <rins> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 25]
heuristics/rins/freq = 25
# frequency offset for calling primal heuristic <rins>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/rins/freqofs = 0
# maximal depth level to call primal heuristic <rins> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/rins/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: int, advanced: FALSE, range: [0,2147483647], default: 500]
heuristics/rins/nodesofs = 500
# maximum number of nodes to regard in the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 5000]
heuristics/rins/maxnodes = 5000
# minimum number of nodes required to start the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 50]
heuristics/rins/minnodes = 50
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/rins/nodesquot = 0.1
# number of nodes without incumbent change that heuristic should wait
# [type: int, advanced: TRUE, range: [0,2147483647], default: 200]
heuristics/rins/nwaitingnodes = 200
# factor by which rins should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/rins/minimprove = 0.01
# minimum percentage of integer variables that have to be fixed
# [type: real, advanced: FALSE, range: [0,1], default: 0.3]
heuristics/rins/minfixingrate = 0.3
# factor by which the limit on the number of LP depends on the node limit
# [type: real, advanced: TRUE, range: [1,1.79769313486232e+308], default: 2]
heuristics/rins/lplimfac = 2
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rins/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/rins/copycuts = TRUE
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rins/useuct = FALSE
# priority of heuristic <rootsoldiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1005000]
heuristics/rootsoldiving/priority = -1005000
# frequency for calling primal heuristic <rootsoldiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 20]
heuristics/rootsoldiving/freq = 20
# frequency offset for calling primal heuristic <rootsoldiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 5]
heuristics/rootsoldiving/freqofs = 5
# maximal depth level to call primal heuristic <rootsoldiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/rootsoldiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/rootsoldiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/rootsoldiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.01]
heuristics/rootsoldiving/maxlpiterquot = 0.01
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/rootsoldiving/maxlpiterofs = 1000
# total number of feasible solutions found up to which heuristic is called (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
heuristics/rootsoldiving/maxsols = -1
# maximal diving depth: number of binary/integer variables times depthfac
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.5]
heuristics/rootsoldiving/depthfac = 0.5
# maximal diving depth factor if no feasible solution was found yet
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 2]
heuristics/rootsoldiving/depthfacnosol = 2
# soft rounding factor to fade out objective coefficients
# [type: real, advanced: TRUE, range: [0,1], default: 0.9]
heuristics/rootsoldiving/alpha = 0.9
# priority of heuristic <rounding>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1000]
heuristics/rounding/priority = -1000
# frequency for calling primal heuristic <rounding> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/rounding/freq = 1
# frequency offset for calling primal heuristic <rounding>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/rounding/freqofs = 0
# maximal depth level to call primal heuristic <rounding> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/rounding/maxdepth = -1
# number of calls per found solution that are considered as standard success, a higher factor causes the heuristic to be called more often
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 100]
heuristics/rounding/successfactor = 100
# should the heuristic only be called once per node?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/rounding/oncepernode = FALSE
# priority of heuristic <shiftandpropagate>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 1000]
heuristics/shiftandpropagate/priority = 1000
# frequency for calling primal heuristic <shiftandpropagate> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/shiftandpropagate/freq = 0
# frequency offset for calling primal heuristic <shiftandpropagate>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/shiftandpropagate/freqofs = 0
# maximal depth level to call primal heuristic <shiftandpropagate> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/shiftandpropagate/maxdepth = -1
# The number of propagation rounds used for each propagation
# [type: int, advanced: TRUE, range: [-1,1000], default: 10]
heuristics/shiftandpropagate/nproprounds = 10
# Should continuous variables be relaxed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/relax = TRUE
# Should domains be reduced by probing?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/probing = TRUE
# Should heuristic only be executed if no primal solution was found, yet?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/onlywithoutsol = TRUE
# The number of cutoffs before heuristic stops
# [type: int, advanced: TRUE, range: [-1,1000000], default: 15]
heuristics/shiftandpropagate/cutoffbreaker = 15
# the key for variable sorting: (n)orms down, norms (u)p, (v)iolations down, viola(t)ions up, or (r)andom
# [type: char, advanced: TRUE, range: {nrtuv}, default: v]
heuristics/shiftandpropagate/sortkey = v
# Should variables be sorted for the heuristic?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/sortvars = TRUE
# should variable statistics be collected during probing?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/collectstats = TRUE
# Should the heuristic stop calculating optimal shift values when no more rows are violated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/stopafterfeasible = TRUE
# Should binary variables be shifted first?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/preferbinaries = TRUE
# should variables with a zero shifting value be delayed instead of being fixed?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/shiftandpropagate/nozerofixing = FALSE
# should binary variables with no locks in one direction be fixed to that direction?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/fixbinlocks = TRUE
# should binary variables with no locks be preferred in the ordering?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/shiftandpropagate/binlocksfirst = FALSE
# should coefficients and left/right hand sides be normalized by max row coeff?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/normalize = TRUE
# should row weight be increased every time the row is violated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/shiftandpropagate/updateweights = FALSE
# should implicit integer variables be treated as continuous variables?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/shiftandpropagate/impliscontinuous = TRUE
# should the heuristic choose the best candidate in every round? (set to FALSE for static order)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/shiftandpropagate/selectbest = FALSE
# maximum percentage of allowed cutoffs before stopping the heuristic
# [type: real, advanced: TRUE, range: [0,2], default: 0]
heuristics/shiftandpropagate/maxcutoffquot = 0
# priority of heuristic <shifting>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -5000]
heuristics/shifting/priority = -5000
# frequency for calling primal heuristic <shifting> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/shifting/freq = 10
# frequency offset for calling primal heuristic <shifting>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/shifting/freqofs = 0
# maximal depth level to call primal heuristic <shifting> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/shifting/maxdepth = -1
# priority of heuristic <subnlp>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -2000000]
heuristics/subnlp/priority = -2000000
# frequency for calling primal heuristic <subnlp> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/subnlp/freq = 1
# frequency offset for calling primal heuristic <subnlp>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/subnlp/freqofs = 0
# maximal depth level to call primal heuristic <subnlp> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/subnlp/maxdepth = -1
# verbosity level of NLP solver
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/subnlp/nlpverblevel = 0
# iteration limit of NLP solver; 0 to use solver default
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/subnlp/nlpiterlimit = 0
# time limit of NLP solver; 0 to use solver default
# [type: real, advanced: FALSE, range: [0,1e+20], default: 0]
heuristics/subnlp/nlptimelimit = 0
# name of an NLP solver specific options file
# [type: string, advanced: TRUE, default: ""]
heuristics/subnlp/nlpoptfile = ""
# if SCIP does not accept a NLP feasible solution, resolve NLP with feas. tolerance reduced by this factor (set to 1.0 to turn off resolve)
# [type: real, advanced: TRUE, range: [0,1], default: 0.001]
heuristics/subnlp/resolvetolfactor = 0.001
# should the NLP resolve be started from the original starting point or the infeasible solution?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/subnlp/resolvefromscratch = TRUE
# number of iterations added to the contingent of the total number of iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 500]
heuristics/subnlp/iteroffset = 500
# contingent of NLP iterations in relation to the number of nodes in SCIP
# [type: real, advanced: FALSE, range: [0,1e+20], default: 0.1]
heuristics/subnlp/iterquotient = 0.1
# contingent of NLP iterations in relation to the number of nodes in SCIP
# [type: int, advanced: FALSE, range: [0,2147483647], default: 300]
heuristics/subnlp/itermin = 300
# whether to run NLP heuristic always if starting point available (does not use iteroffset,iterquot,itermin)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/subnlp/runalways = FALSE
# factor by which NLP heuristic should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/subnlp/minimprove = 0.01
# limit on number of presolve rounds in sub-SCIP (-1 for unlimited, 0 for no presolve)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
heuristics/subnlp/maxpresolverounds = -1
# whether to add constraints that forbid specific fixings that turned out to be infeasible
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/subnlp/forbidfixings = TRUE
# whether to keep SCIP copy or to create new copy each time heuristic is applied
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/subnlp/keepcopy = TRUE
# priority of heuristic <trivial>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 10000]
heuristics/trivial/priority = 10000
# frequency for calling primal heuristic <trivial> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/trivial/freq = 0
# frequency offset for calling primal heuristic <trivial>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/trivial/freqofs = 0
# maximal depth level to call primal heuristic <trivial> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/trivial/maxdepth = -1
# priority of heuristic <trysol>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -3000000]
heuristics/trysol/priority = -3000000
# frequency for calling primal heuristic <trysol> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/trysol/freq = 1
# frequency offset for calling primal heuristic <trysol>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/trysol/freqofs = 0
# maximal depth level to call primal heuristic <trysol> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/trysol/maxdepth = -1
# priority of heuristic <twoopt>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -20100]
heuristics/twoopt/priority = -20100
# frequency for calling primal heuristic <twoopt> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/twoopt/freq = -1
# frequency offset for calling primal heuristic <twoopt>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/twoopt/freqofs = 0
# maximal depth level to call primal heuristic <twoopt> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/twoopt/maxdepth = -1
# Should Integer-2-Optimization be applied or not?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/twoopt/intopt = FALSE
# user parameter to determine number of nodes to wait after last best solution before calling heuristic
# [type: int, advanced: TRUE, range: [0,10000], default: 0]
heuristics/twoopt/waitingnodes = 0
# maximum number of slaves for one master variable
# [type: int, advanced: TRUE, range: [-1,1000000], default: 199]
heuristics/twoopt/maxnslaves = 199
# parameter to determine the percentage of rows two variables have to share before they are considered equal
# [type: real, advanced: TRUE, range: [0,1], default: 0.5]
heuristics/twoopt/matchingrate = 0.5
# priority of heuristic <undercover>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1110000]
heuristics/undercover/priority = -1110000
# frequency for calling primal heuristic <undercover> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/undercover/freq = 0
# frequency offset for calling primal heuristic <undercover>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/undercover/freqofs = 0
# maximal depth level to call primal heuristic <undercover> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/undercover/maxdepth = -1
# prioritized sequence of fixing values used ('l'p relaxation, 'n'lp relaxation, 'i'ncumbent solution)
# [type: string, advanced: FALSE, default: "li"]
heuristics/undercover/fixingalts = "li"
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 500]
heuristics/undercover/maxnodes = 500
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 500]
heuristics/undercover/minnodes = 500
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 500]
heuristics/undercover/nodesofs = 500
# weight for conflict score in fixing order
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 1000]
heuristics/undercover/conflictweight = 1000
# weight for cutoff score in fixing order
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 1]
heuristics/undercover/cutoffweight = 1
# weight for inference score in fixing order
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 1]
heuristics/undercover/inferenceweight = 1
# maximum coversize (as fraction of total number of variables)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/undercover/maxcoversizevars = 1
# maximum coversize maximum coversize (as ratio to the percentage of non-affected constraints)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 1.79769313486232e+308]
heuristics/undercover/maxcoversizeconss = 1.79769313486232e+308
# minimum percentage of nonlinear constraints in the original problem
# [type: real, advanced: TRUE, range: [0,1], default: 0.15]
heuristics/undercover/mincoveredrel = 0.15
# factor by which the heuristic should at least improve the incumbent
# [type: real, advanced: TRUE, range: [-1,1], default: 0]
heuristics/undercover/minimprove = 0
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/undercover/nodesquot = 0.1
# fraction of covering variables in the last cover which need to change their value when recovering
# [type: real, advanced: TRUE, range: [0,1], default: 0.9]
heuristics/undercover/recoverdiv = 0.9
# minimum number of nonlinear constraints in the original problem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 5]
heuristics/undercover/mincoveredabs = 5
# maximum number of backtracks in fix-and-propagate
# [type: int, advanced: TRUE, range: [0,2147483647], default: 6]
heuristics/undercover/maxbacktracks = 6
# maximum number of recoverings
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
heuristics/undercover/maxrecovers = 0
# maximum number of reorderings of the fixing order
# [type: int, advanced: TRUE, range: [0,2147483647], default: 1]
heuristics/undercover/maxreorders = 1
# objective function of the covering problem (influenced nonlinear 'c'onstraints/'t'erms, 'd'omain size, 'l'ocks, 'm'in of up/down locks, 'u'nit penalties)
# [type: char, advanced: TRUE, range: {cdlmtu}, default: u]
heuristics/undercover/coveringobj = u
# order in which variables should be fixed (increasing 'C'onflict score, decreasing 'c'onflict score, increasing 'V'ariable index, decreasing 'v'ariable index
# [type: char, advanced: TRUE, range: {CcVv}, default: v]
heuristics/undercover/fixingorder = v
# should the heuristic be called at root node before cut separation?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/undercover/beforecuts = TRUE
# should integer variables in the cover be fixed first?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/undercover/fixintfirst = FALSE
# shall LP values for integer vars be rounded according to locks?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/undercover/locksrounding = TRUE
# should we only fix variables in order to obtain a convex problem?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/undercover/onlyconvexify = FALSE
# should the NLP heuristic be called to polish a feasible solution?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/undercover/postnlp = TRUE
# should bounddisjunction constraints be covered (or just copied)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/undercover/coverbd = FALSE
# should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/undercover/copycuts = TRUE
# shall the cover be reused if a conflict was added after an infeasible subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/undercover/reusecover = FALSE
# priority of heuristic <vbounds>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 2500]
heuristics/vbounds/priority = 2500
# frequency for calling primal heuristic <vbounds> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/vbounds/freq = 0
# frequency offset for calling primal heuristic <vbounds>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/vbounds/freqofs = 0
# maximal depth level to call primal heuristic <vbounds> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/vbounds/maxdepth = -1
# minimum percentage of integer variables that have to be fixed
# [type: real, advanced: FALSE, range: [0,1], default: 0.65]
heuristics/vbounds/minintfixingrate = 0.65
# minimum percentage of variables that have to be fixed within sub-SCIP (integer and continuous)
# [type: real, advanced: FALSE, range: [0,1], default: 0.65]
heuristics/vbounds/minmipfixingrate = 0.65
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 5000]
heuristics/vbounds/maxnodes = 5000
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 500]
heuristics/vbounds/nodesofs = 500
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 500]
heuristics/vbounds/minnodes = 500
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/vbounds/nodesquot = 0.1
# factor by which vbounds heuristic should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/vbounds/minimprove = 0.01
# maximum number of propagation rounds during probing (-1 infinity)
# [type: int, advanced: TRUE, range: [-1,536870911], default: 2]
heuristics/vbounds/maxproprounds = 2
# should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/vbounds/copycuts = TRUE
# should more variables be fixed based on variable locks if the fixing rate was not reached?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/vbounds/uselockfixings = FALSE
# maximum number of backtracks during the fixing process
# [type: int, advanced: TRUE, range: [-1,536870911], default: 10]
heuristics/vbounds/maxbacktracks = 10
# which variants of the vbounds heuristic that try to stay feasible should be called? (0: off, 1: w/o looking at obj, 2: only fix to best bound, 4: only fix to worst bound
# [type: int, advanced: TRUE, range: [0,7], default: 6]
heuristics/vbounds/feasvariant = 6
# which tightening variants of the vbounds heuristic should be called? (0: off, 1: w/o looking at obj, 2: only fix to best bound, 4: only fix to worst bound
# [type: int, advanced: TRUE, range: [0,7], default: 7]
heuristics/vbounds/tightenvariant = 7
# priority of heuristic <veclendiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1003100]
heuristics/veclendiving/priority = -1003100
# frequency for calling primal heuristic <veclendiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/veclendiving/freq = 10
# frequency offset for calling primal heuristic <veclendiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 4]
heuristics/veclendiving/freqofs = 4
# maximal depth level to call primal heuristic <veclendiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/veclendiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/veclendiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/veclendiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/veclendiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/veclendiving/maxlpiterofs = 1000
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/veclendiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/veclendiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/veclendiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/veclendiving/maxdiveavgquotnosol = 0
# use one level of backtracking if infeasibility is encountered?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/veclendiving/backtrack = TRUE
# percentage of immediate domain changes during probing to trigger LP resolve
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.15]
heuristics/veclendiving/lpresolvedomchgquot = 0.15
# LP solve frequency for diving heuristics (0: only after enough domain changes have been found)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
heuristics/veclendiving/lpsolvefreq = 0
# should only LP branching candidates be considered instead of the slower but more general constraint handler diving variable selection?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/veclendiving/onlylpbranchcands = FALSE
# priority of heuristic <zirounding>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -500]
heuristics/zirounding/priority = -500
# frequency for calling primal heuristic <zirounding> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/zirounding/freq = 1
# frequency offset for calling primal heuristic <zirounding>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/zirounding/freqofs = 0
# maximal depth level to call primal heuristic <zirounding> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/zirounding/maxdepth = -1
# determines maximum number of rounding loops
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 2]
heuristics/zirounding/maxroundingloops = 2
# flag to determine if Zirounding is deactivated after a certain percentage of unsuccessful calls
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/zirounding/stopziround = TRUE
# if percentage of found solutions falls below this parameter, Zirounding will be deactivated
# [type: real, advanced: TRUE, range: [0,1], default: 0.02]
heuristics/zirounding/stoppercentage = 0.02
# determines the minimum number of calls before percentage-based deactivation of Zirounding is applied
# [type: int, advanced: TRUE, range: [1,2147483647], default: 1000]
heuristics/zirounding/minstopncalls = 1000
# priority of heuristic <zeroobj>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 100]
heuristics/zeroobj/priority = 100
# frequency for calling primal heuristic <zeroobj> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/zeroobj/freq = -1
# frequency offset for calling primal heuristic <zeroobj>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/zeroobj/freqofs = 0
# maximal depth level to call primal heuristic <zeroobj> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: 0]
heuristics/zeroobj/maxdepth = 0
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 1000]
heuristics/zeroobj/maxnodes = 1000
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 100]
heuristics/zeroobj/nodesofs = 100
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 100]
heuristics/zeroobj/minnodes = 100
# maximum number of LP iterations to be performed in the subproblem
# [type: longint, advanced: TRUE, range: [-1,9223372036854775807], default: 5000]
heuristics/zeroobj/maxlpiters = 5000
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/zeroobj/nodesquot = 0.1
# factor by which zeroobj should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/zeroobj/minimprove = 0.01
# should all subproblem solutions be added to the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/zeroobj/addallsols = FALSE
# should heuristic only be executed if no primal solution was found, yet?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/zeroobj/onlywithoutsol = TRUE
# should uct node selection be used at the beginning of the search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/zeroobj/useuct = FALSE
# priority of heuristic <simplerounding>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 0]
heuristics/simplerounding/priority = 0
# frequency for calling primal heuristic <simplerounding> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/simplerounding/freq = 1
# frequency offset for calling primal heuristic <simplerounding>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/simplerounding/freqofs = 0
# maximal depth level to call primal heuristic <simplerounding> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/simplerounding/maxdepth = -1
# should the heuristic only be called once per node?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/simplerounding/oncepernode = FALSE
# priority of separator <clique>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -5000]
separating/clique/priority = -5000
# frequency for calling separator <clique> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
separating/clique/freq = 0
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <clique> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 0]
separating/clique/maxbounddist = 0
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/clique/delay = FALSE
# base for exponential increase of frequency at which separator <clique> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/clique/expbackoff = 4
# factor for scaling weights
# [type: real, advanced: TRUE, range: [1,1.79769313486232e+308], default: 1000]
separating/clique/scaleval = 1000
# maximal number of nodes in branch and bound tree (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10000]
separating/clique/maxtreenodes = 10000
# frequency for premature backtracking up to tree level 1 (0: no backtracking)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 1000]
separating/clique/backtrackfreq = 1000
# maximal number of clique cuts separated per separation round (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 10]
separating/clique/maxsepacuts = 10
# maximal number of zero-valued variables extending the clique (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 1000]
separating/clique/maxzeroextensions = 1000
# maximal memory size of dense clique table (in kb)
# [type: real, advanced: TRUE, range: [0,2097151.99902344], default: 20000]
separating/clique/cliquetablemem = 20000
# minimal density of cliques to use a dense clique table
# [type: real, advanced: TRUE, range: [0,1], default: 0]
separating/clique/cliquedensity = 0
# priority of separator <gomory>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1000]
separating/gomory/priority = -1000
# frequency for calling separator <gomory> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
separating/gomory/freq = 10
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <gomory> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/gomory/maxbounddist = 1
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/gomory/delay = FALSE
# base for exponential increase of frequency at which separator <gomory> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/gomory/expbackoff = 4
# maximal number of gomory separation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 5]
separating/gomory/maxrounds = 5
# maximal number of gomory separation rounds in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 10]
separating/gomory/maxroundsroot = 10
# maximal number of gomory cuts separated per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 50]
separating/gomory/maxsepacuts = 50
# maximal number of gomory cuts separated per separation round in the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 200]
separating/gomory/maxsepacutsroot = 200
# maximal rank of a gomory cut that could not be scaled to integral coefficients (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
separating/gomory/maxrank = -1
# maximal rank of a gomory cut that could be scaled to integral coefficients (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
separating/gomory/maxrankintegral = -1
# minimal integrality violation of a basis variable in order to try Gomory cut
# [type: real, advanced: FALSE, range: [0.0001,0.5], default: 0.01]
separating/gomory/away = 0.01
# should generated cuts be removed from the LP if they are no longer tight?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
separating/gomory/dynamiccuts = TRUE
# try to scale cuts to integral coefficients
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/gomory/makeintegral = FALSE
# if conversion to integral coefficients failed still consider the cut
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/gomory/forcecuts = TRUE
# separate rows with integral slack
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/gomory/separaterows = TRUE
# should cuts be added to the delayed cut pool?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/gomory/delayedcuts = FALSE
# choose side types of row (lhs/rhs) based on basis information?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/gomory/sidetypebasis = TRUE
# priority of separator <impliedbounds>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -50]
separating/impliedbounds/priority = -50
# frequency for calling separator <impliedbounds> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
separating/impliedbounds/freq = 10
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <impliedbounds> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/impliedbounds/maxbounddist = 1
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/impliedbounds/delay = FALSE
# base for exponential increase of frequency at which separator <impliedbounds> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/impliedbounds/expbackoff = 4
# should violated inequalities for cliques with 2 variables be separated?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/impliedbounds/usetwosizecliques = TRUE
# priority of separator <intobj>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -100]
separating/intobj/priority = -100
# frequency for calling separator <intobj> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
separating/intobj/freq = -1
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <intobj> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 0]
separating/intobj/maxbounddist = 0
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/intobj/delay = FALSE
# base for exponential increase of frequency at which separator <intobj> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/intobj/expbackoff = 4
# priority of separator <mcf>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -10000]
separating/mcf/priority = -10000
# frequency for calling separator <mcf> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
separating/mcf/freq = 0
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <mcf> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 0]
separating/mcf/maxbounddist = 0
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/mcf/delay = FALSE
# base for exponential increase of frequency at which separator <mcf> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/mcf/expbackoff = 4
# number of clusters to generate in the shrunken network -- default separation
# [type: int, advanced: TRUE, range: [2,32], default: 5]
separating/mcf/nclusters = 5
# maximal valid range max(|weights|)/min(|weights|) of row weights
# [type: real, advanced: TRUE, range: [1,1.79769313486232e+308], default: 1000000]
separating/mcf/maxweightrange = 1000000
# maximal number of different deltas to try (-1: unlimited) -- default separation
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 20]
separating/mcf/maxtestdelta = 20
# should negative values also be tested in scaling?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/mcf/trynegscaling = FALSE
# should an additional variable be complemented if f0 = 0?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/mcf/fixintegralrhs = TRUE
# should generated cuts be removed from the LP if they are no longer tight?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
separating/mcf/dynamiccuts = TRUE
# model type of network (0: auto, 1:directed, 2:undirected)
# [type: int, advanced: TRUE, range: [0,2], default: 0]
separating/mcf/modeltype = 0
# maximal number of mcf cuts separated per separation round
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 100]
separating/mcf/maxsepacuts = 100
# maximal number of mcf cuts separated per separation round in the root node -- default separation
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 200]
separating/mcf/maxsepacutsroot = 200
# maximum inconsistency ratio for separation at all
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.02]
separating/mcf/maxinconsistencyratio = 0.02
# maximum inconsistency ratio of arcs not to be deleted
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.5]
separating/mcf/maxarcinconsistencyratio = 0.5
# should we separate only if the cuts shores are connected?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/mcf/checkcutshoreconnectivity = TRUE
# should we separate inequalities based on single-node cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/mcf/separatesinglenodecuts = TRUE
# should we separate flowcutset inequalities on the network cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/mcf/separateflowcutset = TRUE
# should we separate knapsack cover inequalities on the network cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/mcf/separateknapsack = TRUE
# priority of separator <oddcycle>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -15000]
separating/oddcycle/priority = -15000
# frequency for calling separator <oddcycle> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
separating/oddcycle/freq = -1
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <oddcycle> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/oddcycle/maxbounddist = 1
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/oddcycle/delay = FALSE
# base for exponential increase of frequency at which separator <oddcycle> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/oddcycle/expbackoff = 4
# Should the search method by Groetschel, Lovasz, Schrijver be used? Otherwise use levelgraph method by Hoffman, Padberg.
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
separating/oddcycle/usegls = TRUE
# Should odd cycle cuts be lifted?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
separating/oddcycle/liftoddcycles = FALSE
# maximal number of oddcycle cuts separated per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 5000]
separating/oddcycle/maxsepacuts = 5000
# maximal number of oddcycle cuts separated per separation round in the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 5000]
separating/oddcycle/maxsepacutsroot = 5000
# maximal number of oddcycle separation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 10]
separating/oddcycle/maxrounds = 10
# maximal number of oddcycle separation rounds in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 10]
separating/oddcycle/maxroundsroot = 10
# factor for scaling of the arc-weights
# [type: int, advanced: TRUE, range: [1,2147483647], default: 1000]
separating/oddcycle/scalingfactor = 1000
# add links between a variable and its negated
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/oddcycle/addselfarcs = TRUE
# try to repair violated cycles with double appearance of a variable
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/oddcycle/repaircycles = TRUE
# separate triangles found as 3-cycles or repaired larger cycles
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/oddcycle/includetriangles = TRUE
# Even if a variable is already covered by a cut, still try it as start node for a cycle search?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/oddcycle/multiplecuts = FALSE
# Even if a variable is already covered by a cut, still allow another cut to cover it too?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/oddcycle/allowmultiplecuts = TRUE
# Choose lifting candidate by coef*lpvalue or only by coef?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/oddcycle/lpliftcoef = FALSE
# Calculate lifting coefficient of every candidate in every step (or only if its chosen)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/oddcycle/recalcliftcoef = TRUE
# use sorted variable array (unsorted(0), maxlp(1), minlp(2), maxfrac(3), minfrac(4))
# [type: int, advanced: TRUE, range: [0,4], default: 3]
separating/oddcycle/sortswitch = 3
# sort level of the root neighbors by fractionality (maxfrac)
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/oddcycle/sortrootneighbors = TRUE
# percentage of variables to try the chosen method on [0-100]
# [type: int, advanced: TRUE, range: [0,100], default: 0]
separating/oddcycle/percenttestvars = 0
# offset of variables to try the chosen method on (additional to the percentage of testvars)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 100]
separating/oddcycle/offsettestvars = 100
# percentage of nodes allowed in the same level of the level graph [0-100]
# [type: int, advanced: TRUE, range: [0,100], default: 100]
separating/oddcycle/maxpernodeslevel = 100
# offset of nodes allowed in the same level of the level graph (additional to the percentage of levelnodes)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 10]
separating/oddcycle/offsetnodeslevel = 10
# maximal number of levels in level graph
# [type: int, advanced: TRUE, range: [0,2147483647], default: 20]
separating/oddcycle/maxnlevels = 20
# maximal number of oddcycle cuts generated per chosen variable as root of the level graph
# [type: int, advanced: TRUE, range: [0,2147483647], default: 1]
separating/oddcycle/maxcutsroot = 1
# maximal number of oddcycle cuts generated in every level of the level graph
# [type: int, advanced: TRUE, range: [0,2147483647], default: 50]
separating/oddcycle/maxcutslevel = 50
# minimal weight on an edge (in level graph or bipartite graph)
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
separating/oddcycle/maxreference = 0
# number of unsuccessful calls at current node
# [type: int, advanced: TRUE, range: [0,2147483647], default: 3]
separating/oddcycle/maxunsucessfull = 3
# maximal number of other cuts s.t. separation is applied (-1 for direct call)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: -1]
separating/oddcycle/cutthreshold = -1
# priority of separator <strongcg>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -2000]
separating/strongcg/priority = -2000
# frequency for calling separator <strongcg> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
separating/strongcg/freq = 10
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <strongcg> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/strongcg/maxbounddist = 1
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/strongcg/delay = FALSE
# base for exponential increase of frequency at which separator <strongcg> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/strongcg/expbackoff = 4
# maximal number of strong CG separation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 5]
separating/strongcg/maxrounds = 5
# maximal number of strong CG separation rounds in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 20]
separating/strongcg/maxroundsroot = 20
# maximal number of strong CG cuts separated per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 20]
separating/strongcg/maxsepacuts = 20
# maximal number of strong CG cuts separated per separation round in the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 500]
separating/strongcg/maxsepacutsroot = 500
# should generated cuts be removed from the LP if they are no longer tight?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
separating/strongcg/dynamiccuts = TRUE
# priority of separator <zerohalf>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -6000]
separating/zerohalf/priority = -6000
# frequency for calling separator <zerohalf> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
separating/zerohalf/freq = 10
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <zerohalf> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/zerohalf/maxbounddist = 1
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/zerohalf/delay = FALSE
# base for exponential increase of frequency at which separator <zerohalf> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/zerohalf/expbackoff = 4
# maximal number of zerohalf separation rounds per node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 5]
separating/zerohalf/maxrounds = 5
# maximal number of zerohalf separation rounds in the root node (-1: unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 20]
separating/zerohalf/maxroundsroot = 20
# maximal number of zerohalf cuts separated per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 20]
separating/zerohalf/maxsepacuts = 20
# initial seed used for random tie-breaking in cut selection
# [type: int, advanced: FALSE, range: [0,2147483647], default: 24301]
separating/zerohalf/initseed = 24301
# maximal number of zerohalf cuts separated per separation round in the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100]
separating/zerohalf/maxsepacutsroot = 100
# maximal number of zerohalf cuts considered per separation round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2000]
separating/zerohalf/maxcutcands = 2000
# maximal slack of rows to be used in aggregation
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
separating/zerohalf/maxslack = 0
# maximal slack of rows to be used in aggregation in the root node
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
separating/zerohalf/maxslackroot = 0
# threshold for score of cut relative to best score to be considered good, so that less strict filtering is applied
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/zerohalf/goodscore = 1
# threshold for score of cut relative to best score to be discarded
# [type: real, advanced: TRUE, range: [0,1], default: 0.5]
separating/zerohalf/badscore = 0.5
# weight of objective parallelism in cut score calculation
# [type: real, advanced: TRUE, range: [0,1], default: 0]
separating/zerohalf/objparalweight = 0
# weight of efficacy in cut score calculation
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/zerohalf/efficacyweight = 1
# weight of directed cutoff distance in cut score calculation
# [type: real, advanced: TRUE, range: [0,1], default: 0]
separating/zerohalf/dircutoffdistweight = 0
# maximum parallelism for good cuts
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
separating/zerohalf/goodmaxparall = 0.1
# maximum parallelism for non-good cuts
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
separating/zerohalf/maxparall = 0.1
# minimal violation to generate zerohalfcut for
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.1]
separating/zerohalf/minviol = 0.1
# should generated cuts be removed from the LP if they are no longer tight?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
separating/zerohalf/dynamiccuts = TRUE
# maximal density of row to be used in aggregation
# [type: real, advanced: TRUE, range: [0,1], default: 0.05]
separating/zerohalf/maxrowdensity = 0.05
# additional number of variables allowed in row on top of density
# [type: int, advanced: TRUE, range: [0,2147483647], default: 100]
separating/zerohalf/densityoffset = 100
# priority of separator <closecuts>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 1000000]
separating/closecuts/priority = 1000000
# frequency for calling separator <closecuts> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
separating/closecuts/freq = -1
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <closecuts> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/closecuts/maxbounddist = 1
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/closecuts/delay = FALSE
# base for exponential increase of frequency at which separator <closecuts> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/closecuts/expbackoff = 4
# generate close cuts w.r.t. relative interior point (best solution otherwise)?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/closecuts/separelint = TRUE
# convex combination value for close cuts
# [type: real, advanced: TRUE, range: [0,1], default: 0.3]
separating/closecuts/sepacombvalue = 0.3
# threshold on number of generated cuts below which the ordinary separation is started
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 50]
separating/closecuts/closethres = 50
# include an objective cutoff when computing the relative interior?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/closecuts/inclobjcutoff = FALSE
# recompute relative interior point in each separation call?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/closecuts/recomputerelint = FALSE
# turn off separation in current node after unsuccessful calls (-1 never turn off)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 0]
separating/closecuts/maxunsuccessful = 0
# factor for maximal LP iterations in relative interior computation compared to node LP iterations (negative for no limit)
# [type: real, advanced: TRUE, range: [-1,1.79769313486232e+308], default: 10]
separating/closecuts/maxlpiterfactor = 10
# priority of separator <rapidlearning>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1200000]
separating/rapidlearning/priority = -1200000
# frequency for calling separator <rapidlearning> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
separating/rapidlearning/freq = -1
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying separator <rapidlearning> (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: TRUE, range: [0,1], default: 1]
separating/rapidlearning/maxbounddist = 1
# should separator be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/rapidlearning/delay = FALSE
# base for exponential increase of frequency at which separator <rapidlearning> is called (1: call at each multiple of frequency)
# [type: int, advanced: TRUE, range: [1,100], default: 4]
separating/rapidlearning/expbackoff = 4
# should the found conflicts be applied in the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/rapidlearning/applyconflicts = TRUE
# should the found global bound deductions be applied in the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/rapidlearning/applybdchgs = TRUE
# should the inference values be used as initialization in the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/rapidlearning/applyinfervals = TRUE
# should the inference values only be used when rapidlearning found other reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/rapidlearning/reducedinfer = FALSE
# should the incumbent solution be copied to the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/rapidlearning/applyprimalsol = TRUE
# should a solved status be copied to the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/rapidlearning/applysolved = TRUE
# should rapid learning be applied when there are continuous variables?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
separating/rapidlearning/contvars = FALSE
# maximal portion of continuous variables to apply rapid learning
# [type: real, advanced: TRUE, range: [0,1], default: 0.3]
separating/rapidlearning/contvarsquot = 0.3
# maximal fraction of LP iterations compared to node LP iterations
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0.2]
separating/rapidlearning/lpiterquot = 0.2
# maximum problem size (variables) for which rapid learning will be called
# [type: int, advanced: TRUE, range: [0,2147483647], default: 10000]
separating/rapidlearning/maxnvars = 10000
# maximum problem size (constraints) for which rapid learning will be called
# [type: int, advanced: TRUE, range: [0,2147483647], default: 10000]
separating/rapidlearning/maxnconss = 10000
# maximum number of nodes considered in rapid learning run
# [type: int, advanced: TRUE, range: [0,2147483647], default: 5000]
separating/rapidlearning/maxnodes = 5000
# minimum number of nodes considered in rapid learning run
# [type: int, advanced: TRUE, range: [0,2147483647], default: 500]
separating/rapidlearning/minnodes = 500
# should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
separating/rapidlearning/copycuts = TRUE
# priority of relaxation handler <gcg>
# [type: int, advanced: FALSE, range: [-536870912,536870911], default: -1]
relaxing/gcg/priority = -1
# frequency for calling relaxation handler <gcg> (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
relaxing/gcg/freq = 1
# maximal number of columns per Farkas pricing round
# [type: int, advanced: FALSE, range: [1,2147483647], default: 10]
pricing/masterpricer/maxcolsroundfarkas = 10
# maximal number of columns per problem to be generated during Farkas pricing
# [type: int, advanced: FALSE, range: [1,2147483647], default: 10]
pricing/masterpricer/maxcolsprobfarkas = 10
# maximal percentage of Farkas pricing problems that are solved if variables have already been found
# [type: real, advanced: FALSE, range: [0,1], default: 1]
pricing/masterpricer/relmaxprobsfarkas = 1
# maximal number of pricing rounds per node after the root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
pricing/masterpricer/maxroundsredcost = 2147483647
# maximal number of columns per reduced cost pricing round at root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100]
pricing/masterpricer/maxcolsroundredcostroot = 100
# maximal number of columns per reduced cost pricing round
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100]
pricing/masterpricer/maxcolsroundredcost = 100
# maximal number of columns per problem to be generated during red. cost pricing at root node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
pricing/masterpricer/maxcolsprobredcostroot = 10
# maximal number of columns per problem to be generated during red. cost pricing
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
pricing/masterpricer/maxcolsprobredcost = 10
# maximal number of successfully solved red. cost pricing problems
# [type: int, advanced: FALSE, range: [1,2147483647], default: 2147483647]
pricing/masterpricer/maxsuccessfulprobsredcost = 2147483647
# maximal percentage of red. cost pricing problems that are solved at root node if variables have already been found
# [type: real, advanced: FALSE, range: [0,1], default: 1]
pricing/masterpricer/relmaxprobsredcostroot = 1
# maximal percentage of red. cost pricing problems that are solved if variables have already been found
# [type: real, advanced: FALSE, range: [0,1], default: 1]
pricing/masterpricer/relmaxprobsredcost = 1
# maximum number of heuristic pricing iterations per pricing call and problem
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
pricing/masterpricer/heurpricingiters = 1
# maximum depth at which heuristic pricing should be performed (-1 for infinity)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
pricing/masterpricer/maxheurdepth = -1
# order by which the pricing problems should be sorted ('i'ndices, 'd'ual solutions of convexity constraints, 'r'eliability from previous rounds, reliability from the 'l'ast nroundscol rounds)
# [type: char, advanced: FALSE, range: {dilr}, default: r]
pricing/masterpricer/sorting = r
# number of previous pricing rounds for which the number of improving columns should be counted
# [type: int, advanced: TRUE, range: [1,2147483647], default: 15]
pricing/masterpricer/nroundscol = 15
# maximal percentage of pricing problems that need to be solved successfully
# [type: real, advanced: FALSE, range: [0,1], default: 1]
pricing/masterpricer/relmaxsuccessfulprobs = 1
# maximal number of pricing problems to be solved during one pricing loop
# [type: int, advanced: TRUE, range: [1,2147483647], default: 2147483647]
pricing/masterpricer/chunksize = 2147483647
# frequency at which all pricingproblems should be solved (0 to disable)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 10]
pricing/masterpricer/eagerfreq = 10
# time limit per iteration of a pricing job
# [type: real, advanced: FALSE, range: [0,1e+20], default: 1e+20]
pricing/masterpricer/jobtimelimit = 1e+20
# maximal number of variables per block to be added in a pricer call
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
pricing/masterpricer/maxvarsprob = 2147483647
# should pricing be aborted due to integral objective function?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
pricing/masterpricer/abortpricingint = TRUE
# gap between dual bound and RMP objective at which pricing is aborted
# [type: real, advanced: TRUE, range: [0,1], default: 0]
pricing/masterpricer/abortpricinggap = 0
# should additional informations concerning the pricing process be displayed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
pricing/masterpricer/dispinfos = FALSE
# how many threads should be used to concurrently solve the pricing problem (0 to guess threads by OpenMP)
# [type: int, advanced: FALSE, range: [0,4096], default: 0]
pricing/masterpricer/threads = 0
# should stabilization be performed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
pricing/masterpricer/stabilization = TRUE
# should the colpool be checked for negative redcost cols before solving the pricing problems?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
pricing/masterpricer/usecolpool = TRUE
# should hybridization of smoothing with an ascent method be enabled?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
pricing/masterpricer/stabilization/hybridascent = FALSE
# should hybridization of smoothing with an ascent method be enabled if pricing problems cannot be aggregation?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
pricing/masterpricer/stabilization/hybridascentnoagg = FALSE
# should artificial variables be used to make the RMP feasible (instead of applying Farkas pricing)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
pricing/masterpricer/useartificialvars = FALSE
# use maxobj for big M objective of artificial variables
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
pricing/masterpricer/usemaxobj = TRUE
# only use maxobj for big M objective of artificial variables if it is reliable
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
pricing/masterpricer/onlyreliablebigm = TRUE
# factor to use for objective of unbounded variables
# [type: real, advanced: FALSE, range: [0,1e+20], default: 1000]
pricing/masterpricer/factorunreliable = 1000
# value for for big M objective of artificial variables (negative if max obj should be used)
# [type: real, advanced: FALSE, range: [0,1e+20], default: 1000]
pricing/masterpricer/bigmartificial = 1000
# should the cutoffbound be applied in master LP solving (0: on, 1:off, 2:auto)?
# [type: int, advanced: FALSE, range: [0,2], default: 2]
pricing/masterpricer/disablecutoff = 2
# age limit for columns in column pool? (-1 for no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 100]
pricing/masterpricer/colpool/agelimit = 100
# factor of -redcost/norm in score function
# [type: real, advanced: FALSE, range: [0,10], default: 1]
pricing/masterpricer/pricestore/redcostfac = 1
# factor of objective parallelism in score function
# [type: real, advanced: FALSE, range: [0,10], default: 0]
pricing/masterpricer/pricestore/objparalfac = 0
# factor of orthogonalities in score function
# [type: real, advanced: FALSE, range: [0,10], default: 0]
pricing/masterpricer/pricestore/orthofac = 0
# minimal orthogonality of columns to add
# [type: real, advanced: FALSE, range: [0,1], default: 0]
pricing/masterpricer/pricestore/mincolorth = 0
# choice to base efficiacy on
# [type: int, advanced: FALSE, range: [0,2], default: 0]
pricing/masterpricer/pricestore/efficiacychoice = 0
# should bounds on variables be enforced by constraints(TRUE) or by bounds(FALSE)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
branching/orig/enforcebycons = FALSE
# should branching be performed on the most fractional variable instead of the first variable?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
branching/orig/mostfrac = FALSE
# should pseudocosts be used to determine the variable on which the branching is performed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
branching/orig/usepseudocosts = TRUE
# should strong branching with propagation be used to determine the variable on which the branching is performed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
branching/orig/usepsstrong = FALSE
# weight in score calculations for conflict score
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 0.01]
branching/relpsprob/conflictweight = 0.01
# weight in score calculations for conflict length score
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 0.0001]
branching/relpsprob/conflictlengthweight = 0.0001
# weight in score calculations for inference score
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 0.1]
branching/relpsprob/inferenceweight = 0.1
# weight in score calculations for cutoff score
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 0.0001]
branching/relpsprob/cutoffweight = 0.0001
# weight in score calculations for pseudo cost score
# [type: real, advanced: TRUE, range: [-1.79769313486232e+308,1.79769313486232e+308], default: 1]
branching/relpsprob/pscostweight = 1
# minimal value for minimum pseudo cost size to regard pseudo cost value as reliable
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 1]
branching/relpsprob/minreliable = 1
# maximal value for minimum pseudo cost size to regard pseudo cost value as reliable
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 8]
branching/relpsprob/maxreliable = 8
# maximal fraction of branching LP iterations compared to node relaxation LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.5]
branching/relpsprob/iterquot = 0.5
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100000]
branching/relpsprob/iterofs = 100000
# maximal number of further variables evaluated without better score
# [type: int, advanced: TRUE, range: [1,2147483647], default: 8]
branching/relpsprob/maxlookahead = 8
# maximal number of candidates initialized with strong branching per node
# [type: int, advanced: FALSE, range: [0,2147483647], default: 100]
branching/relpsprob/initcand = 100
# maximal number of bound tightenings before the node is immediately reevaluated (-1: unlimited)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 20]
branching/relpsprob/maxbdchgs = 20
# minimal number of bound tightenings before bound changes are applied
# [type: int, advanced: TRUE, range: [1,2147483647], default: 1]
branching/relpsprob/minbdchgs = 1
# shall the LP be solved during probing? (TRUE)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
branching/relpsprob/uselp = TRUE
# reliability value for probing
# [type: real, advanced: FALSE, range: [0,1], default: 0.8]
branching/relpsprob/reliability = 0.8
# enable master separator
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
sepa/master/enable = TRUE
# parameter returns which parameter setting is used for separation (default = 0, aggressive = 1, fast = 2
# [type: int, advanced: FALSE, range: [0,2], default: 1]
sepa/master/paramsetting = 1
# is basis separator enabled?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
sepa/basis/enable = TRUE
# is objective constraint of separator enabled?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/enableobj = FALSE
# round obj rhs/lhs of obj constraint if obj is int?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/enableobjround = FALSE
# add cuts generated during pricing to newconss array?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/enableppcuts = FALSE
# is objective constraint for redcost of each pp of separator enabled?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/enableppobjconss = FALSE
# is objective constraint for redcost of each pp during pricing of separator enabled?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/enableppobjcg = FALSE
# generated obj convex dynamically
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/genobjconvex = FALSE
# should positive slack influence the probing objective function?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/enableposslack = FALSE
# exponent of positive slack usage
# [type: int, advanced: FALSE, range: [1,2147483647], default: 1]
sepa/basis/posslackexp = 1
# automatically generated exponent?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/posslackexpgen = FALSE
# factor for automatically generated exponent
# [type: real, advanced: FALSE, range: [1e-09,1e+20], default: 0.1]
sepa/basis/posslackexpgenfactor = 0.1
# convex combination factor (= 0.0, use original objective; = 1.0, use face objective)
# [type: real, advanced: FALSE, range: [0,1], default: 1]
sepa/basis/objconvex = 1
# parameter returns which parameter setting is used for separation (default = 0, aggressive = 1, fast = 2
# [type: int, advanced: FALSE, range: [0,2], default: 1]
sepa/basis/paramsetting = 1
# parameter returns if basis is searched with different objective
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
sepa/basis/chgobj = TRUE
# parameter returns maximum number of separation rounds in probing LP (-1 if unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
sepa/basis/maxrounds = -1
# parameter returns maximum number of separation rounds in probing LP in root node (-1 if unlimited)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
sepa/basis/maxroundsroot = -1
# parameter returns number of minimum cuts needed to return *result = SCIP_Separated
# [type: int, advanced: FALSE, range: [1,100], default: 1]
sepa/basis/mincuts = 1
# parameter returns if obj is changed not only in the first round
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/chgobjallways = FALSE
# parameter returns if cuts are forced to enter the LP
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
sepa/basis/forcecuts = FALSE
# flag to indicate whether solver <knapsack> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
pricingsolver/knapsack/enabled = TRUE
# priority of solver <knapsack>
# [type: int, advanced: FALSE, range: [-536870912,536870911], default: 200]
pricingsolver/knapsack/priority = 200
# flag to indicate whether solver <mip> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
pricingsolver/mip/enabled = TRUE
# priority of solver <mip>
# [type: int, advanced: FALSE, range: [-536870912,536870911], default: 0]
pricingsolver/mip/priority = 0
# should solutions of the pricing MIPs be checked for duplicity?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
pricingsolver/mip/checksols = TRUE
# start node limit for heuristic pricing
# [type: longint, advanced: TRUE, range: [-1,9223372036854775807], default: 1000]
pricingsolver/mip/startnodelimit = 1000
# start stalling node limit for heuristic pricing
# [type: longint, advanced: TRUE, range: [-1,9223372036854775807], default: 100]
pricingsolver/mip/startstallnodelimit = 100
# start gap limit for heuristic pricing
# [type: real, advanced: TRUE, range: [0,1], default: 0.2]
pricingsolver/mip/startgaplimit = 0.2
# start solution limit for heuristic pricing
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
pricingsolver/mip/startsollimit = 10
# factor by which to increase node limit for heuristic pricing
# [type: real, advanced: TRUE, range: [1,1e+20], default: 1.25]
pricingsolver/mip/nodelimitfac = 1.25
# factor by which to increase stalling node limit for heuristic pricing
# [type: real, advanced: TRUE, range: [1,1e+20], default: 1.25]
pricingsolver/mip/stallnodelimitfac = 1.25
# factor by which to decrease gap limit for heuristic pricing
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
pricingsolver/mip/gaplimitfac = 0.8
# factor by which to increase solution limit for heuristic pricing
# [type: real, advanced: TRUE, range: [1,1e+20], default: 1.5]
pricingsolver/mip/sollimitfac = 1.5
# settings file for pricing problems
# [type: string, advanced: TRUE, default: "-"]
pricingsolver/mip/settingsfile = "-"
# should propagated bound changes in the original be enforced in the master (only proper vars)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
relaxing/gcg/enforceproper = TRUE
# filename to write all bounds to
# [type: string, advanced: FALSE, default: ""]
eventhdlr/solvingstats/filename = ""
# should discretization (TRUE) or convexification (FALSE) approach be used?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
relaxing/gcg/discretization = TRUE
# should identical blocks be aggregated (only for discretization approach)?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
relaxing/gcg/aggregation = TRUE
# should additional information about the blocks be displayed?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
relaxing/gcg/dispinfos = FALSE
# the decomposition mode that GCG will use. (0: Dantzig-Wolfe (default), 1: Benders' decomposition)
# [type: int, advanced: FALSE, range: [0,1], default: 0]
relaxing/gcg/mode = 0
# priority of branching rule <empty>
# [type: int, advanced: FALSE, range: [-536870912,536870911], default: 1000000]
branching/empty/priority = 1000000
# maximal depth level, up to which branching rule <empty> should be used (-1 for no limit)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
branching/empty/maxdepth = -1
# maximal relative distance from current node's dual bound to primal bound compared to best node's dual bound for applying branching rule (0.0: only on current best node, 1.0: on all nodes)
# [type: real, advanced: FALSE, range: [0,1], default: 1]
branching/empty/maxbounddist = 1
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
constraints/origbranch/sepafreq = -1
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
constraints/origbranch/propfreq = -1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/origbranch/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: 100]
constraints/origbranch/eagerfreq = 100
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 0]
constraints/origbranch/maxprerounds = 0
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/origbranch/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/origbranch/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 28]
constraints/origbranch/presoltiming = 28
# if true no nonzeros are shown (may improve performance)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
visual/draftmode = FALSE
# type number: 0=default, 1=black and white, 2=manual
# [type: int, advanced: FALSE, range: [0,2], default: 0]
visual/colorscheme = 0
# integer value to scale points on range 1-10
# [type: int, advanced: FALSE, range: [1,10], default: 2]
visual/nonzeroradius = 2
# maximum number of decompositions to write (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
visual/nmaxdecompstowrite = -1
# pdf reader that opens visualizations in select menu
# [type: string, advanced: FALSE, default: "evince"]
visual/pdfreader = "evince"
# color for master variables in hex code
# [type: string, advanced: FALSE, default: "#1340C7"]
visual/colors/colormastervars = "#1340C7"
# color for master constraints in hex code
# [type: string, advanced: FALSE, default: "#1340C7"]
visual/colors/colormasterconss = "#1340C7"
# color for linking variables in hex code
# [type: string, advanced: FALSE, default: "#FFB72D"]
visual/colors/colorlinking = "#FFB72D"
# color for stairlinking variables in hex code
# [type: string, advanced: FALSE, default: "#886100"]
visual/colors/colorstairlinking = "#886100"
# color for found blocks in hex code
# [type: string, advanced: FALSE, default: "#718CDB"]
visual/colors/colorblock = "#718CDB"
# color for open areas in hex code
# [type: string, advanced: FALSE, default: "#FFD88F"]
visual/colors/coloropen = "#FFD88F"
# color for nonzeros in hex code
# [type: string, advanced: FALSE, default: "#000000"]
visual/colors/colornonzeros = "#000000"
# color for lines in hex code
# [type: string, advanced: FALSE, default: "#000000"]
visual/colors/colorlines = "#000000"
# maximum number of decompositions shown in report (best scores first)
# [type: int, advanced: FALSE, range: [1,2147483647], default: 20]
visual/report/maxndecomps = 20
# only decompositions of type: 0=all types, 1=arrowhead, 2=staircase, 3=diagonal, 4=bordered
# [type: int, advanced: FALSE, range: [0,4], default: 0]
visual/report/showtype = 0
# if true a title page is included
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
visual/report/showtitle = TRUE
# if true a table of contents is included
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
visual/report/showtoc = TRUE
# if true statistics are included for each decomp
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
visual/report/showstatistics = TRUE
# if true gnuplot is used for sub-visualizations in report, otherwise LaTeX/Tikz
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
visual/report/usegp = FALSE
# maximum number of finished decompositions in family tree
# [type: int, advanced: FALSE, range: [1,2147483647], default: 5]
visual/famtree/maxndecomps = 5
# should the transformed (and possibly presolved problem) be use or original one
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
reading/clsreader/usetransform = TRUE
# frequency for separating cuts (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
constraints/decomp/sepafreq = -1
# frequency for propagating domains (-1: never, 0: only in root node)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
constraints/decomp/propfreq = -1
# timing when constraint propagation should be called (1:BEFORELP, 2:DURINGLPLOOP, 4:AFTERLPLOOP, 15:ALWAYS)
# [type: int, advanced: TRUE, range: [1,15], default: 1]
constraints/decomp/proptiming = 1
# frequency for using all instead of only the useful constraints in separation, propagation and enforcement (-1: never, 0: only in first evaluation)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
constraints/decomp/eagerfreq = -1
# maximal number of presolving rounds the constraint handler participates in (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 0]
constraints/decomp/maxprerounds = 0
# should separation method be delayed, if other separators found cuts?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/decomp/delaysepa = FALSE
# should propagation method be delayed, if other propagators found reductions?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
constraints/decomp/delayprop = FALSE
# timing mask of the constraint handler's presolving method (4:FAST, 8:MEDIUM, 16:EXHAUSTIVE, 32:FINAL)
# [type: int, advanced: TRUE, range: [4,60], default: 28]
constraints/decomp/presoltiming = 28
# indicates whether to create a decomposition with all constraints in the master if no other specified
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
constraints/decomp/createbasicdecomp = FALSE
# indicates whether classifier duplicates are allowed (for statistical reasons)
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/allowclassifierduplicates/enabled = FALSE
# indicates whether emphasis setting are set to fast
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
detection/emphfast/enabled = FALSE
# conss adjecency datastructures should be calculated
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/conssadjcalculated = TRUE
# indicates whether to start detection for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/origprob/enabled = FALSE
# indicates whether to classify constraints and variables for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/origprob/classificationenabled = FALSE
# indicates whether constraint classifier for nonzero entries is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/consclassifier/nnonzeros/enabled = TRUE
# indicates whether constraint classifier for nonzero entries is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/consclassifier/nnonzeros/origenabled = TRUE
# indicates whether constraint classifier for scipconstype is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/consclassifier/scipconstype/enabled = TRUE
# indicates whether constraint classifier for scipconsstype is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/consclassifier/scipconstype/origenabled = TRUE
# indicates whether constraint classifier for miplib constypes is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/consclassifier/miplibconstype/enabled = TRUE
# indicates whether constraint classifier for miplib consstype is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/consclassifier/miplibconstype/origenabled = TRUE
# indicates whether constraint classifier for constraint names (remove digits; check for identity) is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/consclassifier/consnamenonumbers/enabled = FALSE
# indicates whether constraint classifier for constraint names (remove digits; check for identity) is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/consclassifier/consnamenonumbers/origenabled = FALSE
# indicates whether constraint classifier for constraint names (according to levenshtein distance graph) is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/consclassifier/consnamelevenshtein/enabled = FALSE
# indicates whether constraint classifier for constraint names (according to levenshtein distance graph) is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/consclassifier/consnamelevenshtein/origenabled = FALSE
# indicates whether variable classifier for scipvartypes is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/varclassifier/scipvartype/enabled = TRUE
# indicates whether variable classifier for scipvartypes is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/varclassifier/scipvartype/origenabled = TRUE
# indicates whether variable classifier for objective function values is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/varclassifier/objectivevalues/enabled = TRUE
# indicates whether only decomposition with only continiuous variables in the subproblems should be searched
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/benders/onlycontsubpr = FALSE
# indicates whether only decomposition with only binary variables in the master should be searched
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/benders/onlybinmaster = FALSE
# indicates whether variable classifier for objective function values is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/varclassifier/objectivevalues/origenabled = TRUE
# indicates whether variable classifier for objective function value signs is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/varclassifier/objectivevaluesigns/enabled = TRUE
# indicates whether variable classifier for objective function value signs is enabled for the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/varclassifier/objectivevaluesigns/origenabled = TRUE
# indicates whether detection should only consist of legacy mode detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/legacymode/onlylegacymode = FALSE
# indicates whether detection consist of legacy mode detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/legacymode/enabled = FALSE
# indicates whether heuristic to reassign linking vars to stairlinking in legacy mode should be activated
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/legacymode/stairlinkingheur = FALSE
# indicates whether miplib2017 features should be written
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
write/miplib2017features = FALSE
# indicates whether dec and gp files are written for miplib2017
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
write/miplib2017plotsanddecs = FALSE
# indicates whether base features for miplib 2017 should be shortened
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
write/miplib2017shortbasefeatures = TRUE
# indicates whether benders detection is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/benders/enabled = FALSE
# path to the file for miplib2017 feature output
# [type: string, advanced: FALSE, default: "."]
write/miplib2017featurefilepath = "."
# path to matrix gp file that is to write
# [type: string, advanced: FALSE, default: "."]
write/miplib2017matrixfilepath = "."
# path to decomp dec and gp files to write
# [type: string, advanced: FALSE, default: "."]
write/miplib2017decompfilepath = "."
# Method for random dual values use for strong decomposition: 1) naive, 2) expected equality exponential distributed, 3) expected overestimation exponential distributed
# [type: int, advanced: FALSE, range: [1,3], default: 1]
detection/strong_detection/dualvalrandommethod = 1
# convex coefficient for orig dual val (1-this coef is factor for random dual value)
# [type: real, advanced: FALSE, range: [0,1], default: 0.5]
detection/strong_detection/coeffactororigvsrandom = 0.5
# Maximum number of detection loop rounds
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/maxrounds = 1
# Maximum number of classes a classifier can have to be used for voting nblockcandidates
# [type: int, advanced: FALSE, range: [0,2147483647], default: 18]
detection/maxnclassesfornblockcandidates = 18
# Maximum number of classes per classifier
# [type: int, advanced: FALSE, range: [0,2147483647], default: 9]
detection/maxnclassesperclassifier = 9
# Maximum number of classes per classifier for large problems (nconss + nvars >= 50000)
# [type: int, advanced: FALSE, range: [0,2147483647], default: 5]
detection/maxnclassesperclassifierforlargeprobs = 5
# Weighting method when comparing decompositions for presolved and unpresolved problem
# [type: int, advanced: TRUE, range: [0,3], default: 0]
detection/origprob/weightinggpresolvedoriginaldecomps = 0
# indicates which score should be used for comparing (partial) decompositions (0:max white, 1: border area, 2:classic, 3:max foreseeing white, 4: ppc-max-white, 5:max foreseeing white with aggregation info, 6: ppc-max-white with aggregation info, 7: experimental benders score):
# [type: int, advanced: FALSE, range: [0,7], default: 4]
detection/scoretype = 4
# flag to indicate whether detector <connected> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected/enabled = FALSE
# flag to indicate whether detector <connected> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected/origenabled = FALSE
# flag to indicate whether detector <connected> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected/finishingenabled = FALSE
# flag to indicate whether detector <connected> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected/postprocessingenabled = FALSE
# flag to indicate whether detector <connected> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected/skip = FALSE
# flag to indicate whether detector <connected> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <connected> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/connected/legacymode = TRUE
# flag to indicate whether emphasis settings for detector <connected> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <connected>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/connected/freqcallround = 1
# maximum round the detector gets called in detection loop <connected>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/connected/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <connected>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/connected/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <connected>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/connected/origfreqcallround = 1
# maximum round the detector gets called in detection loop <connected>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/connected/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <connected>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/connected/origmincallround = 0
# priority of detector <connected>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/connected/priority = 0
# Controls whether SETPPC constraints chould be ignored while detecting and be directly placed in the master
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/connected/setppcinmaster = TRUE
# flag to indicate whether detector <constype> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/enabled = FALSE
# flag to indicate whether detector <constype> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/origenabled = FALSE
# flag to indicate whether detector <constype> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/finishingenabled = FALSE
# flag to indicate whether detector <constype> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/postprocessingenabled = FALSE
# flag to indicate whether detector <constype> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/skip = FALSE
# flag to indicate whether detector <constype> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <constype> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <constype> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/constype/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <constype>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/constype/freqcallround = 1
# maximum round the detector gets called in detection loop <constype>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/constype/maxcallround = 0
# minimum round the detector gets called in detection loop <constype>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/constype/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <constype>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/constype/origfreqcallround = 1
# maximum round the detector gets called in detection loop <constype>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/constype/origmaxcallround = 0
# minimum round the detector gets called in detection loop <constype>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/constype/origmincallround = 0
# priority of detector <constype>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/constype/priority = 0
# flag to indicate whether detector <postprocess> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/postprocess/enabled = FALSE
# flag to indicate whether detector <postprocess> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/postprocess/origenabled = FALSE
# flag to indicate whether detector <postprocess> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/postprocess/finishingenabled = FALSE
# flag to indicate whether detector <postprocess> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/postprocess/postprocessingenabled = TRUE
# flag to indicate whether detector <postprocess> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/postprocess/skip = FALSE
# flag to indicate whether detector <postprocess> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/postprocess/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <postprocess> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/postprocess/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <postprocess> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/postprocess/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <postprocess>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/postprocess/freqcallround = 1
# maximum round the detector gets called in detection loop <postprocess>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/postprocess/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <postprocess>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/postprocess/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <postprocess>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/postprocess/origfreqcallround = 1
# maximum round the detector gets called in detection loop <postprocess>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/postprocess/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <postprocess>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/postprocess/origmincallround = 0
# priority of detector <postprocess>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 1000000]
detection/detectors/postprocess/priority = 1000000
# should the constraint adjacency be used
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/postprocess/useconssadj = TRUE
# flag to indicate whether detector <consclass> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/consclass/enabled = TRUE
# flag to indicate whether detector <consclass> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/consclass/origenabled = TRUE
# flag to indicate whether detector <consclass> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consclass/finishingenabled = FALSE
# flag to indicate whether detector <consclass> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consclass/postprocessingenabled = FALSE
# flag to indicate whether detector <consclass> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consclass/skip = FALSE
# flag to indicate whether detector <consclass> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consclass/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <consclass> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consclass/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <consclass> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consclass/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <consclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/consclass/freqcallround = 1
# maximum round the detector gets called in detection loop <consclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/consclass/maxcallround = 0
# minimum round the detector gets called in detection loop <consclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/consclass/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <consclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/consclass/origfreqcallround = 1
# maximum round the detector gets called in detection loop <consclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/consclass/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <consclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/consclass/origmincallround = 0
# priority of detector <consclass>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/consclass/priority = 0
# maximum number of classes
# [type: int, advanced: FALSE, range: [1,2147483647], default: 5]
detection/detectors/consclass/maxnclasses = 5
# flag to indicate whether detector <consname> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/enabled = FALSE
# flag to indicate whether detector <consname> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/origenabled = FALSE
# flag to indicate whether detector <consname> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/finishingenabled = FALSE
# flag to indicate whether detector <consname> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/postprocessingenabled = FALSE
# flag to indicate whether detector <consname> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/skip = FALSE
# flag to indicate whether detector <consname> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <consname> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <consname> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/consname/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <consname>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/consname/freqcallround = 1
# maximum round the detector gets called in detection loop <consname>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/consname/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <consname>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/consname/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <consname>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/consname/origfreqcallround = 1
# maximum round the detector gets called in detection loop <consname>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/consname/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <consname>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/consname/origmincallround = 0
# priority of detector <consname>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/consname/priority = 0
# All cons whose name match this regular expression will be mastercons
# [type: string, advanced: FALSE, default: "(consname)(.*)"]
detection/detectors/consname/regex = "(consname)(.*)"
# flag to indicate whether detector <densemasterconss> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/densemasterconss/enabled = TRUE
# flag to indicate whether detector <densemasterconss> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/densemasterconss/origenabled = TRUE
# flag to indicate whether detector <densemasterconss> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/densemasterconss/finishingenabled = FALSE
# flag to indicate whether detector <densemasterconss> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/densemasterconss/postprocessingenabled = FALSE
# flag to indicate whether detector <densemasterconss> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/densemasterconss/skip = FALSE
# flag to indicate whether detector <densemasterconss> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/densemasterconss/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <densemasterconss> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/densemasterconss/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <densemasterconss> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/densemasterconss/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <densemasterconss>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/densemasterconss/freqcallround = 1
# maximum round the detector gets called in detection loop <densemasterconss>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/densemasterconss/maxcallround = 0
# minimum round the detector gets called in detection loop <densemasterconss>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/densemasterconss/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <densemasterconss>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/densemasterconss/origfreqcallround = 1
# maximum round the detector gets called in detection loop <densemasterconss>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/densemasterconss/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <densemasterconss>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/densemasterconss/origmincallround = 0
# priority of detector <densemasterconss>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/densemasterconss/priority = 0
# flag to indicate whether detector <stairheur> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/enabled = FALSE
# flag to indicate whether detector <stairheur> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/origenabled = FALSE
# flag to indicate whether detector <stairheur> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/finishingenabled = FALSE
# flag to indicate whether detector <stairheur> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/postprocessingenabled = FALSE
# flag to indicate whether detector <stairheur> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/skip = FALSE
# flag to indicate whether detector <stairheur> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <stairheur> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <stairheur> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <stairheur>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/stairheur/freqcallround = 1
# maximum round the detector gets called in detection loop <stairheur>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/stairheur/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <stairheur>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/stairheur/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <stairheur>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/stairheur/origfreqcallround = 1
# maximum round the detector gets called in detection loop <stairheur>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/stairheur/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <stairheur>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/stairheur/origmincallround = 0
# priority of detector <stairheur>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 1200]
detection/detectors/stairheur/priority = 1200
# The number of constraints per block (static blocking only)
# [type: int, advanced: FALSE, range: [2,1000000], default: 32]
detection/detectors/stairheur/nconssperblock = 32
# The maximal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 20]
detection/detectors/stairheur/maxblocks = 20
# The minimal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 2]
detection/detectors/stairheur/minblocks = 2
# The desired number of blocks. 0 means automatic determination of the number of blocks.
# [type: int, advanced: FALSE, range: [0,1000000], default: 0]
detection/detectors/stairheur/desiredblocks = 0
# Enable blocking type 'dynamic'
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/dynamicblocking = FALSE
# Enable blocking type 'static'
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/stairheur/staticblocking = TRUE
# Enable blocking type 'as soon as possible
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/stairheur/blockingassoonaspossible = FALSE
# Enables multiple decompositions for all enabled blocking types. Ranging from minblocks to maxblocks
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/stairheur/multipledecomps = TRUE
# The maximum number of iterations of the ROC-algorithm. -1 for no limit
# [type: int, advanced: FALSE, range: [-1,1000000], default: 1000000]
detection/detectors/stairheur/maxiterationsROC = 1000000
# flag to indicate whether detector <staircase> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase/enabled = FALSE
# flag to indicate whether detector <staircase> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase/origenabled = FALSE
# flag to indicate whether detector <staircase> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase/finishingenabled = FALSE
# flag to indicate whether detector <staircase> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase/postprocessingenabled = FALSE
# flag to indicate whether detector <staircase> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase/skip = FALSE
# flag to indicate whether detector <staircase> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <staircase> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/staircase/legacymode = TRUE
# flag to indicate whether emphasis settings for detector <staircase> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <staircase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/staircase/freqcallround = 1
# maximum round the detector gets called in detection loop <staircase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/staircase/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <staircase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/staircase/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <staircase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/staircase/origfreqcallround = 1
# maximum round the detector gets called in detection loop <staircase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/staircase/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <staircase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/staircase/origmincallround = 0
# priority of detector <staircase>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 200]
detection/detectors/staircase/priority = 200
# flag to indicate whether detector <random> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/enabled = FALSE
# flag to indicate whether detector <random> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/origenabled = FALSE
# flag to indicate whether detector <random> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/finishingenabled = FALSE
# flag to indicate whether detector <random> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/postprocessingenabled = FALSE
# flag to indicate whether detector <random> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/skip = FALSE
# flag to indicate whether detector <random> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <random> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <random> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/random/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <random>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/random/freqcallround = 1
# maximum round the detector gets called in detection loop <random>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/random/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <random>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/random/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <random>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/random/origfreqcallround = 1
# maximum round the detector gets called in detection loop <random>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/random/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <random>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/random/origmincallround = 0
# priority of detector <random>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: -10]
detection/detectors/random/priority = -10
# the maximal number of blocks, -1 defaults to avgconsperblock
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
detection/detectors/random/maxblocks = -1
# average constraints per block
# [type: int, advanced: FALSE, range: [1,10000], default: 100]
detection/detectors/random/avgconsperblock = 100
# flag to indicate whether detector <staircase_lsp> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/enabled = FALSE
# flag to indicate whether detector <staircase_lsp> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/origenabled = FALSE
# flag to indicate whether detector <staircase_lsp> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/finishingenabled = FALSE
# flag to indicate whether detector <staircase_lsp> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/postprocessingenabled = FALSE
# flag to indicate whether detector <staircase_lsp> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/skip = FALSE
# flag to indicate whether detector <staircase_lsp> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <staircase_lsp> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <staircase_lsp> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/staircase_lsp/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <staircase_lsp>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/staircase_lsp/freqcallround = 1
# maximum round the detector gets called in detection loop <staircase_lsp>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/staircase_lsp/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <staircase_lsp>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/staircase_lsp/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <staircase_lsp>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/staircase_lsp/origfreqcallround = 1
# maximum round the detector gets called in detection loop <staircase_lsp>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/staircase_lsp/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <staircase_lsp>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/staircase_lsp/origmincallround = 0
# priority of detector <staircase_lsp>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 200]
detection/detectors/staircase_lsp/priority = 200
# flag to indicate whether detector <colors> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/enabled = FALSE
# flag to indicate whether detector <colors> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/origenabled = FALSE
# flag to indicate whether detector <colors> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/finishingenabled = FALSE
# flag to indicate whether detector <colors> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/postprocessingenabled = FALSE
# flag to indicate whether detector <colors> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/skip = FALSE
# flag to indicate whether detector <colors> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <colors> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <colors> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/colors/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <colors>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/colors/freqcallround = 1
# maximum round the detector gets called in detection loop <colors>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/colors/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <colors>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/colors/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <colors>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/colors/origfreqcallround = 1
# maximum round the detector gets called in detection loop <colors>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/colors/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <colors>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/colors/origmincallround = 0
# priority of detector <colors>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/colors/priority = 0
# flag to indicate whether detector <cutpacking> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/enabled = FALSE
# flag to indicate whether detector <cutpacking> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/origenabled = FALSE
# flag to indicate whether detector <cutpacking> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/finishingenabled = FALSE
# flag to indicate whether detector <cutpacking> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/postprocessingenabled = FALSE
# flag to indicate whether detector <cutpacking> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/skip = FALSE
# flag to indicate whether detector <cutpacking> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <cutpacking> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <cutpacking> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <cutpacking>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/cutpacking/freqcallround = 1
# maximum round the detector gets called in detection loop <cutpacking>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/cutpacking/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <cutpacking>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/cutpacking/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <cutpacking>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/cutpacking/origfreqcallround = 1
# maximum round the detector gets called in detection loop <cutpacking>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/cutpacking/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <cutpacking>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/cutpacking/origmincallround = 0
# priority of detector <cutpacking>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 1100]
detection/detectors/cutpacking/priority = 1100
# should the Stoer-Wagner algorithm or metis be used for finding a minimal cut
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/cutpacking/algorithm = TRUE
# Should the blocks consist of a certain number of constraints
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/fixedblocks = FALSE
# number of constraints per block
# [type: int, advanced: FALSE, range: [1,2147483647], default: 200]
detection/detectors/cutpacking/blocksize = 200
# Whether to clean up temporary files
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/cutpacking/tidy = TRUE
# random seed for hmetis
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1]
detection/detectors/cutpacking/randomseed = 1
# Unbalance factor for metis
# [type: real, advanced: FALSE, range: [0,1e+20], default: 5]
detection/detectors/cutpacking/ubfactor = 5
# Should the metis output be displayed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/cutpacking/metisverbose = FALSE
# Should the rb or kway method be used for partitioning by metis
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/cutpacking/metisuseptyperb = TRUE
# flag to indicate whether detector <compgreedily> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/enabled = FALSE
# flag to indicate whether detector <compgreedily> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/origenabled = FALSE
# flag to indicate whether detector <compgreedily> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/finishingenabled = FALSE
# flag to indicate whether detector <compgreedily> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/postprocessingenabled = FALSE
# flag to indicate whether detector <compgreedily> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/skip = FALSE
# flag to indicate whether detector <compgreedily> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <compgreedily> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <compgreedily> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/compgreedily/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <compgreedily>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/compgreedily/freqcallround = 1
# maximum round the detector gets called in detection loop <compgreedily>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/compgreedily/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <compgreedily>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/compgreedily/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <compgreedily>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/compgreedily/origfreqcallround = 1
# maximum round the detector gets called in detection loop <compgreedily>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/compgreedily/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <compgreedily>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/compgreedily/origmincallround = 0
# priority of detector <compgreedily>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/compgreedily/priority = 0
# flag to indicate whether detector <mastersetcover> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/enabled = FALSE
# flag to indicate whether detector <mastersetcover> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/origenabled = FALSE
# flag to indicate whether detector <mastersetcover> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/finishingenabled = FALSE
# flag to indicate whether detector <mastersetcover> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/postprocessingenabled = FALSE
# flag to indicate whether detector <mastersetcover> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/skip = FALSE
# flag to indicate whether detector <mastersetcover> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <mastersetcover> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <mastersetcover> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetcover/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <mastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/mastersetcover/freqcallround = 1
# maximum round the detector gets called in detection loop <mastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/mastersetcover/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <mastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/mastersetcover/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <mastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/mastersetcover/origfreqcallround = 1
# maximum round the detector gets called in detection loop <mastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/mastersetcover/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <mastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/mastersetcover/origmincallround = 0
# priority of detector <mastersetcover>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/mastersetcover/priority = 0
# flag to indicate whether detector <mastersetpack> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/enabled = FALSE
# flag to indicate whether detector <mastersetpack> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/origenabled = FALSE
# flag to indicate whether detector <mastersetpack> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/finishingenabled = FALSE
# flag to indicate whether detector <mastersetpack> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/postprocessingenabled = FALSE
# flag to indicate whether detector <mastersetpack> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/skip = FALSE
# flag to indicate whether detector <mastersetpack> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <mastersetpack> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <mastersetpack> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpack/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <mastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/mastersetpack/freqcallround = 1
# maximum round the detector gets called in detection loop <mastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/mastersetpack/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <mastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/mastersetpack/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <mastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/mastersetpack/origfreqcallround = 1
# maximum round the detector gets called in detection loop <mastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/mastersetpack/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <mastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/mastersetpack/origmincallround = 0
# priority of detector <mastersetpack>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/mastersetpack/priority = 0
# flag to indicate whether detector <mastersetpart> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/enabled = FALSE
# flag to indicate whether detector <mastersetpart> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/origenabled = FALSE
# flag to indicate whether detector <mastersetpart> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/finishingenabled = FALSE
# flag to indicate whether detector <mastersetpart> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/postprocessingenabled = FALSE
# flag to indicate whether detector <mastersetpart> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/skip = FALSE
# flag to indicate whether detector <mastersetpart> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <mastersetpart> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <mastersetpart> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/mastersetpart/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <mastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/mastersetpart/freqcallround = 1
# maximum round the detector gets called in detection loop <mastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/mastersetpart/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <mastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/mastersetpart/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <mastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/mastersetpart/origfreqcallround = 1
# maximum round the detector gets called in detection loop <mastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/mastersetpart/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <mastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/mastersetpart/origmincallround = 0
# priority of detector <mastersetpart>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/mastersetpart/priority = 0
# flag to indicate whether detector <hcgpartition> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/enabled = FALSE
# flag to indicate whether detector <hcgpartition> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/origenabled = FALSE
# flag to indicate whether detector <hcgpartition> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/finishingenabled = FALSE
# flag to indicate whether detector <hcgpartition> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/postprocessingenabled = FALSE
# flag to indicate whether detector <hcgpartition> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/skip = FALSE
# flag to indicate whether detector <hcgpartition> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hcgpartition/usefullrecall = TRUE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <hcgpartition> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <hcgpartition> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <hcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hcgpartition/freqcallround = 1
# maximum round the detector gets called in detection loop <hcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hcgpartition/maxcallround = 0
# minimum round the detector gets called in detection loop <hcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hcgpartition/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <hcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hcgpartition/origfreqcallround = 1
# maximum round the detector gets called in detection loop <hcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hcgpartition/origmaxcallround = 0
# minimum round the detector gets called in detection loop <hcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hcgpartition/origmincallround = 0
# priority of detector <hcgpartition>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 1000]
detection/detectors/hcgpartition/priority = 1000
# The maximal number of block number candidates
# [type: int, advanced: FALSE, range: [0,1000000], default: 1]
detection/detectors/hcgpartition/maxnblockcandidates = 1
# The maximal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 20]
detection/detectors/hcgpartition/maxblocks = 20
# The minimal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 2]
detection/detectors/hcgpartition/minblocks = 2
# factor on how heavy equality (beta) and inequality constraints are measured
# [type: real, advanced: FALSE, range: [0,1], default: 0.5]
detection/detectors/hcgpartition/beta = 0.5
# factor on how heavy the standard deviation of the coefficients is measured
# [type: real, advanced: FALSE, range: [0,1e+20], default: 0]
detection/detectors/hcgpartition/alpha = 0
# Weight of a variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 1]
detection/detectors/hcgpartition/varWeight = 1
# Weight of a binary variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hcgpartition/varWeightBinary = 2
# Weight of a continuos variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 1]
detection/detectors/hcgpartition/varWeightContinous = 1
# Weight of a implicit integer variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hcgpartition/varWeightImplint = 2
# Weight of a integer variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hcgpartition/varWeightInteger = 2
# Weight of a constraint hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 5]
detection/detectors/hcgpartition/consWeight = 5
# Whether to clean up temporary files
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hcgpartition/tidy = TRUE
# random seed for hmetis
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1]
detection/detectors/hcgpartition/randomseed = 1
# percentage of dummy nodes for metis
# [type: real, advanced: FALSE, range: [0,1], default: 0.2]
detection/detectors/hcgpartition/dummynodes = 0.2
# Weight for constraint hyperedges that are setpartitioning or covering constraints
# [type: int, advanced: FALSE, range: [0,1000000], default: 5]
detection/detectors/hcgpartition/consWeightSetppc = 5
# Unbalance factor for metis
# [type: real, advanced: FALSE, range: [0,1e+20], default: 5]
detection/detectors/hcgpartition/ubfactor = 5
# Should the metis output be displayed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/metisverbose = FALSE
# Should the rb or kway method be used for partitioning by metis
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hcgpartition/metisuseptyperb = TRUE
# Should the problem be used for metis files or a temporary name
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hcgpartition/realname = FALSE
# flag to indicate whether detector <hrgpartition> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrgpartition/enabled = TRUE
# flag to indicate whether detector <hrgpartition> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrgpartition/origenabled = TRUE
# flag to indicate whether detector <hrgpartition> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/finishingenabled = FALSE
# flag to indicate whether detector <hrgpartition> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/postprocessingenabled = FALSE
# flag to indicate whether detector <hrgpartition> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/skip = FALSE
# flag to indicate whether detector <hrgpartition> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrgpartition/usefullrecall = TRUE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <hrgpartition> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <hrgpartition> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <hrgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hrgpartition/freqcallround = 1
# maximum round the detector gets called in detection loop <hrgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hrgpartition/maxcallround = 0
# minimum round the detector gets called in detection loop <hrgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hrgpartition/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <hrgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hrgpartition/origfreqcallround = 1
# maximum round the detector gets called in detection loop <hrgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hrgpartition/origmaxcallround = 0
# minimum round the detector gets called in detection loop <hrgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hrgpartition/origmincallround = 0
# priority of detector <hrgpartition>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 1000]
detection/detectors/hrgpartition/priority = 1000
# limit for sum of nvars and nconss for enabling this detector in default
# [type: int, advanced: TRUE, range: [0,2147483647], default: 10000]
detection/detectors/hrgpartition/limitnconssnvarsdefault = 10000
# should this detector be enabled even the limit nconssnvars is exceeded
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/enabledforlargeproblems = FALSE
# The maximal number of block number candidates
# [type: int, advanced: FALSE, range: [0,1000000], default: 3]
detection/detectors/hrgpartition/maxnblockcandidates = 3
# The maximal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 20]
detection/detectors/hrgpartition/maxblocks = 20
# The minimal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 2]
detection/detectors/hrgpartition/minblocks = 2
# factor on how heavy equality (beta) and inequality constraints are measured
# [type: real, advanced: FALSE, range: [0,1], default: 0.5]
detection/detectors/hrgpartition/beta = 0.5
# factor on how heavy the standard deviation of the coefficients is measured
# [type: real, advanced: FALSE, range: [0,1e+20], default: 0]
detection/detectors/hrgpartition/alpha = 0
# Weight of a variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 1]
detection/detectors/hrgpartition/varWeight = 1
# Weight of a binary variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hrgpartition/varWeightBinary = 2
# Weight of a continuos variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 1]
detection/detectors/hrgpartition/varWeightContinous = 1
# Weight of a implicit integer variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hrgpartition/varWeightImplint = 2
# Weight of a integer variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hrgpartition/varWeightInteger = 2
# Weight of a constraint hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 5]
detection/detectors/hrgpartition/consWeight = 5
# Whether to clean up temporary files
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrgpartition/tidy = TRUE
# random seed for hmetis
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1]
detection/detectors/hrgpartition/randomseed = 1
# percentage of dummy nodes for metis
# [type: real, advanced: FALSE, range: [0,1], default: 0.2]
detection/detectors/hrgpartition/dummynodes = 0.2
# Weight for constraint hyperedges that are setpartitioning or covering constraints
# [type: int, advanced: FALSE, range: [0,1000000], default: 5]
detection/detectors/hrgpartition/consWeightSetppc = 5
# Unbalance factor for metis
# [type: real, advanced: FALSE, range: [0,1e+20], default: 5]
detection/detectors/hrgpartition/ubfactor = 5
# Should the metis output be displayed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/metisverbose = FALSE
# Should the rb or kway method be used for partitioning by metis
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrgpartition/metisuseptyperb = TRUE
# Should the problem be used for metis files or a temporary name
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrgpartition/realname = FALSE
# flag to indicate whether detector <hrcgpartition> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/enabled = FALSE
# flag to indicate whether detector <hrcgpartition> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/origenabled = FALSE
# flag to indicate whether detector <hrcgpartition> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/finishingenabled = FALSE
# flag to indicate whether detector <hrcgpartition> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/postprocessingenabled = FALSE
# flag to indicate whether detector <hrcgpartition> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/skip = FALSE
# flag to indicate whether detector <hrcgpartition> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrcgpartition/usefullrecall = TRUE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <hrcgpartition> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrcgpartition/legacymode = TRUE
# flag to indicate whether emphasis settings for detector <hrcgpartition> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <hrcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hrcgpartition/freqcallround = 1
# maximum round the detector gets called in detection loop <hrcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hrcgpartition/maxcallround = 1
# minimum round the detector gets called in detection loop <hrcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hrcgpartition/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <hrcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hrcgpartition/origfreqcallround = 1
# maximum round the detector gets called in detection loop <hrcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/hrcgpartition/origmaxcallround = 1
# minimum round the detector gets called in detection loop <hrcgpartition>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/hrcgpartition/origmincallround = 0
# priority of detector <hrcgpartition>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 1000]
detection/detectors/hrcgpartition/priority = 1000
# The maximal number of block number candidates
# [type: int, advanced: FALSE, range: [0,1000000], default: 3]
detection/detectors/hrcgpartition/maxnblockcandidates = 3
# The maximal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 20]
detection/detectors/hrcgpartition/maxblocks = 20
# The minimal number of blocks
# [type: int, advanced: FALSE, range: [2,1000000], default: 2]
detection/detectors/hrcgpartition/minblocks = 2
# factor on how heavy equality (beta) and inequality constraints are measured
# [type: real, advanced: FALSE, range: [0,1], default: 0.5]
detection/detectors/hrcgpartition/beta = 0.5
# factor on how heavy the standard deviation of the coefficients is measured
# [type: real, advanced: FALSE, range: [0,1e+20], default: 0]
detection/detectors/hrcgpartition/alpha = 0
# Weight of a variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hrcgpartition/varWeight = 2
# Weight of a binary variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 3]
detection/detectors/hrcgpartition/varWeightBinary = 3
# Weight of a continuos variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 2]
detection/detectors/hrcgpartition/varWeightContinous = 2
# Weight of a implicit integer variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 3]
detection/detectors/hrcgpartition/varWeightImplint = 3
# Weight of a integer variable hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 3]
detection/detectors/hrcgpartition/varWeightInteger = 3
# Weight of a constraint hyperedge
# [type: int, advanced: FALSE, range: [0,1000000], default: 1]
detection/detectors/hrcgpartition/consWeight = 1
# Whether to clean up temporary files
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrcgpartition/tidy = TRUE
# random seed for hmetis
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 1]
detection/detectors/hrcgpartition/randomseed = 1
# percentage of dummy nodes for metis
# [type: real, advanced: FALSE, range: [0,1], default: 0.2]
detection/detectors/hrcgpartition/dummynodes = 0.2
# Weight for constraint hyperedges that are setpartitioning or covering constraints
# [type: int, advanced: FALSE, range: [0,1000000], default: 5]
detection/detectors/hrcgpartition/consWeightSetppc = 5
# Unbalance factor for metis
# [type: real, advanced: FALSE, range: [0,1e+20], default: 5]
detection/detectors/hrcgpartition/ubfactor = 5
# Should the metis output be displayed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/metisverbose = FALSE
# Should the rb or kway method be used for partitioning by metis
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/hrcgpartition/metisuseptyperb = TRUE
# Should the problem be used for metis files or a temporary name
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/hrcgpartition/realname = FALSE
# flag to indicate whether detector <connectedbase> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connectedbase/enabled = FALSE
# flag to indicate whether detector <connectedbase> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connectedbase/origenabled = FALSE
# flag to indicate whether detector <connectedbase> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/connectedbase/finishingenabled = TRUE
# flag to indicate whether detector <connectedbase> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connectedbase/postprocessingenabled = FALSE
# flag to indicate whether detector <connectedbase> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connectedbase/skip = FALSE
# flag to indicate whether detector <connectedbase> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connectedbase/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <connectedbase> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connectedbase/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <connectedbase> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connectedbase/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <connectedbase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/connectedbase/freqcallround = 1
# maximum round the detector gets called in detection loop <connectedbase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/connectedbase/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <connectedbase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/connectedbase/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <connectedbase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/connectedbase/origfreqcallround = 1
# maximum round the detector gets called in detection loop <connectedbase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/connectedbase/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <connectedbase>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/connectedbase/origmincallround = 0
# priority of detector <connectedbase>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/connectedbase/priority = 0
# should the constraint adjacency be used
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/connectedbase/useconssadj = TRUE
# flag to indicate whether detector <connected_nonewlinkingvars> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/enabled = FALSE
# flag to indicate whether detector <connected_nonewlinkingvars> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/origenabled = FALSE
# flag to indicate whether detector <connected_nonewlinkingvars> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/finishingenabled = FALSE
# flag to indicate whether detector <connected_nonewlinkingvars> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/postprocessingenabled = FALSE
# flag to indicate whether detector <connected_nonewlinkingvars> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/skip = FALSE
# flag to indicate whether detector <connected_nonewlinkingvars> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <connected_nonewlinkingvars> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <connected_nonewlinkingvars> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/connected_nonewlinkingvars/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <connected_nonewlinkingvars>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/connected_nonewlinkingvars/freqcallround = 1
# maximum round the detector gets called in detection loop <connected_nonewlinkingvars>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/connected_nonewlinkingvars/maxcallround = 2147483647
# minimum round the detector gets called in detection loop <connected_nonewlinkingvars>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/connected_nonewlinkingvars/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <connected_nonewlinkingvars>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/connected_nonewlinkingvars/origfreqcallround = 1
# maximum round the detector gets called in detection loop <connected_nonewlinkingvars>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/connected_nonewlinkingvars/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <connected_nonewlinkingvars>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/connected_nonewlinkingvars/origmincallround = 0
# priority of detector <connected_nonewlinkingvars>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/connected_nonewlinkingvars/priority = 0
# flag to indicate whether detector <generalmastersetpack> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/enabled = FALSE
# flag to indicate whether detector <generalmastersetpack> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/origenabled = FALSE
# flag to indicate whether detector <generalmastersetpack> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/finishingenabled = FALSE
# flag to indicate whether detector <generalmastersetpack> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/postprocessingenabled = FALSE
# flag to indicate whether detector <generalmastersetpack> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/skip = FALSE
# flag to indicate whether detector <generalmastersetpack> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <generalmastersetpack> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <generalmastersetpack> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpack/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <generalmastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/generalmastersetpack/freqcallround = 1
# maximum round the detector gets called in detection loop <generalmastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpack/maxcallround = 0
# minimum round the detector gets called in detection loop <generalmastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpack/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <generalmastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/generalmastersetpack/origfreqcallround = 1
# maximum round the detector gets called in detection loop <generalmastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpack/origmaxcallround = 0
# minimum round the detector gets called in detection loop <generalmastersetpack>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpack/origmincallround = 0
# priority of detector <generalmastersetpack>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/generalmastersetpack/priority = 0
# flag to indicate whether detector <generalmastersetpart> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/enabled = FALSE
# flag to indicate whether detector <generalmastersetpart> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/origenabled = FALSE
# flag to indicate whether detector <generalmastersetpart> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/finishingenabled = FALSE
# flag to indicate whether detector <generalmastersetpart> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/postprocessingenabled = FALSE
# flag to indicate whether detector <generalmastersetpart> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/skip = FALSE
# flag to indicate whether detector <generalmastersetpart> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <generalmastersetpart> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <generalmastersetpart> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetpart/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <generalmastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/generalmastersetpart/freqcallround = 1
# maximum round the detector gets called in detection loop <generalmastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpart/maxcallround = 0
# minimum round the detector gets called in detection loop <generalmastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpart/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <generalmastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/generalmastersetpart/origfreqcallround = 1
# maximum round the detector gets called in detection loop <generalmastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpart/origmaxcallround = 0
# minimum round the detector gets called in detection loop <generalmastersetpart>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetpart/origmincallround = 0
# priority of detector <generalmastersetpart>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/generalmastersetpart/priority = 0
# flag to indicate whether detector <generalmastersetcover> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/enabled = FALSE
# flag to indicate whether detector <generalmastersetcover> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/origenabled = FALSE
# flag to indicate whether detector <generalmastersetcover> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/finishingenabled = FALSE
# flag to indicate whether detector <generalmastersetcover> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/postprocessingenabled = FALSE
# flag to indicate whether detector <generalmastersetcover> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/skip = FALSE
# flag to indicate whether detector <generalmastersetcover> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <generalmastersetcover> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <generalmastersetcover> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/generalmastersetcover/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <generalmastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/generalmastersetcover/freqcallround = 1
# maximum round the detector gets called in detection loop <generalmastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetcover/maxcallround = 0
# minimum round the detector gets called in detection loop <generalmastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetcover/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <generalmastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/generalmastersetcover/origfreqcallround = 1
# maximum round the detector gets called in detection loop <generalmastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetcover/origmaxcallround = 0
# minimum round the detector gets called in detection loop <generalmastersetcover>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/generalmastersetcover/origmincallround = 0
# priority of detector <generalmastersetcover>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/generalmastersetcover/priority = 0
# flag to indicate whether detector <varclass> is enabled
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/varclass/enabled = TRUE
# flag to indicate whether detector <varclass> is enabled for detecting in the original problem
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
detection/detectors/varclass/origenabled = TRUE
# flag to indicate whether detector <varclass> is enabled for finishing of incomplete decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/varclass/finishingenabled = FALSE
# flag to indicate whether detector <varclass> is enabled for postprocessing of finished decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/varclass/postprocessingenabled = FALSE
# flag to indicate whether detector <varclass> should be skipped if others found decompositions
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/varclass/skip = FALSE
# flag to indicate whether detector <varclass> should be called on descendants of the current seeed
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/varclass/usefullrecall = FALSE
# flag to indicate whether (old) DETECTSTRUCTURE method of detector <varclass> should also be used for detection
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/varclass/legacymode = FALSE
# flag to indicate whether emphasis settings for detector <varclass> should be overruled by normal settings
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
detection/detectors/varclass/overruleemphasis = FALSE
# frequency the detector gets called in detection loop ,ie it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <varclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/varclass/freqcallround = 1
# maximum round the detector gets called in detection loop <varclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/varclass/maxcallround = 0
# minimum round the detector gets called in detection loop <varclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/varclass/mincallround = 0
# frequency the detector gets called in detection loop,i.e., it is called in round r if and only if minCallRound <= r <= maxCallRound AND (r - minCallRound) mod freqCallRound == 0 <varclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1]
detection/detectors/varclass/origfreqcallround = 1
# maximum round the detector gets called in detection loop <varclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 2147483647]
detection/detectors/varclass/origmaxcallround = 2147483647
# minimum round the detector gets called in detection loop <varclass>
# [type: int, advanced: FALSE, range: [0,2147483647], default: 0]
detection/detectors/varclass/origmincallround = 0
# priority of detector <varclass>
# [type: int, advanced: FALSE, range: [-2147483648,2147483647], default: 0]
detection/detectors/varclass/priority = 0
# maximum number of classes
# [type: int, advanced: FALSE, range: [1,2147483647], default: 8]
detection/detectors/varclass/maxnclasses = 8
# priority of heuristic <gcgcoefdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1001000]
heuristics/gcgcoefdiving/priority = -1001000
# frequency for calling primal heuristic <gcgcoefdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/gcgcoefdiving/freq = 10
# frequency offset for calling primal heuristic <gcgcoefdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 1]
heuristics/gcgcoefdiving/freqofs = 1
# maximal depth level to call primal heuristic <gcgcoefdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgcoefdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/gcgcoefdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/gcgcoefdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/gcgcoefdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/gcgcoefdiving/maxlpiterofs = 1000
# maximal number of allowed pricing rounds (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
heuristics/gcgcoefdiving/maxpricerounds = 0
# perform pricing only if infeasibility is encountered
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgcoefdiving/usefarkasonly = FALSE
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/gcgcoefdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgcoefdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/gcgcoefdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgcoefdiving/maxdiveavgquotnosol = 0
# try to branch the diving variable in the other direction in case of infeasibility
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgcoefdiving/otherdirection = TRUE
# single backtracking by choosing another variable in case of infeasibility
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgcoefdiving/backtrack = FALSE
# maximal depth until which a limited discrepancy search is performed
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
heuristics/gcgcoefdiving/maxdiscdepth = 0
# maximal discrepancy allowed in backtracking and limited discrepancy search
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
heuristics/gcgcoefdiving/maxdiscrepancy = 2
# calculate the number of locks w.r.t. the master LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgcoefdiving/usemasterlocks = FALSE
# priority of heuristic <gcgfracdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1003000]
heuristics/gcgfracdiving/priority = -1003000
# frequency for calling primal heuristic <gcgfracdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/gcgfracdiving/freq = 10
# frequency offset for calling primal heuristic <gcgfracdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 3]
heuristics/gcgfracdiving/freqofs = 3
# maximal depth level to call primal heuristic <gcgfracdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgfracdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/gcgfracdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/gcgfracdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/gcgfracdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/gcgfracdiving/maxlpiterofs = 1000
# maximal number of allowed pricing rounds (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
heuristics/gcgfracdiving/maxpricerounds = 0
# perform pricing only if infeasibility is encountered
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgfracdiving/usefarkasonly = FALSE
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/gcgfracdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgfracdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/gcgfracdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgfracdiving/maxdiveavgquotnosol = 0
# try to branch the diving variable in the other direction in case of infeasibility
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgfracdiving/otherdirection = TRUE
# single backtracking by choosing another variable in case of infeasibility
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgfracdiving/backtrack = FALSE
# maximal depth until which a limited discrepancy search is performed
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
heuristics/gcgfracdiving/maxdiscdepth = 0
# maximal discrepancy allowed in backtracking and limited discrepancy search
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
heuristics/gcgfracdiving/maxdiscrepancy = 2
# calculate the fractionalities w.r.t. the master LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgfracdiving/usemasterfracs = FALSE
# priority of heuristic <gcgguideddiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1007000]
heuristics/gcgguideddiving/priority = -1007000
# frequency for calling primal heuristic <gcgguideddiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/gcgguideddiving/freq = 10
# frequency offset for calling primal heuristic <gcgguideddiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 7]
heuristics/gcgguideddiving/freqofs = 7
# maximal depth level to call primal heuristic <gcgguideddiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgguideddiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/gcgguideddiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/gcgguideddiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/gcgguideddiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/gcgguideddiving/maxlpiterofs = 1000
# maximal number of allowed pricing rounds (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
heuristics/gcgguideddiving/maxpricerounds = 0
# perform pricing only if infeasibility is encountered
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgguideddiving/usefarkasonly = FALSE
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/gcgguideddiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgguideddiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/gcgguideddiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgguideddiving/maxdiveavgquotnosol = 0
# try to branch the diving variable in the other direction in case of infeasibility
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgguideddiving/otherdirection = TRUE
# single backtracking by choosing another variable in case of infeasibility
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgguideddiving/backtrack = FALSE
# maximal depth until which a limited discrepancy search is performed
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
heuristics/gcgguideddiving/maxdiscdepth = 0
# maximal discrepancy allowed in backtracking and limited discrepancy search
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
heuristics/gcgguideddiving/maxdiscrepancy = 2
# calculate the fractionalities w.r.t. the master LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgguideddiving/usemasterfracs = FALSE
# priority of heuristic <gcglinesdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1006000]
heuristics/gcglinesdiving/priority = -1006000
# frequency for calling primal heuristic <gcglinesdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/gcglinesdiving/freq = 10
# frequency offset for calling primal heuristic <gcglinesdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 6]
heuristics/gcglinesdiving/freqofs = 6
# maximal depth level to call primal heuristic <gcglinesdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcglinesdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/gcglinesdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/gcglinesdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/gcglinesdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/gcglinesdiving/maxlpiterofs = 1000
# maximal number of allowed pricing rounds (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
heuristics/gcglinesdiving/maxpricerounds = 0
# perform pricing only if infeasibility is encountered
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcglinesdiving/usefarkasonly = FALSE
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/gcglinesdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcglinesdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/gcglinesdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcglinesdiving/maxdiveavgquotnosol = 0
# try to branch the diving variable in the other direction in case of infeasibility
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcglinesdiving/otherdirection = TRUE
# single backtracking by choosing another variable in case of infeasibility
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcglinesdiving/backtrack = FALSE
# maximal depth until which a limited discrepancy search is performed
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
heuristics/gcglinesdiving/maxdiscdepth = 0
# maximal discrepancy allowed in backtracking and limited discrepancy search
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
heuristics/gcglinesdiving/maxdiscrepancy = 2
# priority of heuristic <gcgpscostdiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1002000]
heuristics/gcgpscostdiving/priority = -1002000
# frequency for calling primal heuristic <gcgpscostdiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/gcgpscostdiving/freq = 10
# frequency offset for calling primal heuristic <gcgpscostdiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 2]
heuristics/gcgpscostdiving/freqofs = 2
# maximal depth level to call primal heuristic <gcgpscostdiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgpscostdiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/gcgpscostdiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/gcgpscostdiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/gcgpscostdiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/gcgpscostdiving/maxlpiterofs = 1000
# maximal number of allowed pricing rounds (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
heuristics/gcgpscostdiving/maxpricerounds = 0
# perform pricing only if infeasibility is encountered
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgpscostdiving/usefarkasonly = FALSE
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/gcgpscostdiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgpscostdiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/gcgpscostdiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgpscostdiving/maxdiveavgquotnosol = 0
# try to branch the diving variable in the other direction in case of infeasibility
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgpscostdiving/otherdirection = TRUE
# single backtracking by choosing another variable in case of infeasibility
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgpscostdiving/backtrack = FALSE
# maximal depth until which a limited discrepancy search is performed
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
heuristics/gcgpscostdiving/maxdiscdepth = 0
# maximal discrepancy allowed in backtracking and limited discrepancy search
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
heuristics/gcgpscostdiving/maxdiscrepancy = 2
# shall pseudocosts be calculated w.r.t. the master problem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgpscostdiving/usemasterpscosts = FALSE
# priority of heuristic <gcgveclendiving>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1003100]
heuristics/gcgveclendiving/priority = -1003100
# frequency for calling primal heuristic <gcgveclendiving> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/gcgveclendiving/freq = 10
# frequency offset for calling primal heuristic <gcgveclendiving>
# [type: int, advanced: FALSE, range: [0,65534], default: 4]
heuristics/gcgveclendiving/freqofs = 4
# maximal depth level to call primal heuristic <gcgveclendiving> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgveclendiving/maxdepth = -1
# minimal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 0]
heuristics/gcgveclendiving/minreldepth = 0
# maximal relative depth to start diving
# [type: real, advanced: TRUE, range: [0,1], default: 1]
heuristics/gcgveclendiving/maxreldepth = 1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.05]
heuristics/gcgveclendiving/maxlpiterquot = 0.05
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/gcgveclendiving/maxlpiterofs = 1000
# maximal number of allowed pricing rounds (-1: no limit)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: 0]
heuristics/gcgveclendiving/maxpricerounds = 0
# perform pricing only if infeasibility is encountered
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgveclendiving/usefarkasonly = FALSE
# maximal quotient (curlowerbound - lowerbound)/(cutoffbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.8]
heuristics/gcgveclendiving/maxdiveubquot = 0.8
# maximal quotient (curlowerbound - lowerbound)/(avglowerbound - lowerbound) where diving is performed (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgveclendiving/maxdiveavgquot = 0
# maximal UBQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1], default: 0.1]
heuristics/gcgveclendiving/maxdiveubquotnosol = 0.1
# maximal AVGQUOT when no solution was found yet (0.0: no limit)
# [type: real, advanced: TRUE, range: [0,1.79769313486232e+308], default: 0]
heuristics/gcgveclendiving/maxdiveavgquotnosol = 0
# try to branch the diving variable in the other direction in case of infeasibility
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgveclendiving/otherdirection = TRUE
# single backtracking by choosing another variable in case of infeasibility
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgveclendiving/backtrack = FALSE
# maximal depth until which a limited discrepancy search is performed
# [type: int, advanced: TRUE, range: [0,2147483647], default: 0]
heuristics/gcgveclendiving/maxdiscdepth = 0
# maximal discrepancy allowed in backtracking and limited discrepancy search
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
heuristics/gcgveclendiving/maxdiscrepancy = 2
# calculate vector length scores w.r.t. the master LP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgveclendiving/usemasterscores = FALSE
# priority of heuristic <gcgdins>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1105000]
heuristics/gcgdins/priority = -1105000
# frequency for calling primal heuristic <gcgdins> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/gcgdins/freq = -1
# frequency offset for calling primal heuristic <gcgdins>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/gcgdins/freqofs = 0
# maximal depth level to call primal heuristic <gcgdins> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgdins/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 5000]
heuristics/gcgdins/nodesofs = 5000
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.05]
heuristics/gcgdins/nodesquot = 0.05
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 500]
heuristics/gcgdins/minnodes = 500
# number of pool-solutions to be checked for flag array update (for hard fixing of binary variables)
# [type: int, advanced: FALSE, range: [1,2147483647], default: 5]
heuristics/gcgdins/solnum = 5
# radius (using Manhattan metric) of the incumbent's neighborhood to be searched
# [type: int, advanced: FALSE, range: [1,2147483647], default: 18]
heuristics/gcgdins/neighborhoodsize = 18
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 5000]
heuristics/gcgdins/maxnodes = 5000
# factor by which gcgdins should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/gcgdins/minimprove = 0.01
# number of nodes without incumbent change that heuristic should wait
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 0]
heuristics/gcgdins/nwaitingnodes = 0
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgdins/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgdins/copycuts = TRUE
# priority of heuristic <gcgfeaspump>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1000000]
heuristics/gcgfeaspump/priority = -1000000
# frequency for calling primal heuristic <gcgfeaspump> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/gcgfeaspump/freq = -1
# frequency offset for calling primal heuristic <gcgfeaspump>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/gcgfeaspump/freqofs = 0
# maximal depth level to call primal heuristic <gcgfeaspump> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgfeaspump/maxdepth = -1
# maximal fraction of diving LP iterations compared to node LP iterations
# [type: real, advanced: FALSE, range: [0,1.79769313486232e+308], default: 0.01]
heuristics/gcgfeaspump/maxlpiterquot = 0.01
# factor by which the regard of the objective is decreased in each round, 1.0 for dynamic
# [type: real, advanced: FALSE, range: [0,1], default: 1]
heuristics/gcgfeaspump/objfactor = 1
# threshold difference for the convex parameter to perform perturbation
# [type: real, advanced: FALSE, range: [0,1], default: 1]
heuristics/gcgfeaspump/alphadiff = 1
# additional number of allowed LP iterations
# [type: int, advanced: FALSE, range: [0,2147483647], default: 1000]
heuristics/gcgfeaspump/maxlpiterofs = 1000
# total number of feasible solutions found up to which heuristic is called (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
heuristics/gcgfeaspump/maxsols = 10
# maximal number of pumping loops (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10000]
heuristics/gcgfeaspump/maxloops = 10000
# maximal number of pumping rounds without fractionality improvement (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 10]
heuristics/gcgfeaspump/maxstallloops = 10
# minimum number of random variables to flip, if a 1-cycle is encountered
# [type: int, advanced: TRUE, range: [1,2147483647], default: 10]
heuristics/gcgfeaspump/minflips = 10
# maximum length of cycles to be checked explicitly in each round
# [type: int, advanced: TRUE, range: [1,100], default: 3]
heuristics/gcgfeaspump/cyclelength = 3
# number of iterations until a random perturbation is forced
# [type: int, advanced: TRUE, range: [1,2147483647], default: 100]
heuristics/gcgfeaspump/perturbfreq = 100
# radius (using Manhattan metric) of the neighborhood to be searched in stage 3
# [type: int, advanced: FALSE, range: [1,2147483647], default: 18]
heuristics/gcgfeaspump/neighborhoodsize = 18
# should an iterative round-and-propagate scheme be used to find the integral points?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgfeaspump/usefp20 = FALSE
# should a random perturbation be performed if a feasible solution was found?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgfeaspump/pertsolfound = TRUE
# should we solve a local branching sub-MIP if no solution could be found?
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgfeaspump/stage3 = FALSE
# should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgfeaspump/copycuts = TRUE
# priority of heuristic <gcgrens>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1100000]
heuristics/gcgrens/priority = -1100000
# frequency for calling primal heuristic <gcgrens> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/gcgrens/freq = 0
# frequency offset for calling primal heuristic <gcgrens>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/gcgrens/freqofs = 0
# maximal depth level to call primal heuristic <gcgrens> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgrens/maxdepth = -1
# minimum percentage of integer variables that have to be fixable
# [type: real, advanced: FALSE, range: [0,1], default: 0.5]
heuristics/gcgrens/minfixingrate = 0.5
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 5000]
heuristics/gcgrens/maxnodes = 5000
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 500]
heuristics/gcgrens/nodesofs = 500
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 500]
heuristics/gcgrens/minnodes = 500
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/gcgrens/nodesquot = 0.1
# factor by which RENS should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/gcgrens/minimprove = 0.01
# should general integers get binary bounds [floor(.),ceil(.)] ?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgrens/binarybounds = TRUE
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgrens/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgrens/copycuts = TRUE
# should all subproblem solutions be added to the original SCIP?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgrens/addallsols = FALSE
# priority of heuristic <gcgrins>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1101000]
heuristics/gcgrins/priority = -1101000
# frequency for calling primal heuristic <gcgrins> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 20]
heuristics/gcgrins/freq = 20
# frequency offset for calling primal heuristic <gcgrins>
# [type: int, advanced: FALSE, range: [0,65534], default: 5]
heuristics/gcgrins/freqofs = 5
# maximal depth level to call primal heuristic <gcgrins> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgrins/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: int, advanced: FALSE, range: [0,2147483647], default: 500]
heuristics/gcgrins/nodesofs = 500
# maximum number of nodes to regard in the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 5000]
heuristics/gcgrins/maxnodes = 5000
# minimum number of nodes required to start the subproblem
# [type: int, advanced: TRUE, range: [0,2147483647], default: 500]
heuristics/gcgrins/minnodes = 500
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/gcgrins/nodesquot = 0.1
# number of nodes without incumbent change that heuristic should wait
# [type: int, advanced: TRUE, range: [0,2147483647], default: 200]
heuristics/gcgrins/nwaitingnodes = 200
# factor by which gcgrins should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/gcgrins/minimprove = 0.01
# minimum percentage of integer variables that have to be fixed
# [type: real, advanced: FALSE, range: [0,1], default: 0]
heuristics/gcgrins/minfixingrate = 0
# should subproblem be created out of the rows in the LP rows?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/gcgrins/uselprows = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgrins/copycuts = TRUE
# priority of heuristic <gcgrounding>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1000]
heuristics/gcgrounding/priority = -1000
# frequency for calling primal heuristic <gcgrounding> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/gcgrounding/freq = 1
# frequency offset for calling primal heuristic <gcgrounding>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/gcgrounding/freqofs = 0
# maximal depth level to call primal heuristic <gcgrounding> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgrounding/maxdepth = -1
# number of calls per found solution that are considered as standard success, a higher factor causes the heuristic to be called more often
# [type: int, advanced: TRUE, range: [-1,2147483647], default: 100]
heuristics/gcgrounding/successfactor = 100
# priority of heuristic <gcgshifting>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -5000]
heuristics/gcgshifting/priority = -5000
# frequency for calling primal heuristic <gcgshifting> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 10]
heuristics/gcgshifting/freq = 10
# frequency offset for calling primal heuristic <gcgshifting>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/gcgshifting/freqofs = 0
# maximal depth level to call primal heuristic <gcgshifting> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgshifting/maxdepth = -1
# priority of heuristic <gcgsimplerounding>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: 0]
heuristics/gcgsimplerounding/priority = 0
# frequency for calling primal heuristic <gcgsimplerounding> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 1]
heuristics/gcgsimplerounding/freq = 1
# frequency offset for calling primal heuristic <gcgsimplerounding>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/gcgsimplerounding/freqofs = 0
# maximal depth level to call primal heuristic <gcgsimplerounding> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgsimplerounding/maxdepth = -1
# priority of heuristic <gcgzirounding>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -500]
heuristics/gcgzirounding/priority = -500
# frequency for calling primal heuristic <gcgzirounding> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: -1]
heuristics/gcgzirounding/freq = -1
# frequency offset for calling primal heuristic <gcgzirounding>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/gcgzirounding/freqofs = 0
# maximal depth level to call primal heuristic <gcgzirounding> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/gcgzirounding/maxdepth = -1
# determines maximum number of rounding loops
# [type: int, advanced: TRUE, range: [0,2147483647], default: 2]
heuristics/gcgzirounding/maxroundingloops = 2
# flag to determine if Zirounding is deactivated after a certain percentage of unsuccessful calls
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/gcgzirounding/stopziround = TRUE
# if percentage of found solutions falls below this parameter, Zirounding will be deactivated
# [type: real, advanced: TRUE, range: [0,1], default: 0.02]
heuristics/gcgzirounding/stoppercentage = 0.02
# determines the minimum number of calls before percentage-based deactivation of Zirounding is applied
# [type: int, advanced: TRUE, range: [1,2147483647], default: 1000]
heuristics/gcgzirounding/minstopncalls = 1000
# priority of heuristic <xpcrossover>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1100500]
heuristics/xpcrossover/priority = -1100500
# frequency for calling primal heuristic <xpcrossover> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/xpcrossover/freq = 0
# frequency offset for calling primal heuristic <xpcrossover>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/xpcrossover/freqofs = 0
# maximal depth level to call primal heuristic <xpcrossover> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/xpcrossover/maxdepth = -1
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 200]
heuristics/xpcrossover/nodesofs = 200
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 1000]
heuristics/xpcrossover/maxnodes = 1000
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 200]
heuristics/xpcrossover/minnodes = 200
# number of extreme pts per block that will be taken into account
# [type: int, advanced: FALSE, range: [2,2147483647], default: 4]
heuristics/xpcrossover/nusedpts = 4
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/xpcrossover/nodesquot = 0.1
# minimum percentage of integer variables that have to be fixed
# [type: real, advanced: FALSE, range: [0,1], default: 0.4]
heuristics/xpcrossover/minfixingrate = 0.4
# factor by which crossover should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/xpcrossover/minimprove = 0.01
# should the choice which sols to take be randomized?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/xpcrossover/randomization = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/xpcrossover/copycuts = TRUE
# priority of heuristic <xprins>
# [type: int, advanced: TRUE, range: [-536870912,536870911], default: -1100600]
heuristics/xprins/priority = -1100600
# frequency for calling primal heuristic <xprins> (-1: never, 0: only at depth freqofs)
# [type: int, advanced: FALSE, range: [-1,65534], default: 0]
heuristics/xprins/freq = 0
# frequency offset for calling primal heuristic <xprins>
# [type: int, advanced: FALSE, range: [0,65534], default: 0]
heuristics/xprins/freqofs = 0
# maximal depth level to call primal heuristic <xprins> (-1: no limit)
# [type: int, advanced: TRUE, range: [-1,65534], default: -1]
heuristics/xprins/maxdepth = -1
# minimum percentage of coincidence of relaxation and extreme pts
# [type: real, advanced: FALSE, range: [0,1], default: 0.5]
heuristics/xprins/equalityrate = 0.5
# number of nodes added to the contingent of the total nodes
# [type: longint, advanced: FALSE, range: [0,9223372036854775807], default: 200]
heuristics/xprins/nodesofs = 200
# maximum number of nodes to regard in the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 1000]
heuristics/xprins/maxnodes = 1000
# minimum number of nodes required to start the subproblem
# [type: longint, advanced: TRUE, range: [0,9223372036854775807], default: 200]
heuristics/xprins/minnodes = 200
# number of extreme pts per block that will be taken into account (-1: all; 0: all which contribute to current relaxation solution)
# [type: int, advanced: FALSE, range: [-1,2147483647], default: -1]
heuristics/xprins/nusedpts = -1
# contingent of sub problem nodes in relation to the number of nodes of the original problem
# [type: real, advanced: FALSE, range: [0,1], default: 0.1]
heuristics/xprins/nodesquot = 0.1
# minimum percentage of integer variables that have to be fixed
# [type: real, advanced: FALSE, range: [0,1], default: 0.4]
heuristics/xprins/minfixingrate = 0.4
# factor by which crossover should at least improve the incumbent
# [type: real, advanced: TRUE, range: [0,1], default: 0.01]
heuristics/xprins/minimprove = 0.01
# should the choice which sols to take be randomized?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: FALSE]
heuristics/xprins/randomization = FALSE
# if uselprows == FALSE, should all active cuts from cutpool be copied to constraints in subproblem?
# [type: bool, advanced: TRUE, range: {TRUE,FALSE}, default: TRUE]
heuristics/xprins/copycuts = TRUE
# display activation status of display column <solfound> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/solfound/active = 1
# display activation status of display column <time> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/time/active = 1
# display activation status of display column <nnodes> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/nnodes/active = 1
# display activation status of display column <nodesleft> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/nodesleft/active = 1
# display activation status of display column <lpiterations> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/lpiterations/active = 1
# display activation status of display column <lpavgiterations> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/lpavgiterations/active = 1
# display activation status of display column <lpcond> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/lpcond/active = 1
# display activation status of display column <memused> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/memused/active = 1
# display activation status of display column <depth> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/depth/active = 1
# display activation status of display column <maxdepth> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/maxdepth/active = 1
# display activation status of display column <plungedepth> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/plungedepth/active = 1
# display activation status of display column <nfrac> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/nfrac/active = 1
# display activation status of display column <nexternbranchcands> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/nexternbranchcands/active = 1
# display activation status of display column <vars> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/vars/active = 1
# display activation status of display column <conss> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/conss/active = 1
# display activation status of display column <curconss> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/curconss/active = 1
# display activation status of display column <curcols> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/curcols/active = 1
# display activation status of display column <currows> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/currows/active = 1
# display activation status of display column <cuts> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/cuts/active = 1
# display activation status of display column <separounds> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/separounds/active = 1
# display activation status of display column <poolsize> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/poolsize/active = 1
# display activation status of display column <conflicts> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/conflicts/active = 1
# display activation status of display column <strongbranchs> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/strongbranchs/active = 1
# display activation status of display column <pseudoobj> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/pseudoobj/active = 1
# display activation status of display column <lpobj> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/lpobj/active = 1
# display activation status of display column <curdualbound> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/curdualbound/active = 1
# display activation status of display column <estimate> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/estimate/active = 1
# display activation status of display column <avgdualbound> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/avgdualbound/active = 1
# display activation status of display column <dualbound> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/dualbound/active = 1
# display activation status of display column <primalbound> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/primalbound/active = 1
# display activation status of display column <cutoffbound> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/cutoffbound/active = 1
# display activation status of display column <gap> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/gap/active = 1
# display activation status of display column <primalgap> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 0]
display/primalgap/active = 0
# display activation status of display column <nsols> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/nsols/active = 1
# display activation status of display column <mlpiterations> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/mlpiterations/active = 1
# display activation status of display column <mvars> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/mvars/active = 1
# display activation status of display column <mconss> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/mconss/active = 1
# display activation status of display column <mcuts> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/mcuts/active = 1
# display activation status of display column <degeneracy> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/degeneracy/active = 1
# display activation status of display column <sumlpiterations> (0: off, 1: auto, 2:on)
# [type: int, advanced: FALSE, range: [0,2], default: 1]
display/sumlpiterations/active = 1
# is statistics table <status> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/status/active = TRUE
# is statistics table <timing> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/timing/active = TRUE
# is statistics table <origprob> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/origprob/active = TRUE
# is statistics table <presolvedprob> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/presolvedprob/active = TRUE
# is statistics table <presolver> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/presolver/active = TRUE
# is statistics table <constraint> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/constraint/active = TRUE
# is statistics table <constiming> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/constiming/active = TRUE
# is statistics table <propagator> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/propagator/active = TRUE
# is statistics table <conflict> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/conflict/active = TRUE
# is statistics table <separator> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/separator/active = TRUE
# is statistics table <pricer> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/pricer/active = TRUE
# is statistics table <branchrules> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/branchrules/active = TRUE
# is statistics table <heuristics> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/heuristics/active = TRUE
# is statistics table <compression> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/compression/active = TRUE
# is statistics table <benders> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/benders/active = TRUE
# is statistics table <lp> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/lp/active = TRUE
# is statistics table <nlp> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/nlp/active = TRUE
# is statistics table <relaxator> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/relaxator/active = TRUE
# is statistics table <tree> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/tree/active = TRUE
# is statistics table <root> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/root/active = TRUE
# is statistics table <solution> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/solution/active = TRUE
# is statistics table <concurrentsolver> active
# [type: bool, advanced: FALSE, range: {TRUE,FALSE}, default: TRUE]
table/concurrentsolver/active = TRUE